Supermicro SUPERSERVER 2026T-DE2R24L Bedienungsanleitung

SUPERSERVER

2026T-DE2R24L

SUPER

USER’S MANUAL

1.0a

Manual Revision 1.0a

Release Date: December 17, 2012

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our Web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITHTHE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It pro-

vides information for the installation and use of the SuperServer 2026T-DE2R24L.

Installation and maintainance should be performed by experienced technicians only.

The SuperServer 2026T-DE2R24L is a high-end storage server solution based on

the SC927 2U rackmount chassis and the X8DTS dual processor serverboard.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X8DTS serverboard and the

SC927TQ-R1200BP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 2026T-

DE2R24Linto a rack and check out the server conﬁguration prior to powering up the

system. If your server was ordered without processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panels on the chassis as well the HDD carrier

LEDs.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 2026T-DE2R24L.

SUPERSERVER 2026T-DE2R24L User's Manual

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X8DTS serverboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC927 server chassis. You should

follow the procedures given in this chapter when installing, removing or reconﬁgur-

ing SAS/SATA or peripheral drives and when replacing system power supply units

and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁcations

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SAS ................................................................................................................1-2

SATA ..............................................................................................................1-2

PCI Expansion Slots....................................................................................... 1-2

Rear Chassis Ports......................................................................................... 1-3

Graphics Controller......................................................................................... 1-3

Other Features................................................................................................1-3

1-3 Server Chassis Features ................................................................................1-3

System Power.................................................................................................1-3

SAS/SATA Subsystem..................................................................................... 1-3

Front Control Panel.........................................................................................1-3

Cooling System...............................................................................................1-4

1-4 Contacting Supermicro....................................................................................1-5

1-5 SBB: Storage Bridge Bay ............................................................................... 1-6

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions............................................................................................2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ...................................................................................2-3

Circuit Overloading.....................................................................................2-3

Reliable Ground .........................................................................................2-3

2-4 Installing the System into a Rack ...................................................................2-4

Installing the Inner Rack Rails........................................................................ 2-4

Installing the Outer Rack Rails....................................................................... 2-5

Installing the Chassis into a Rack...................................................................2-6

SUPERSERVER 2026T-DE2R24L User's Manual

vii

2-5 Checking the Serverboard Setup.................................................................... 2-7

2-6 Checking the Drive Bay Setup........................................................................ 2-9

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Button.......................................................................................3-1

Power..............................................................................................................3-1

3-3 Control Panel LEDs ........................................................................................ 3-1

Power Fail.......................................................................................................3-1

Overheat/Fan Fail: ..........................................................................................3-2

NIC1................................................................................................................3-2

NIC2................................................................................................................3-2

Heartbeat......................................................................................................... 3-2

Power..............................................................................................................3-3

3-4 Drive Carrier LEDs..........................................................................................3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Deﬁnition...........................................................................................4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................4-5

Power Disconnection Warning........................................................................ 4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................4-13

Comply with Local and National Electrical Codes........................................4-14

Product Disposal...........................................................................................4-15

Hot Swap Fan Warning.................................................................................4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-2

5-2 Cable and Device Connectiions...................................................................... 5-2

Power Connections.................................................................................... 5-2

Fan Cabling................................................................................................5-2

Control Panels............................................................................................5-2

SSB Connections....................................................................................... 5-2

Table of Contents

viii

5-3 Installing the Processor and Heatsink ............................................................5-3

Installing an LGA1366 Processor ...................................................................5-3

Installing the Heatsink.....................................................................................5-5

Removing the Heatsink................................................................................... 5-5

5-4 Installing Memory............................................................................................5-6

Memory Support.............................................................................................. 5-6

DIMM Installation ............................................................................................5-6

5-5 Installing PCI Add-On Cards...........................................................................5-8

5-6 Serverboard Details ......................................................................................5-10

X8DTS Quick Reference................................................................................5-11

5-7 Connector Deﬁnitions ...................................................................................5-12

5-8 Jumper Settings............................................................................................ 5-14

5-9 Onboard Indicators........................................................................................ 5-16

5-10 Installing Software.........................................................................................5-17

SuperDoctor III..............................................................................................5-18

5-11 Onboard Battery............................................................................................5-20

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel ..................................................................................................6-2

6-3 System Fans................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Fans.................................................................................. 6-3

6-4 Drive Bay Installation/Removal....................................................................... 6-5

Accessing the Drive Bays............................................................................... 6-5

Hard Drive Midplane....................................................................................... 6-5

SAS 2.0 Controller.......................................................................................... 6-5

SAS/SATA Drive Installation............................................................................ 6-5

6-5 Midplane..........................................................................................................6-8

6-6 Power Supply..................................................................................................6-9

Power Supply Failure...................................................................................... 6-9

Replacing the Power Supply........................................................................... 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting the BIOS Setup Utility ....................................................................... 7-1

How To Change the Conﬁguration Data......................................................... 7-1

Starting the Setup Utility................................................................................. 7-2

SUPERSERVER 2026T-DE2R24L User's Manual

Table of Contents

7-2 Main Setup......................................................................................................7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-4

7-4 Security Settings........................................................................................... 7-24

7-5 Boot Conﬁguration ........................................................................................ 7-25

7-6 Exit Options...................................................................................................7-26

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The SuperServer 2026T-DE2R24L is a high-end Super Storage Bridge Bay (SBB)

system comprised of two main subsystems: the SC927 chassis and two X8DTS dual

processor serverboards. Please refer to our web site for information on operating

systems that have been certiﬁed for use with the system (www.supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the 2026T-DE2R24L, as listed below:

• Four passive CPU heatsinks (SNK-P0037P)

• Six 4-cm fans (FAN-0088L4)

• Two KVM cables (CBL-0218L)

• SAS/SATA Accessories

One SAS backplane (BPN-SAS-927)

Twenty four 2.5 inch hard drive carriers (MCP-220-97301-0B)

• Two riser cards for PCI-E expansion cards (RSC-R2UT-2E4E8R-SS026)

• Two SAS controller mezzanine cards (AOM-SAS2-L8)

• One set of rackmount hardware (MCP-290-00057-0N)

• One CD containing drivers and utilities (CDR-X8)

• SuperServer 2026T-DE2R24L User's Manual

Note: a complete list of safety warnings is provided on the Supermicro web site at

http://www.supermicro.com/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SUPERSERVER 6021F Bedienungsanleitung

Supermicro

Supermicro SuperServer 6023P-i Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1015CS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6013P-T Bedienungsanleitung

Supermicro

Supermicro 1012A-MTF Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039MA8-H12RFT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211SE-31A Bedienungsanleitung

Supermicro

Supermicro SUPERO SuperServer 1018L-MP Bedienungsanleitung

Supermicro

Supermicro Supero SuperServer 5018A-MLTN4 Bedienungsanleitung

Supermicro

Supermicro SYS-521C-NR Bedienungsanleitung

Supermicro

Supermicro SSG-6049P-E1CR24H Bedienungsanleitung

Supermicro

Supermicro 8060 Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-213A-N8 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-421GE-TNRT Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem SSG-2028R-DN2R40L Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9D-16C-IP Bedienungsanleitung

Supermicro

Supermicro SuperServer 220HE-FTNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6018R-TD Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018A-TN7B Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E200-12D-10C Bedienungsanleitung

Supermicro

Supermicro 4048B-TR4FT Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9P-FN2T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1025TC-10G Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung