Supermicro Supero SUPERSERVER 2027PR-DTR Bedienungsanleitung

SUPERSERVER

2027PR-DTR

2027PR-DTFR

2027PR-DTTR

SUPER

USER'S MANUAL

Revision 1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: September 11, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer

2027PR-DTR/DTFR/DTTR. Installation and maintainance should be performed by

experienced technicians only.

The SuperServer 2027PR-DTR/DTFR/DTTR is a high-end server based on the

SC217HD+-R1K28B 2U rackmount chassis and the X9DRT-P/PIBF/PT dual

processor serverboards. All models have an IPMI LAN port and two serverboard

nodes, each with six hot-swap Hard Disk Drives (HDD) each per node.

Each of the various models of the SuperServer 2027PR-DTR/DTFR/DTTR servers

and their associated serverboards for each of their unique options are listed in the

table below:

SUPERSERVER 2027PR-DTR/DTFR/DTTR Model Variations

Server

Model X9DRT

Serverboard InﬁniBand 10G Ethernet

2027PR-DTR X9DRT-P

2027PR-DTFR X9DRT-PIBF YES

2027PR-DTTR X9DRT-PT YES

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with

the server system and describes the main features of the X9DRT-P/PIBF/PT

serverboard and the SC217HD+-R1K28B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer

2027PR-DTR/DTFR/DTTR into a rack and check out the server conﬁguration prior to

powering up the system. If your server was ordered without processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 2027PR-DTR/DTFR/DTTR.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X9DRT-P/PIBF/PT serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC217HD+-R1K28B server

chassis. You should follow the procedures given in this chapter when installing,

removing or reconﬁguring SATA or peripheral drives and when replacing system

power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA........................................................................................................ 1-2

PCI Expansion Slots....................................................................................... 1-3

Ethernet Ports................................................................................................. 1-3

Onboard Controllers/Ports ..............................................................................1-3

Graphics Controller......................................................................................... 1-3

InﬁniBand ........................................................................................................ 1-3

Other Features................................................................................................1-3

1-3 Server Chassis Features ................................................................................1-4

System Power................................................................................................. 1-4

SATA Subsystem.............................................................................................1-4

Front Control Panel......................................................................................... 1-4

I/O Ports..........................................................................................................1-4

Cooling System...............................................................................................1-4

Air Shrouds .....................................................................................................1-5

Mounting Rails ................................................................................................1-5

1-4 Advanced Power Management.......................................................................1-5

Intel® Intelligent Power Node Manager (IPNM) .............................................1-5

Manageability Engine (ME).............................................................................1-5

1-4 Contacting Supermicro....................................................................................1-7

1-5 2U Twin: System Notes................................................................................... 1-8

Nodes.............................................................................................................. 1-8

System Power................................................................................................. 1-8

SATA Backplane/Drives................................................................................... 1-8

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL

vii

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ...................................................................................2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground .........................................................................................2-4

2-5 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Locking Tabs................................................................................................... 2-6

Releasing the Inner Rail ................................................................................. 2-6

Installing The Inner Rails on the Chassis....................................................... 2-7

Installing the Outer Rails on the Rack............................................................ 2-8

Standard Chassis Installation .........................................................................2-9

2-6 Checking the Serverboard Setup.................................................................. 2-10

2-7 Checking the Drive Bay Setup...................................................................... 2-12

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons..................................................................................... 3-2

Power..............................................................................................................3-2

UID..................................................................................................................3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

NIC..................................................................................................................3-2

Information LED.............................................................................................. 3-3

4-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Deﬁnition...........................................................................................4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................4-5

Power Disconnection Warning........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................4-13

Comply with Local and National Electrical Codes........................................4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Table of Contents

viii

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables................................................................................. 5-2

5-3 Rear I/O Ports.................................................................................................5-2

5-4 Processor and Heatsink Installation................................................................5-3

Installing a Passive CPU Heatsink .................................................................5-6

Removing the Heatsink................................................................................... 5-7

5-5 Installing Memory............................................................................................5-8

Memory Support.............................................................................................. 5-8

Maximum Memory........................................................................................... 5-9

5-6 Adding PCI Expansion Cards .......................................................................5-12

5-7 Serverboard Details ......................................................................................5-13

5-8 Connector Deﬁnitions.................................................................................... 5-16

5-9 Jumper Settings............................................................................................ 5-20

Explanation of Jumpers ................................................................................ 5-20

5-10 Onboard Indicators........................................................................................ 5-23

5-11 PCI-Express and Serial ATA Connections ....................................................5-25

5-12 Installing Software......................................................................................... 5-26

SuperDoctor 5...............................................................................................5-27

5-13 Serverboard Battery...................................................................................... 5-29

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Removing the Power Cord.............................................................................. 6-2

6-3 Control Panel ..................................................................................................6-2

6-4 Chassis Cover................................................................................................. 6-3

6-5 Air Shrouds .....................................................................................................6-4

6-6 Checking the Airﬂow .......................................................................................6-5

6-7 System Fans................................................................................................... 6-5

6-8 Removing and Installing the Backplane.......................................................... 6-7

Removing the Backplane................................................................................ 6-7

Installing the Backplane.................................................................................. 6-9

SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL

6-9 Installing the Serverboard............................................................................. 6-10

Compatible Motherboards.............................................................................6-10

Permanent and Optional Standoffs............................................................... 6-10

Installing an Daughter Card.......................................................................... 6-12

6-10 Adding an Expansion Card........................................................................... 6-13

6-11 Drive Bay Installation/Removal..................................................................... 6-14

Accessing the Drive Bays............................................................................. 6-14

6-12 Power Supply................................................................................................6-17

Power Supply Replacement.......................................................................... 6-17

Chapter 7 BIOS

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-1

Starting the Setup Utility................................................................................. 7-2

7-1 Main Setup...................................................................................................... 7-2

7-2 Advanced Setup Conﬁgurations......................................................................7-4

7-3 Event Logs.................................................................................................... 7-28

7-4 IPMI............................................................................................................... 7-30

7-5 Boot............................................................................................................... 7-32

7-6 Security.........................................................................................................7-34

7-7 Save & Exit................................................................................................... 7-35

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

Table of Contents

Notes

SUPERSERVER 2027PR-DTR/DTFR/DTTR USER'S MANUAL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 6039P-TXRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5025M-UR Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-NR32R Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028R-C1R(T)4+ Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-620P-ACR12H Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -2014S-TR Bedienungsanleitung

Supermicro

Supermicro SuperStorageServer 1029P-NES32R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E200-12A-4C Bedienungsanleitung

Supermicro

Supermicro SuperBlade IBS-001 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-DNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-FL Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9D Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem SSG-2028R-DN2R24L Bedienungsanleitung

Supermicro

Supermicro SuperStorage 2029P-DN2R24L Bedienungsanleitung

Supermicro

Supermicro SuperServer 2016Ti-HTRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 7049GP-TRT Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 740GP-TNRT Bedienungsanleitung

Supermicro

Supermicro 6027AX-TRF-HFT2 Bedienungsanleitung

Supermicro

Supermicro 5025M-4 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MA8-H12RFT Bedienungsanleitung

Supermicro

Supermicro A+ 2021TM-BTRF Bedienungsanleitung

Supermicro

Supermicro Supero SuperServer 5018A-MLTN4 Bedienungsanleitung

Supermicro

Supermicro A+ Server 2123BT-HTR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung