Supermicro MicroBlade MBE-628L-416 Bedienungsanleitung

MicroBlade™

User’s Manual

Revison 1.0c

Downloaded from Arrow.com.

MicroBlade User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license.Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FORANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a ClassA digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS

PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO

THE STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND

OTHER REPRODUCTIVE HARM.

MicroBlade User’s Manual

Release Date: October 20, 2016

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

Downloaded from Arrow.com.Downloaded from Arrow.com.

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of Supermicro's MicroBlade system. Installation and maintenance

should be performed by experienced professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the blade

system and describes the main features of the mainboard and enclosure. A quick start

procedure is also provided for your use.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing the MicroBlade.

Chapter 3: Setup and Installation

Refer here for details on installing the MicroBlade system into a rack.

Chapter 4: System Modules

This chapter covers modules in the MicroBlade system. It also covers the CMM module

and configuring double-wide bays.

Chapter 5: Power Supply Modules

This chapter covers the system power supplies and their installation.

Appendix A: System Specifications

This appendix provides a summary of system specifications.

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

MicroBlade User’s Manual

Notes

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview.............................................................................................1-1

1-2 Quick Start Setup..............................................................................1-1

1-3 Software Mode Selection.................................................................1-3

1-4 Product Checklist of Typical Components.....................................1-3

1-5 Blade Enclosure Features...............................................................1-4

Power......................................................................................................1-5

Middle Plane...........................................................................................1-5

LEDs.......................................................................................................1-6

Enclosure Cooling...................................................................................1-6

1-6 Power Supply Features....................................................................1-6

Power Supply Modules...........................................................................1-6

Power Cord..........................................................................................1-6

Power Supply Failure...........................................................................1-7

1-7 Special Design Features..................................................................1-7

Operating System Support......................................................................1-7

Remote Management .............................................................................1-7

Computing Density/Power ......................................................................1-7

High-Efficiency Power Supplies..............................................................1-8

1-8 Returning Merchandise for Service................................................1-8

1-9 Contacting Supermicro.....................................................................1-9

Chapter 2 Standardized Warning Statements.....................2-1

2-1 About Standardized Warning Statements .....................................2-1

Warning Definition...................................................................................2-1

Installation Instructions ...........................................................................2-3

Circuit Breaker........................................................................................2-4

Power Disconnection Warning................................................................2-5

Equipment Installation.............................................................................2-6

Restricted Area .......................................................................................2-7

Battery Handling .....................................................................................2-9

Redundant Power Supplies ..................................................................2-10

Backplane Voltage................................................................................2-11

Comply with Local and National Electrical Codes.................................2-12

Product Disposal...................................................................................2-13

Hot Swap Fan Warning.........................................................................2-14

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

MicroBlade User’s Manual

Power Cable and AC Adapter ..............................................................2-15

Chapter 3 Setup and Installation.................................................3-1

3-1 Overview.............................................................................................3-1

3-2 Unpacking the System .....................................................................3-1

Choosing a Setup Location.....................................................................3-1

Rack Precautions....................................................................................3-2

Server Precautions .................................................................................3-2

Rack Mounting Considerations...............................................................3-2

Ambient Operating Temperature..........................................................3-2

Reduced Airflow...................................................................................3-2

Mechanical Loading.............................................................................3-2

Circuit Overloading...............................................................................3-3

Reliable Ground...................................................................................3-3

Installing the System Into a Rack............................................................3-3

Rack Mounting Hardware .......................................................................3-3

Installation...............................................................................................3-4

Installing a Blade Unit into the Enclosure ...............................................3-7

Chapter 4 System Modules.............................................................4-1

4-1 Chassis Management Module.........................................................4-2

MBM-CMM-001 Module Installation........................................................4-3

Configuring the CMM..............................................................................4-5

CMM Functions.......................................................................................4-5

Remote KVM over IP ...........................................................................4-5

Remote Storage (Virtual Media)...........................................................4-6

Serial Over LAN (SOL).........................................................................4-6

Monitoring Functions............................................................................4-6

Power Consumption Management.......................................................4-6

CMM Buttons..........................................................................................4-7

Reset Button ........................................................................................4-7

Firmware.................................................................................................4-7

Web-based Management Utility..............................................................4-7

Supported Browsers.............................................................................4-8

Network Connection/Login...................................................................4-8

Address Defaults..................................................................................4-9

Summary Console Page......................................................................4-9

Chapter 5 Power Supply Modules..............................................5-1

5-1 Power Supply Modules.....................................................................5-1

Power Supply Failure..............................................................................5-4

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

vii

Installing a Power Supply........................................................................5-4

Removing a Power Supply......................................................................5-5

5-2 Redundant Power Supplies.............................................................5-7

5-3 Power Components..........................................................................5-8

Power Cord.............................................................................................5-8

Appendix A System Specifications ...........................................A-1

A-1 Enclosure Specifications .................................................................A-1

A-2 Environmental Specifications..........................................................A-6

A-3 Address Defaults...............................................................................A-6

A-4 Power Supply Power Information...................................................A-7

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

MicroBlade User’s Manual

viii

Notes

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

List of Figures

Figure 1-1. Installing a MicroBlade Module into the Chassis............................1-3

Figure 3-1. Positioning the Enclosure Template...............................................3-4

Figure 3-2. Securing the Rails to the Rack .......................................................3-4

Figure 3-3. Rack with Rails Installed.................................................................3-5

Figure 3-4. Attaching the Optional Handles......................................................3-6

Figure 3-5. Enclosure Installed into Rack .........................................................3-6

Figure 3-6. Inserting a MicroBlade Module into the Enclosure .........................3-8

Figure 4-1. Typical Blade System Module Configuration: Rear View ...............4-1

Figure 4-2. MBM-CMM-001 Chassis Management Module..............................4-2

Figure 4-3. Installing the CMM Module.............................................................4-4

Figure 4-4. Blade System Summary Page........................................................4-9

Figure 5-1. PWS-1K67P-1R Power Supply.......................................................5-2

Figure 5-2. PWS-2K01A-BR Power Supply......................................................5-3

Figure 5-3. Installing the Power Supply Module................................................5-4

Figure 5-4. Power Supply Module.....................................................................5-5

Figure A-1. MBE-628L Enclosure .....................................................................A-1

Figure A-2. MBE-628E Enclosure.....................................................................A-2

Figure A-3. MBE-314E Enclosure.....................................................................A-4

MicroBlade User’s Manual

Notes

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 6018TR-T Bedienungsanleitung

Supermicro

Supermicro AS-511E-WR Montageanleitung

Supermicro

Supermicro SuperServer SYS-1029U-TN12RV Bedienungsanleitung

Supermicro

Supermicro AS-4021M-82R+ Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-1124US-TNRP Bedienungsanleitung

Supermicro

Supermicro SuperServer 5029P-WTR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-521E-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer E102-9W-C Bedienungsanleitung

Supermicro

Supermicro SBI-6129P-C3N Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2029U-TN24R4T Bedienungsanleitung

Supermicro

Supermicro SuperServer 2016Ti-HTRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029GQ-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 6013P-8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028R-WC1R Bedienungsanleitung

Supermicro

Supermicro SuperServer 610C-TR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5019S-MT Bedienungsanleitung

Supermicro

Supermicro SuperServer 110T-M Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-640SP-DE1CR90 Bedienungsanleitung

Supermicro

Supermicro SYS-1028UX-LL1-B8 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211TP-HPTR Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-136R-4MU32JBF Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-743A-N4 Bedienungsanleitung

Supermicro

Supermicro 34140315 Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-8CN10P Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung