Supermicro SuperServer 2016Ti-HTRF Bedienungsanleitung

SUPER

USER’S MANUAL

Revision 1.0

2U Twin2TM

SuperServer 2016Ti-HTRF

Manual Revision 1.0

Release Date: November 17, 2010

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our Web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITHTHE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 2016Ti-HTRF.

Installation and maintenance should be performed by experienced technicians

only.

The SuperServer 2016Ti-HTRF is a 2U Twin2(two serverboards/nodes in a 2U

chassis) rackmount server based on the SC217HQ-R920B server chassis and four

Super X8SiT-HF serverboards.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X8SiT-HF serverboard

and the SC217HQ-R920B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 2016Ti-HTRF

into a rack and check out the server conﬁguration prior to powering up the system. If

your server was ordered without the processor and memory components, this chap-

ter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 2016Ti-HTRF.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8SiT-HF serverboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

iii

Preface

SUPERSERVER 2016Ti-HTRF User's Manual

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC217HQ-R920B 2U rackmount

server chassis. You should follow the procedures given in this chapter when install-

ing, removing or reconﬁguring SATAor peripheral drives and when replacing system

power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: POST Error Beep Codes

Appendix B: BIOS Recovery

Appendix C: System Speciﬁcations

Preface

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Motherboard Features.....................................................................................1-2

Processor........................................................................................................1-2

Memory ...........................................................................................................1-2

Onboard SATA.................................................................................................1-2

PCI Expansion Slots....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-2

1-3 Server Chassis Features ................................................................................1-4

System Power.................................................................................................1-4

SATA Subsystem.............................................................................................1-4

Control Panel .................................................................................................. 1-4

Rear I/O Panel................................................................................................ 1-4

Cooling System...............................................................................................1-4

1-4 2U Twin2: System Notes .................................................................................1-5

Nodes..............................................................................................................1-5

System Power................................................................................................. 1-5

SATA Backplane/Drives................................................................................... 1-5

1-5 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System....................................................................................2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

Removing the Protective Film.........................................................................2-4

2-4 Rack Mounting Instructions............................................................................. 2-5

Separating the Sections of the Rack Rails.....................................................2-5

Installing The Inner Rails on the Chassis.......................................................2-6

SUPERSERVER 2016Ti-HTRF User's Manual

vii

Table of Contents

Installing the Outer Rails on the Rack............................................................2-7

Standard Chassis Installation .........................................................................2-8

2-5 Checking the Serverboard Setup.................................................................... 2-9

2-6 Preparing to Power On................................................................................. 2-10

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

Power..............................................................................................................3-1

UID.................................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................3-2

Alert LED......................................................................................................... 3-2

NIC.................................................................................................................. 3-2

3-4 Drive Carrier LEDs..........................................................................................3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions..........................................................................4-1

4-2 General Safety Precautions............................................................................4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard ..............................................................................5-1

Precautions .....................................................................................................5-1

5-2 Motherboard Installation..................................................................................5-2

5-3 Connecting Cables..........................................................................................5-3

Connecting Data Cables.................................................................................5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 Rear I/O Ports................................................................................................. 5-4

5-5 Processor and Heatsink Installation................................................................5-5

Installing the LGA1156 Processor ................................................................. 5-5

Installing a Passive CPU Heatsink .................................................................5-7

5-6 Installing Memory............................................................................................ 5-9

DIMM Installation ............................................................................................ 5-9

Memory Support............................................................................................5-10

Memory Population Guidelines......................................................................5-11

5-7 Adding PCI Expansion Cards .......................................................................5-14

5-8 Motherboard Details......................................................................................5-14

X8SiT-HF Quick Reference........................................................................... 5-14

5-9 Connector Deﬁnitions ...................................................................................5-17

viii

5-10 Jumper Settings............................................................................................ 5-23

5-11 Onboard Indicators........................................................................................5-26

5-12 SATA Ports.................................................................................................... 5-27

5-13 Installing Software......................................................................................... 5-28

Supero Doctor III........................................................................................... 5-29

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

Unpacking .......................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-2

Fan Conﬁguration............................................................................................6-3

System Fan Failure.........................................................................................6-3

6-4 Hard Drive Installation/Removal......................................................................6-4

Overview .........................................................................................................6-4

Installing and Removing Hard Drives .............................................................6-4

6-5 Node Installation/Removal..............................................................................6-7

6-6 Installing the Air Shrouds................................................................................ 6-9

Air Shrouds ..................................................................................................... 6-9

6-7 Power Supply.................................................................................................. 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Security Settings........................................................................................... 7-20

7-5 Boot Settings ................................................................................................ 7-21

7-6 Exit Options................................................................................................... 7-22

Appendix A POST Error Beep Codes

Appendix B BIOS Recovery

Appendix C System Speciﬁcations

SUPERSERVER 2016Ti-HTRF User's Manual

Chapter 1

Introduction

1-1 Overview

The Supermicro SuperServer 2016Ti-HTRF is "2U Twin2" server composed of the

SC217HQ-R920B chassis and four X8SiT-HF motherboards. Please refer to our

web site for information on operating systems that have been certiﬁed for use with

the 2016Ti-HTRF.

In addition to the mainboard and chassis, various hardware components may have

been included with the 2016Ti-HTRF, as listed below.

Four passive CPU heatsinks (SNK-P0046P)

•

Four riser cards for PCI-E x16 add-on cards (RSC-R1U-E16R)•

Four 8-cm PWM fans (FAN-0111L4)•

SATA Accessories:•

Twelve 2.5" hard drive carriers (MCP-220-00075-0B)

One SATA backplane (BPN-SAS-827HQ)

Four SATA cables (CBL-0317L)

One CD containing drivers and utilities

•

SuperServer 2016Ti-HTRF User's Manual•

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 2016Ti-HTRF User's Manual

1-2 Motherboard Features

At the heart of the SuperServer 2016Ti-HTRF are four X8SiT-HF single processor

motherboards based upon Intel's 3420 chipset. Below are the main features of

the X8SiT-HF. Note that the features on each board are quadrupled for the server,

which includes four nodes.

Processor

Each X8SiT-HF supports single Intel®Xeon®3400 and L3400 Series, CoreTM i3 and

Pentium®G6950 processors (LGA1156 socket). Please refer to our web site for a

complete listing of supported processors (www.supermicro.com).

Memory

The X8SiT-HF has six DIMM slots that can support up to 16 GB of UDIMM or up

to 32GB of RDIMM DDR3-1333/1066/800 MHz ECC memory only.

Onboard SATA

A SATA controller is built into the chipset to provide support for a six port, 3 Gb/sec

Serial ATA subsystem, which is RAID 0, 1, 5 (Windows only) and 10 compatible.

PCI Expansion Slots

The X8SiT-HF has one PCI-Express 2.0 x16 slot. Riser cards are included for

use.

Onboard Controllers/Ports

An onboard IDE controller supports two IDE devices. Onboard I/O backpanel ports

include one COM port, a VGA port, PS/2 mouse and keyboard ports, two Gb LAN

ports, a dedicated IPMI LAN port and two USB ports. Extra USB ports are included

on the motherboard.

Other Features

Other onboard features that promote system health include voltage monitors, a

chassis intrusion header, auto-switching voltage regulators, chassis and CPU

overheat sensors and BIOS rescue.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 4027GR-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-6029U-T Series Bedienungsanleitung

Supermicro

Supermicro AS-1115HS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MS-H8TRF Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 2027PR-DC1R Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-TN12RV-NEBS Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019D-4C-FN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer E50-9AP Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-210GT-HNTF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6027R-72RF Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-i Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9D-4C-FN13TP Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019C-FHTN8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-640SP-DE2CR90 Bedienungsanleitung

Supermicro

Supermicro Storage SuperServer SSG-640SP-E1CR90 Bedienungsanleitung

Supermicro

Supermicro 1012A-MTF Bedienungsanleitung

Supermicro

Supermicro SuperServer 1019D-FRN8TP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014P-32 Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1015SV-WTNRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-FL Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6021F Bedienungsanleitung

Supermicro

Supermicro AS-4021M-82R+ Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5014C-MF 5014C-MF Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung