Supermicro SUPERSERVER 6027R-72RF Bedienungsanleitung

SUPERSERVER

6027R-72RF

6027R-72RFT

SUPER

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: June 19, 2012

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer 6027R-

72RF/6027R-72RFT. Installation and maintainance should be performed by expe-

rienced technicians only.

The SuperServer 6027R-72RF/6027R-72RFT is a high-end server based on the

SC825TQ-R740LPB 2U chassis and the X9DRH-7F/X9DRH-7TF dual processor

serverboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X9DRH-7F/X9DRH-7TF

serverboard and the SC825TQ-R740LPB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 6027R-

72RF/6027R-72RFT into a rack and check out the server conguration prior to

powering up the system. If your server was ordered without processor and memory

components, this chapter will refer you to the appropriate sections of the manual

for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6027R-72RF/6027R-72RFT.

SUPERSERVER 6027R-72RF/6027R-72RFT User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X9DRH-7F/X9DRH-7TF serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC825TQ-R740LPB server chas-

sis. You should follow the procedures given in this chapter when installing, removing

or reconguring SAS/SATA or peripheral drives and when replacing system power

supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SAS ................................................................................................................ 1-2

SATA .............................................................................................................. 1-2

PCI Expansion Slots ....................................................................................... 1-2

I/O Ports .......................................................................................................... 1-2

Graphics Controller ......................................................................................... 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power ................................................................................................. 1-3

Hard Drive Subsystem .................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System ............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Separating the Sections of the Rack Rails..................................................... 2-4

Installing the Inner Rail Extension .................................................................. 2-4

Outer Rack Rails............................................................................................. 2-6

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

SUPERSERVER 6027R-72RF/6027R-72RFT User's Manual

vii

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Power Fail ....................................................................................................... 3-2

Information LED .............................................................................................. 3-2

NIC1 ................................................................................................................ 3-2

NIC2 ................................................................................................................ 3-2

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

3-4 Drive Carrier LEDs.......................................................................................... 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-2

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 I/O Ports .......................................................................................................... 5-3

5-4 Installing the Processor and Heatsink ............................................................ 5-4

Installing an LGA2011 Processor.................................................................... 5-4

Installing a CPU Heatsink ............................................................................... 5-7

Removing the Heatsink................................................................................... 5-7

5-5 Installing Memory ............................................................................................ 5-8

Memory Support.............................................................................................. 5-8

DIMM Installation ............................................................................................ 5-8

5-6 Adding PCI Add-On Cards.............................................................................5-11

5-7 Serverboard Details ...................................................................................... 5-12

X9DRH-7F/X9DRH-7TF Quick Reference .................................................... 5-13

5-8 Connector Denitions ................................................................................... 5-15

5-9 Jumper Settings ............................................................................................ 5-21

5-10 Onboard Indicators........................................................................................ 5-23

5-11 SAS and SATA Ports..................................................................................... 5-24

Table of Contents

viii

5-12 Installing Software......................................................................................... 5-25

Supero Doctor III........................................................................................... 5-26

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Fans .................................................................................. 6-3

6-4 Drive Bay Installation/Removal ....................................................................... 6-4

Accessing the Drive Bays ............................................................................... 6-4

SAS/SATA Drive Installation............................................................................ 6-5

Hard Drive Backplane ..................................................................................... 6-6

DVD-ROM Installation (Optional).................................................................... 6-6

6-5 Power Supply .................................................................................................. 6-7

Power Supply Failure...................................................................................... 6-7

Removing/Replacing the Power Supply.......................................................... 6-7

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 4-1

Starting BIOS Setup Utility.............................................................................. 4-1

How To Change the Conguration Data ......................................................... 4-2

Starting the Setup Utility ................................................................................. 4-2

7-2 Main Setup ...................................................................................................... 4-2

7-3 Advanced Setup Congurations...................................................................... 4-4

7-4 Event Logs .................................................................................................... 4-25

7-5 IPMI............................................................................................................... 4-27

7-6 Boot............................................................................................................... 4-29

7-7 Security ......................................................................................................... 4-30

7-8 Save & Exit ................................................................................................... 4-31

Appendix A BIOS Error Beep Codes

Appendix B System Specications

SUPERSERVER 6027R-72RF/6027R-72RFT User's Manual

Chapter 1

Introduction

1-1 Overview

The SuperServer 6027R-72RF/6027R-72RFT is a high-end server comprised of two

main subsystems: the SC825TQ-R740LPB 2U server chassis and the X9DRH-7F/

X9DRH-7TF dual processor serverboard. Please refer to our web site for informa-

tion on operating systems that have been certied for use with the system (www.

supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 6027R-72RF/6027R-72RFT, as listed below:

•Two passive CPU heatsinks (SNK-P0048PS)

•Three 8-cm system fans (FAN-0126L4)

•One air shroud (MCP-310-29001-0N)

•SAS/SATA Accessories

One SAS/SATA backplane (BPN-SAS-825TQ)

Two 27-cm. iPass to SATA cables (CBL-0176L-02)

Eight drive carriers (MCP-220-00092-0B)

•One CD containing drivers and utilities

•SuperServer 6027R-72RF/6027R-72RFT User's Manual

Optional

•One rackmount kit (CSE-PT26)

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 6027R-72RF/6027R-72RFT User's Manual

1-2 Serverboard Features

The SuperServer 6027R-72RF/6027R-72RFT is built around the X9DRH-7F/

X9DRH-7TF, a dual processor serverboard based on the Intel C602 chipset and

designed to provide maximum performance. Below are the main features of the

X9DRH-7F/X9DRH-7TF. (See Figure 1-1 for a block diagram of the chipset).

Processors

The X9DRH-7F/X9DRH-7TF supports single or dual Intel® E5-2600 Series (Socket

R) processors in LGA 2011 sockets. Please refer to our web site for a complete

listing of supported processors (www.supermicro.com).

Memory

The X9DRH-7F/X9DRH-7TF has sixteen DIMM slots that can support up to 512

GB of ECC registered/unbuffered DDR3-1600/1066/800 memory. Please refer to

Chapter 5 for details on installing memory.

SAS

An LSI 2208 hardware RAID controller provides support for eight SAS 2.0 ports,

which are RAID 0, 1, 5, 6, 10, 50 and 60 capable.

SATA

A SATA controller is integrated into the C602 chipset to provide a 6+4 port SATA

subsystem, which is RAID 0, 1, 10 and 5 capable. Two ports support SATA 3.0 (I-

SATA0/1) and 6+2 support SATA 2.0 (I-SATA2-5).

PCI Expansion Slots

The X9DRH-7F/X9DRH-7TF has six PCI-E 3.0 x8 (in x16 slots), two PCI-E 3.0 x8

and one PCI-E 3.0 x16 slots. Note that the PCI slots are controlled by the CPU so

some slots may not be available when two CPUs are not installed on the board at

the same time. See the serverboard layout in Chapter 5 for details.

I/O Ports

The color-coded I/O ports include one COM port, a VGA (monitor) port, four USB,

two Ethernet LAN ports (10 Gb ports on the 6027R-72RFT and 1 Gb ports on the

6027R-72RF) and a dedicated IPMI LAN port.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro ASG-1115S-NE316R Bedienungsanleitung

Supermicro

Supermicro MicroBlade Bedienungsanleitung

Supermicro

Supermicro SuperStorage 2029P-E1CR48H Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6023L-8R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6038R-TXR Bedienungsanleitung

Supermicro

Supermicro SCF424 Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029P-C1RT Bedienungsanleitung

Supermicro

Supermicro Supero A+ SERVER 1042G-TF Bedienungsanleitung

Supermicro

Supermicro Superserver Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2029GP-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-741GE-TNRT Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-E301-9D-8CN4 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221BT-HNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-8+ Bedienungsanleitung

Supermicro

Supermicro SuperServer 6029TR-DTR Bedienungsanleitung

Supermicro

Supermicro AS-1010P-8R Bedienungsanleitung

Supermicro

Supermicro E100-9APP Bedienungsanleitung

Supermicro

Supermicro 6027TR-H70QRF Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-7125W-S6 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6023L-8R Bedienungsanleitung

Supermicro

Supermicro 5025M-4 Bedienungsanleitung

Supermicro

Supermicro SUPERO SUPERSERVER 1028R-WTR Series Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-620P-ACR12H Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung