Supermicro SuperServer 5038MR-H8TRF Bedienungsanleitung

USER’S MANUAL

Revision 1.0a

SUPERSERVER®

5038MR-H8TRF

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0a

Release Date: June 05, 2017

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About this Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer. Installation and

maintainance should be performed by experienced technicians only.

             

supported memory, processors and operating systems (http://www.supermicro.

com).

Notes

For your system to work properly, please follow the links below to download all

necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info:

http://www.supermicro.com/about/policies/safety_information.cfm

If you have any questions, please contact our support team at:

[email protected]

This manual may be periodically updated without notice. Please check the

Supermicro Web site for possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates high voltage may be encountered when performing

a procedure.

Warning! Indicates important information given to prevent equipment/

property damage or personal injury.

SUPERSERVER 5038MR-H8TRF User's Manual

Contents

Chapter 1 Introduction..............................................................................1-1

1-1 Overview ........................................................................................................ 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ..................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Input/Output Ports........................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-4

System Power................................................................................................. 1-4

Hard Drives ..................................................................................................... 1-4

PCI Expansion Slots ....................................................................................... 1-4

User Interface.................................................................................................. 1-4

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Unpacking the System .................................................................................... 2-1

2-2 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-3 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

 ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................. 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Releasing the Inner Rail ................................................................................. 2-5

Installing the Inner Rails on the Chassis ........................................................ 2-6

Installing the Outer Rails onto the Rack......................................................... 2-7

Sliding the Chassis onto the Rack Rails......................................................... 2-8

Chapter 3 System Interface......................................................................3-1

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

Power .............................................................................................................. 3-2

Reset .............................................................................................................. 3-2

Preface

3-3 Control Panel LEDs ........................................................................................ 3-3

Power Fail ....................................................................................................... 3-3

Node Status LEDs .......................................................................................... 3-3

3-4 Hard Drive Carrier LEDs................................................................................. 3-4

3-5 Node Controls ................................................................................................. 3-5

Power Button and LED ................................................................................... 3-5

UID Button and LED ....................................................................................... 3-5

Failure LED ..................................................................................................... 3-5

3-6 Power Supply LEDs ........................................................................................ 3-6

Chapter 4 Standardized Warning Statements for AC Systems

About Standardized Warning Statements....................................................... 4-1

........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies (if applicable to your system)........................... 4-12

Backplane Voltage (if applicable to your system)......................................... 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning (if applicable to your system) ................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Installing the Processor and Heatsink ............................................................ 5-2

Installing an LGA 2011 Processor................................................................... 5-2

Installing a CPU Heatsink ............................................................................... 5-5

Removing the Heatsink .................................................................................. 5-5

5-3 Input/Output Ports........................................................................................... 5-6

5-4 Installing Memory............................................................................................ 5-7

Memory Support.............................................................................................. 5-7

Memory Population Guidelines ....................................................................... 5-7

5-5 Serverboard Details ........................................................................................ 5-9

 .....................................................................................5-11

Power Connectors ........................................................................................5-11

SUPERSERVER 5038MR-H8TRF User's Manual

Rear Input/Output Panel ................................................................................5-11

Other Connectors.......................................................................................... 5-12

5-7 Jumper Settings ............................................................................................ 5-15

5-8 Onboard Indicators........................................................................................ 5-18

5-9 SATA Ports .................................................................................................... 5-19

5-10 Installing Software......................................................................................... 5-20

SuperDoctor®5 ............................................................................................. 5-21

5-11 Onboard Battery............................................................................................ 5-22

Chapter 6 Advanced Chassis Setup........................................................6-1

6-1 Overview ......................................................................................................... 6-1

6-2 Removing Power from the System ................................................................. 6-2

6-3 Removing the Chassis Cover ......................................................................... 6-3

6-4 Corresponding Nodes, Fans and Hard Drives................................................ 6-4

6-5 Removing Motherboard Nodes ....................................................................... 6-5

6-6 Installing Hard Drives...................................................................................... 6-6

6-7 Installing an Air Shroud................................................................................... 6-9

6-8 System Fans ................................................................................................. 6-10

6-9 Power Supply.................................................................................................6-11

Replacing a Power Supply Module................................................................6-11

6-10 Removing and Installing the Backplane ...................................................... 6-13

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

......................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

Starting the Setup Utility ................................................................................. 7-2

 ...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-26

7-5 IPMI Settings................................................................................................. 7-28

7-6 Security ......................................................................................................... 7-30

7-7 Boot............................................................................................................... 7-33

7-8 Save & Exit ................................................................................................... 7-35

Appendix A BIOS Error Beep Codes ..................................................... A-1

Appendix B UEFI BIOS Recovery........................................................... B-1

Appendix C System Specications ........................................................ C-1

Preface

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Web Site: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Web Site: www.supermicro.com.tw

SUPERSERVER 5038MR-H8TRF User's Manual

Notes

Chapter 1

Introduction

1-1 Overview

The SuperServer 5038MR-H8TRF is a high-density multi-node server comprised

of the SC938BH-R1620BP 3U server chassis and eight hot-pluggable computing



systems are listed at www.supermicro.com.

In addition to the above components, the server includes:

• SAS backplane supporting the HDDs (BPN-SAS-938H)

• Four 8-cm system cooling fans (FAN-0133L4)

• One rackmount rail kit (MCP-290-00057-0N)

Per node:

• Expansion card (AOC-CGP-I2-O-P)

• Heatsink (SNK-P0047PS+)

• One air shroud (MCP-310-93802-0B)

• Riser Card: (RSC-RR1U-E8-O-P)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Supermicro product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety info:

http://www.supermicro.com/about/policies/safety_information.cfm

For support, email [email protected].

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 5038MR-H8TRF User's Manual

1-2 Serverboard Features

Each computing node of the SuperServer 5038MR-H8TRF features the X10SRD-F,

a single processor motherboard based on the Intel PCH C612 chipset. Below are

the main features. Figure 1-1 displays a block diagram of the chipset.

Processors

The serverboard supports a single Intel Xeon E5-2600/E5-1600 v3 series processor

in LGA2011 sockets (Socket R3). Refer to the Supermicro web site for a complete

listing of supported processors (www.supermicro.com).

Memory

The serverboard has four memory sockets that can support up to 256 GB RDIMM

(Registered DIMMs) or LRDIMM. (Load-Reduced DIMMs). Memory must be ECC

DDR4, 2133/1866/1600 Hz.

Input/Output Ports

The rear I/O ports for each node include two Gb LAN ports, a dedicated IPMI LAN

port, two USB 2.0 ports (with KVM dongle), one COM port, and one VGA port.

SATA Controller

Each node has two SATA3 ports on the back panel, two SATA3 ports onboard and

two SATA2/SAS for add-on cards.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 5019D-FN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Supermicro

Supermicro SUPERO 6027TR-D71RF SUPERSERVER Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014L-T Bedienungsanleitung

Supermicro

Supermicro superserver 5019S-ML Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MS-H12NR Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-6119R-C3N Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-3015A-I Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9D-4CN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620U-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-FL Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1025TC-10G Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6012P-i Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-240P-TNRT Bedienungsanleitung

Supermicro

Supermicro SBI-7427R-SH Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-i Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 2027PR-DNCR Bedienungsanleitung

Supermicro

Supermicro SuperServer 220BT-DNTR Bedienungsanleitung

Supermicro

Supermicro GEM002 Bedienungsanleitung

Supermicro

Supermicro SuperServer 510P-M Bedienungsanleitung

Supermicro

Supermicro SuperServer 621H-TN12R Bedienungsanleitung

Supermicro

Supermicro AS-3014TS-i Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1015B-3 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6013P-8 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung