Supermicro 6018R-WTR Bedienungsanleitung

SUPER ®

USER'S MANUAL

Revision 1.0

SUPERSERVER

6018R-WTR

6018R-WTRT

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITHTHE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0

Release Date: August 14, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 6018R-WTR(T).

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 6018R-WTR(T) is a 1U rackmount server based on the

SC815TQ-R706WB server chassis and the X10DRW-i(T) serverboard. The

SuperServer 6018R-WTR(T) system's WIO platform has major advantages over

E-ATX/ATX platforms in small form factor 1U and 2U systems by increasing I/O

performance by use of multiple full-height, full-length add-on cards. Please refer to

our web site for updates on supported processors.

The only difference between the 6018R-WTR and 6018R-WTRT servers is that

the 6018R-WTR use 1Gps dual LAN ports and the 6018R-WTRT uses 10Gps dual

LAN ports.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10DRW-i(T) serverboard

and the SC815TQ-R706WB chassis.

Chapter 2: Server Installation

Thischapterdescribesthe stepsnecessarytoinstalltheSuperServer6018R-WTR(T)

into a rack and check out the server conﬁguration prior to powering up the system.

If your server was ordered without the processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements for AC Systems

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6018R-WTR(T).

iii

Preface

SUPERSERVER 6018R-WTR(T) USER'S MANUAL

Chapter 5: Advanced Serverboard Setup

This chapter provides detailed information on the X10DRW-i(T) serverboard,

including the locations and functions of connectors, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁguring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC815TQ-R706WB chassis.

You should follow the procedures given in this chapter when installing, removing

or reconﬁguring Serial ATA or peripheral drives and when replacing system power

supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS POST Error Codes

Appendix B: Installing Windows

Appendix C: System Speciﬁcations

Preface

Notes

SUPERSERVER 6018R-WTR(T) USER'S MANUAL

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

SAS/SATA........................................................................................................1-2

PCI Expansion Slots....................................................................................... 1-3

Rear I/O Ports.................................................................................................1-3

1-3 Server Chassis Features ................................................................................1-3

System Power................................................................................................. 1-3

Hard Drive Subsystem.................................................................................... 1-3

PCI Expansion Slots....................................................................................... 1-3

Front Control Panel.........................................................................................1-4

I/O Backplane.................................................................................................. 1-4

Cooling System............................................................................................... 1-4

1-4 Advanced Power Management.......................................................................1-4

Intel® Intelligent Power Node Manager (NM).................................................1-4

Manageability Engine (ME)............................................................................. 1-4

1-5 Contacting Supermicro....................................................................................1-6

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup.........................................................................................2-1

Choosing a Setup Location............................................................................. 2-2

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-4

Reliable Ground ......................................................................................... 2-4

2-5 Installing the System into a Rack ...................................................................2-5

Identifying the Sections of the Rack Rails......................................................2-5

Installing the Inner Rails ................................................................................. 2-5

vii

Table of Contents

Installing the Outer Rails.................................................................................2-6

Installing the Server into the Rack.................................................................. 2-7

2-6 Checking the Serverboard Setup.................................................................... 2-8

2-7 Checking the Drive Bay Setup........................................................................ 2-9

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-2

Reset...............................................................................................................3-2

Power.............................................................................................................. 3-2

UID.................................................................................................................. 3-2

3-3 Control Panel LEDs ........................................................................................3-3

Information LED.............................................................................................. 3-3

NIC2................................................................................................................ 3-3

NIC1................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power.............................................................................................................. 3-4

3-4 Hard Drive Carrier LEDs................................................................................. 3-4

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements.......................................................4-1

Warning Deﬁnition...........................................................................................4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning........................................................................4-6

Equipment Installation.....................................................................................4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies ..........................................................................4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................4-14

Product Disposal........................................................................................... 4-15

Easy Swap Fan Warning ..............................................................................4-16

Power Cable and AC Adapter ......................................................................4-18

viii

SUPERSERVER 6018R-WTR(T) USER'S MANUAL

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-1

5-2 Connecting Cables..........................................................................................5-2

Connecting Data Cables................................................................................. 5-2

Connecting Power Cables ..............................................................................5-2

Connecting the Control Panel......................................................................... 5-3

5-3 Rear I/O Ports.................................................................................................5-4

5-4 Installing the Processor and Heatsink ............................................................5-5

Installing an LGA 2011 Processor...................................................................5-5

Installing and Removing a Passive CPU Heatsink.........................................5-8

5-5 Installing Memory............................................................................................ 5-9

Memory Support..............................................................................................5-9

DIMM Installation ............................................................................................ 5-9

5-4 Serverboard Details ...................................................................................... 5-12

5-7 Connector Deﬁnitions ...................................................................................5-15

Power Connectors ...................................................................................5-15

Power Button ........................................................................................... 5-15

Reset Button ...........................................................................................5-16

Power Fail LED........................................................................................ 5-16

Overheat (OH)/Fan Fail/PWR Fail/UID LED............................................5-16

NIC1/NIC2 LED Indicators.......................................................................5-16

HDD/UID LED .......................................................................................... 5-16

Power LED ..............................................................................................5-17

NMI Button ............................................................................................... 5-17

Ethernet Ports .......................................................................................... 5-17

Chassis Intrusion ..................................................................................... 5-17

Video Connection..................................................................................... 5-17

Universal Serial Bus (USB)...................................................................... 5-18

TPM/Port 80 Header................................................................................ 5-18

Unit Identiﬁer Switch/UID LED Indicator.................................................. 5-19

Internal Speaker.......................................................................................5-19

Standby Power Header............................................................................ 5-19

Power SMB (I2C) Connector .................................................................... 5-20

IPMB......................................................................................................... 5-20

Fan Headers............................................................................................. 5-20

S-SGPIO and I-SGPIO 1/2 Headers........................................................ 5-20

Table of Contents

5-8 Jumper Settings............................................................................................ 5-21

Explanation of Jumpers ................................................................................5-21

CMOS Clear.............................................................................................5-21

LAN Enable/Disable................................................................................. 5-22

Watch Dog Enable/Disable ......................................................................5-22

VGA Enable.............................................................................................. 5-22

BMC Enable ............................................................................................ 5-22

I2C Bus to PCI-E Slots.............................................................................5-23

Manufacturer Mode Select....................................................................... 5-23

5-9 Onboard LED Indicators ...............................................................................5-24

GLAN LEDs.............................................................................................. 5-24

IPMI Dedicated LAN LEDs....................................................................... 5-24

BMC Heartbeat LED ................................................................................5-24

Onboard Power LED ............................................................................... 5-25

5-10 SATA Connections......................................................................................... 5-25

SATA 3.0 Ports......................................................................................... 5-25

5-11 Installing Software......................................................................................... 5-26

SuperDoctor 5............................................................................................... 5-27

5-12 Serverboard Battery...................................................................................... 5-29

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans................................................................................................... 6-2

System Fan Failure......................................................................................... 6-3

6-4 Drive Bay Installation/Removal.......................................................................6-4

Removing the Front Bezel..............................................................................6-4

Accessing the Drive Bays............................................................................... 6-4

Hard Drive Installation.....................................................................................6-5

DVD-ROM Drive Installation ...........................................................................6-6

6-5 Power Supply..................................................................................................6-7

Redundant Power Supply Failure ..............................................................6-7

SUPERSERVER 6018R-WTR(T) USER'S MANUAL

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility..............................................................................7-1

How To Change the Conﬁguration Data......................................................... 7-2

Starting the Setup Utility................................................................................. 7-2

7-2 Main Setup......................................................................................................7-2

7-3 Advanced Setup Conﬁgurations......................................................................7-3

7-4 Event Logs....................................................................................................7-23

7-5 IPMI...............................................................................................................7-25

7-6 Boot...............................................................................................................7-27

7-7 Security......................................................................................................... 7-28

7-8 Save & Exit................................................................................................... 7-29

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁcations

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SBI-7126T-SH Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-8+ Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6022P-i Bedienungsanleitung

Supermicro

Supermicro ASG-1014S-ACR12N4H Bedienungsanleitung

Supermicro

Supermicro X5DPR-iG2 Plus Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9D-4CN8TP Bedienungsanleitung

Supermicro

Supermicro SuperServer SSG-520P-ACTR12L Bedienungsanleitung

Supermicro

Supermicro 7043P-8R Bedienungsanleitung

Supermicro

Supermicro Super FatTwin F627G3-FT+ Bedienungsanleitung

Supermicro

Supermicro FatTwin F628G3-FT+ Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-741GE-TNRT Bedienungsanleitung

Supermicro

Supermicro FatTwin AS -F1114S-FT Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029BT-HTR Bedienungsanleitung

Supermicro

Supermicro AS-4124GS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6049P-E1CR45H Bedienungsanleitung

Supermicro

Supermicro AS -1124US-TNRP Bedienungsanleitung

Supermicro

Supermicro SuperServer AS-3015A-I Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E403-12P-FN2T Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E200-12A-4C Bedienungsanleitung

Supermicro

Supermicro SuperServer 620P-ACR16H Bedienungsanleitung

Supermicro

Supermicro SuperServer 6048R-TXR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5013C-M8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6035B-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-MHN2 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung