Supermicro 1012A-MTF Bedienungsanleitung

A+ Server 1012A-MTF

SUPER ®

USER’S MANUAL

1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0a

Release Date: January 16, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the A+ Server 1012A-MTF. In-

stallation and maintenance should be performed by experienced technicians only.

The A+ Server 1012A-MTF is a high-end server based on the CSE-813MT-350CB

1U rackmount chassis and the MB-H8SML-iF single processor serverboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the MB-H8SML-iF serverboard

and the CSE-813MT-350CB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the A+ Server 1012A-MTF into

a rack and check out the server conguration prior to powering up the system. If

your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

A+ Server 1012A-MTF User's Manual

Chapter 4: Warning Statements for AC Systems

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the A+

Server 1012A-MTF.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the MB-H8SML-iF serverboard, includ-

ing the locations and functions of connections, headers and jumpers. Refer to this

chapter when adding or removing processors or main memory and when recong-

uring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the CSE-813MT-350CB server chas-

sis. You should follow the procedures given in this chapter when installing, removing

or reconguring SATA or peripheral drives and when replacing system power supply

modules and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: POST Error Beep Codes

Appendix B: UEFI BIOS Recovery Instructions

Appendix C: System Specications

Preface

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA (SATA)............................................................................................ 1-2

I/O Ports.......................................................................................................... 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

SATA Subsystem............................................................................................. 1-3

Control Panel .................................................................................................. 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Rear Inner Rails ........................................................................ 2-4

Installing the Rack Rails ................................................................................. 2-5

Installing the Server into the Rack.................................................................. 2-6

Installing the Server into a Telco Rack ........................................................... 2-7

A+ Server 1012A-MTF User's Manual

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheating..................................................................................................... 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-4

3-5 Power Supply LEDs ........................................................................................ 3-4

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Processor and Heatsink Installation................................................................ 5-2

5-3 Mounting the Motherboard into a Chassis...................................................... 5-4

5-4 Installing Memory............................................................................................ 5-4

DIMM Module Population Conguration .................................................... 5-6

5-5 PCI Expansion Cards...................................................................................... 5-7

5-6 I/O Port and Control Panel Connections ........................................................ 5-8

Front Control Panel......................................................................................... 5-8

5-7 Motherboard Details........................................................................................ 5-9

5-8 Connector Denitions ....................................................................................5-11

5-9 Jumper Settings ............................................................................................ 5-18

Explanation of Jumpers ................................................................................ 5-18

5-10 Onboard Indicators........................................................................................ 5-21

5-11 SATA Drive Connections ............................................................................... 5-22

Preface

vii

viii

5-12 Enabling SATA RAID..................................................................................... 5-23

Serial ATA (SATA).......................................................................................... 5-23

Installing the OS/SATA Driver ....................................................................... 5-23

Building a Driver Diskette......................................................................... 5-23

Enabling SATA RAID in the BIOS................................................................. 5-24

Using the Adaptec RAID Utility ..................................................................... 5-25

Installing the RAID Driver During OS Installation......................................... 5-25

5-13 Installing Software......................................................................................... 5-26

SuperDoctor III.............................................................................................. 5-27

5-14 Onboard Battery............................................................................................ 5-28

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Removing the Chassis Cover ......................................................................... 6-3

6-4 System Fans ................................................................................................... 6-4

6-5 Drive Bay Installation/Removal ....................................................................... 6-4

Removing the Front Bezel .............................................................................. 6-4

Accessing the Drive Bays ............................................................................... 6-5

Hard Drive Installation..................................................................................... 6-5

6-6 Power Supply.................................................................................................. 6-8

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Menu ...................................................................................................... 7-2

7-3 Advanced Settings Menu ................................................................................ 7-3

7-4 Security Menu ............................................................................................... 7-16

7-5 Boot Menu..................................................................................................... 7-16

7-6 Exit Menu ...................................................................................................... 7-18

Appendix A POST Error Beep Codes

Appendix B UEFI BIOS Recovery Instructions

Appendix C System Specications

A+ Server 1012A-MTF User's Manual

viii

Notes

Chapter 1

Introduction

1-1 Overview

The A+ Server 1012A-MTF is a high-end server comprised of the SC813MT-350CB

1U chassis and the H8SML-iF single processor motherboard. Refer to our web

site for information on operating systems that have been certied for use with the

system (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components have

been included with the 1012A-MTF, as listed below:

•Three sets of 4-cm counter-rotating fans (FAN-0065L4)

•One passive CPU heatsink (SNK-P0026)

•One air shroud for 1U system (MCP-310-81303-0B)

•One riser card for one PCI-E 2.0 x8 add-on card (CSE-RR1U-E8)

•SATA Accessories

One SATA backplane (BPN-SAS-815TQ)

Four 3.5" hard drive carriers (MCP-220-00075-0B)

One SATA cable (CBL-0186L)

•One rackmount kit (MCP-290-00102-0N and MCP-290-00107-ON)

•A+ Server 1012A-MTF Quick Reference Guide

Note: For your system to work properley, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

•Product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety information:

http://super-dev/about/policies/safety_information.cfm

For support, email [email protected].

Chapter 1: Introduction

1-1

1-2

A+ Server 1012A-MTF User's Manual

1-2 Motherboard Features

The H8SML-iF serverboard is based on the AMD SR5650 and SP5100 chipsets.

Below are the main features of the H8SML-iF (see Figure 1-1 for a block diagram

of the chipset).

Processors

The H8SML-iF supports one AMD Opteron 3000 series (AMD Socket AM3+ type)

processor. Please refer to the motherboard description pages on our web site for

a complete listing of supported processors.

Memory

The H8SML-iF serverboard contains four (4) single/dual channel DIMM slots sup-

porting up to 32 GB of Unbuffered ECC/non-ECC DDR3-1600/1333/1066 Mhz

speed, 1 GB, 2 GB, 4 GB or 8 GB size SDRAM memory. Please refer to Chapter

5 for installing memory.

Serial ATA (SATA)

Serial ATA (SATA) is a physical storage interface that employs a single cable with a

minimum of four wires to create a point-to-point connection between devices. This

connection is a serial link that supports a SATA transfer rate from 150 MBps. The

serial cables used in SATA are thinner than the traditional cables used in Parallel

ATA (PATA) and can extend up to one meter in length, compared to only 40 cm for

PATA cables. Overall, SATA provides better functionality than PATA.

I/O Ports

The color-coded I/O ports include one COM port, a VGA (monitor) port, two USB 2.0

ports, PS/2 mouse and keyboard ports and two gigabit Ethernet ports. A dedicated

IPMI LAN port is also included.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-E403-12P-FN2T Bedienungsanleitung

Supermicro

Supermicro SuperServer 4029GP-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-121H-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028R-TDWNR Bedienungsanleitung

Supermicro

Supermicro SBI-7428R-C3 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MC-H8TRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018R-M Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1015CS-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6021H Bedienungsanleitung

Supermicro

Supermicro 5015M-Ni Montage- und Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 2027PR-DTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 8049U-E1CR4T Bedienungsanleitung

Supermicro

Supermicro AS-1114CS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-611C-TN4R Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -2115GT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 7049P-TRT Bedienungsanleitung

Supermicro

Supermicro SuperServer 5029C-TN2 Bedienungsanleitung

Supermicro

Supermicro SuperServer E102-9W-H Bedienungsanleitung

Supermicro

Supermicro SuperServer 5013C-M8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6023L-8R Bedienungsanleitung

Supermicro

Supermicro FatTwin AS -F1114S-FT Bedienungsanleitung

Supermicro

Supermicro SuperServer series Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-440P-TNRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1025C-UR Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung