Supermicro 2042G-72RF4 Bedienungsanleitung

A+ SERVER

2042G-72RF4

USER’S MANUAL

Revision 1.0c

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR

INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSI-

BILITY OF SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR

ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUD-

ING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING

SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harm-

ful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0c

Release Date: December 22, 2017

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use. Installation and maintenance

should be performed by experienced technicians only.

A+ SC828TQ+-R1K43LPB Server Manual

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-1

Processors ...................................................................................................... 1-1

Memory ........................................................................................................... 1-2

SAS ................................................................................................................. 1-2

Serial ATA........................................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-2

Ethernet Ports ................................................................................................. 1-2

Onboard Controllers/Ports .............................................................................. 1-3

Graphics Controller ......................................................................................... 1-3

IPMI................................................................................................................. 1-3

Other Features................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-4

System Power................................................................................................. 1-4

SAS/SATA Subsystem..................................................................................... 1-4

Front Control Panel......................................................................................... 1-4

I/O Backplane.................................................................................................. 1-4

Cooling System............................................................................................... 1-4

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview............................................................................................................. 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions!............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

 ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

Preface

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Locking Tabs ................................................................................................... 2-5

Releasing the Inner Rail ................................................................................. 2-5

Installing The Inner Rails on the Chassis....................................................... 2-6

Installing the Outer Rails on the Rack............................................................ 2-7

Standard Chassis Installation ......................................................................... 2-8

2-6 Checking the Serverboard Setup.................................................................... 2-9

2-7 Preparing to Power On ................................................................................. 2-10

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-2

Power .............................................................................................................. 3-2

Reset............................................................................................................... 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Power Fail ....................................................................................................... 3-2

Information LED .............................................................................................. 3-3

NIC2 ................................................................................................................ 3-3

NIC1 ................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-4

3-4 SAS Drive Carrier LEDs ................................................................................. 3-4

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

A+ SC828TQ+-R1K43LPB Server Manual

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

Connecting Power Cables .............................................................................. 5-2

Connecting the Control Panel......................................................................... 5-2

5-3 I/O Ports.......................................................................................................... 5-3

5-4 Processor and Heatsink Installation................................................................ 5-4

Installing a Passive CPU Heatsink ................................................................. 5-6

5-5 Installing Memory............................................................................................ 5-7

 .................................................... 5-9

5-6 Serverboard Details ...................................................................................... 5-10

H8QG7-LN4F Quick Reference .................................................................... 5-10

 ................................................................................... 5-13

5-8 Jumper Settings ............................................................................................ 5-21

Explanation of Jumpers ................................................................................ 5-21

5-9 Onboard Indicators........................................................................................ 5-23

5-10 SAS and SATA Drive Connections ............................................................... 5-24

5-11 Enabling SATA RAID..................................................................................... 5-25

Serial ATA (SATA).......................................................................................... 5-25

Installing the OS/SATA Driver ....................................................................... 5-25

Building a Driver Diskette......................................................................... 5-25

Enabling SATA RAID in the BIOS................................................................. 5-26

Using the Adaptec RAID Utility ..................................................................... 5-27

Installing the RAID Driver During OS Installation......................................... 5-27

5-12 Installing Software......................................................................................... 5-28

SuperDoctor III.............................................................................................. 5-29

5-13 Serverboard Battery...................................................................................... 5-31

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-2

System Fan Failure......................................................................................... 6-3

Replacing System Fans .................................................................................. 6-3

Preface

vii

6-4 SAS/SATA Drive Installation and Removal ..................................................... 6-4

SAS/SATA Drive Backplane ............................................................................ 6-6

6-5 Slim DVD Drive Installation............................................................................. 6-7

6-6 Power Supply.................................................................................................. 6-7

Power Supply Failure...................................................................................... 6-7

Removing/Replacing the Power Supply.......................................................... 6-7

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Menu ...................................................................................................... 7-2

7-3 Advanced Settings Menu ................................................................................ 7-3

7-4 Security Settings Menu ................................................................................. 7-16

7-5 Boot Settings Menu....................................................................................... 7-16

7-6 Exit Menu ...................................................................................................... 7-18

Appendix A BIOS Error Beep Codes

Appendix B System Specications

A+ SC828TQ+-R1K43LPB Server Manual

viii

Notes

Chapter 1

Introduction

1-1 Overview

The A+ SERVER 2042G-72RF4 is a high-end server that is comprised of

two main subsystems: the SC828TQ+-R1K43LPB 2U server chassis and the

H8QG7-LN4F quad processor motherboard. Please refer to our web site for

information on operating systems that have been certified for use with the

2042G-72RF4 (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components are

included, as listed below:

• Four (4) 2U Passive CPU Heatsinks for AMD Socket G34 (SNK-P0043P)

• SAS/SATA Accessories:

One (1) SAS/SATA backplane (BPN-SAS-828TQ)

Six (6) hot-swap drive carriers (MCP-220-00001-01)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

• Product manuals: http://www.supermicro.com/support/manuals/

• Product drivers and utilities: ftp://ftp.supermicro.com

• Product safety information:

http://super-dev/about/policies/safety_information.cfm

For support, email [email protected].

1-2 Motherboard Features

At the heart of the A+ SERVER 2042G-72RF4 is one H8QG7-LN4F quad processor

motherboard based on the SR5690/SR5670/SP5100 chipset.

Processors

The H8QG7-LN4F supports four AMD Opteron 6000 series (Socket G34 type)

processors. Please refer to our web site for a complete listing of supported

processors (www.supermicro.com).

Chapter 1: Introduction

1-1

1-2

A+ SERVER 2042G-72RF4 User's Manual

Memory

The H8QG7-LN4F has thirty-two (32) single/dual/tri/quad channel DIMM slots

supporting up to 1 TB of DDR3-1333/1066/800 registered ECC or 256 GB of DDR3

Unbuffered ECC/non-ECC SDRAM. See Chapter 5 Section 6 for more details on

installing memory into the system.

SAS

An LSI 2208 SAS2 controller is integrated into the H8QG7-LN4F to provide an

eight port SAS (Serial Attached SCSI) subsystem, which is RAID 0, 1, 5, 6, 10,

and 50 supported. The SAS drives are hot-swappable units. SR and IT modes

are supported but not IR.

Note: Your operating system must have RAID support to enable the RAID function

and hot-swap capability of the SAS drives.

Serial ATA

The South Bridge (SP5100) of the chipset includes a Serial ATA controller for six

3Gb/s SATA drives. The hot-swappable SATA drives are connected to a backplane



are supported. Refer to the support area of our web site for procedures on setting

up RAID on your system.

PCI Expansion Slots

The H8QG7-LN4F board has two PCI Express 2.0 x16 slots and two PCI Express

2.0 x8 slots.

Ethernet Ports

An Intel® network controller is integrated into each of the motherboards to support

four Gigabit LAN ports (100/1000Base-T/1000BaseTX, RJ45 output).

Onboard Controllers/Ports

Onboard I/O backpanel ports on the motherboard include one COM port, a VGA

port, two USB ports, a dedicated IPMI LAN port and four Gigabit LAN (NIC) ports.

Graphics Controller

The H8QG7-LN4F features an integrated Matrox G200eW graphics chip, which

includes 16 MB of DDR2 memory.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 5039C-I Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028R-TDW Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014A-8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 110P-FRN2T Bedienungsanleitung

Supermicro

Supermicro 34140315 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220HE-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6029TP-HTR Bedienungsanleitung

Supermicro

Supermicro SuperStorage Server 2028R-NR48N Bedienungsanleitung

Supermicro

Supermicro SuperServer 1027R-73DBRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 1027R-WTRFTP Bedienungsanleitung

Supermicro

Supermicro 1027R-73DAF Bedienungsanleitung

Supermicro

Supermicro 4048B-TR4FT Bedienungsanleitung

Supermicro

Supermicro SuperServer 6010L Bedienungsanleitung

Supermicro

Supermicro A+ Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-621BT-DNTR Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBI-311A-1C2 Bedienungsanleitung

Supermicro

Supermicro AS -5019D-FTN4 Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-211GT-HNTF Bedienungsanleitung

Supermicro

Supermicro SuperServer 5029C-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 6013P-T Bedienungsanleitung

Supermicro

Supermicro SuperServer 220U-TNR Bedienungsanleitung

Supermicro

Supermicro MicroBlade MBE-628L-416 Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-2115GT-HNTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019D-4C-FN8TP Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung