Supermicro SuperServer 1017R-WR Bedienungsanleitung

SUPERSERVER

1017R-WR

SUPER

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harm-

ful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: October 10, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 1017R-WR.

Installation and maintainance should be performed by experienced technicians only.

The SuperServer 1017R-WR is a 1U rackmount server based on the SC514-R400W

chassis and the X9SRW-F motherboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X9SRW-F motherboard and

the SC514-R400W chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the 1017R-WR into a rack and

check out the server conguration prior to powering up the system. If your server

was ordered without processor and memory components, this chapter will refer you

to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 1017R-WR.

SUPERSERVER 1017R-WR User's Manual

Chapter 5: Advanced Motherboard Setup

Chapter 5 provides detailed information on the X9SRW-F motherboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconguring the

motherboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC514-R400W server chassis.

You should follow the procedures given in this chapter when installing or removing

drives and when replacing system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Notes

Preface

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Motherboard Features..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SATA .............................................................................................................. 1-2

SCU SATA ...................................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-2

Intel®Intelligent Power Node Manager (NM).................................................. 1-2

1-3 Server Chassis Features ................................................................................ 1-3

System Power................................................................................................. 1-3

Hard Drive Subsystem .................................................................................... 1-3

Front Control Panel......................................................................................... 1-3

Cooling System............................................................................................... 1-3

1-4 Contacting Supermicro.................................................................................... 1-5

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

2-4 Warnings and Precautions.............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Rear Inner Rails ........................................................................ 2-4

Installing the Rack Rails ................................................................................. 2-5

Installing the Server into the Rack.................................................................. 2-6

Installing the Server into a Telco Rack ........................................................... 2-7

SUPERSERVER 1017R-WR User's Manual

vii

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Universal Information LED .............................................................................. 3-2

NIC2 ................................................................................................................ 3-3

NIC1 ................................................................................................................ 3-3

HDD................................................................................................................. 3-3

Power .............................................................................................................. 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

Warning Denition ........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Motherboard Setup

5-1 Handling the Motherboard .............................................................................. 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Processor and Heatsink Installation................................................................ 5-2

Installing an LGA2011 Processor.................................................................... 5-2

Installing a CPU Heatsink ............................................................................... 5-5

Removing the Heatsink................................................................................... 5-5

5-3 Connecting Cables.......................................................................................... 5-6

Connecting Data Cables ................................................................................. 5-6

Connecting Power Cables .............................................................................. 5-6

Connecting the Control Panel......................................................................... 5-6

Table of Contents

viii

SUPERSERVER 1017R-WR User's Manual

5-4 I/O Ports.......................................................................................................... 5-7

5-5 Installing Memory............................................................................................ 5-8

Memory Support.............................................................................................. 5-9

Memory Population Guidelines ..................................................................... 5-10

5-6 Adding PCI Expansion Cards ........................................................................5-11

5-7 Motherboard Details...................................................................................... 5-12

X9SRW-F Quick Reference .......................................................................... 5-13

5-8 Connector Denitions.................................................................................... 5-15

5-9 Jumper Settings ............................................................................................ 5-21

5-10 Onboard Indicators........................................................................................ 5-24

5-11 SATA Ports .................................................................................................... 5-25

5-12 Installing Software......................................................................................... 5-26

SuperDoctor III.............................................................................................. 5-27

5-13 Onboard Battery............................................................................................ 5-29

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-2

System Fan Failure......................................................................................... 6-2

6-4 Hard Drive Installation..................................................................................... 6-4

Hard Drive Installation..................................................................................... 6-4

6-5 Power Supply.................................................................................................. 6-6

Power Supply Failure................................................................................. 6-6

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

How To Change the Conguration Data ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

7-3 Advanced Setup Congurations...................................................................... 7-4

7-4 Chipset Conguration Settings ..................................................................... 7-21

7-5 Server Management...................................................................................... 7-29

7-6 Boot............................................................................................................... 7-31

7-7 Security ......................................................................................................... 7-33

7-8 Save & Exit ................................................................................................... 7-34

Appendix A BIOS Error Beep Codes

Appendix B System Specications

Chapter 1

Introduction

1-1 Overview

The SuperServer 1017R-WR is a 1U server comprised of two main subsystems:

the SC514-R400W chassis and the X9SRW-F motherboard. Please refer to our

website for information on operating systems that have been certied for use with

the system (www.supermicro.com).

In addition to the motherboard and chassis, various hardware components have

been included with the 1017R-WR, as listed below:

•Four 4-cm chassis fans (FAN-0156L4)

•One passive CPU heatsink (SNK-P0047PS)

•Two riser cards (RSC-R1UW-E8R and RSC-R1UW-2E16)

Rackmount Rail Kit

•One outer rail kit (MCP-290-00102-0N)

•One inner rail kit (MCP-290-00108-0N)

Note: For your system to work properly, please follow the links below to download

all necessary drivers/utilities and the user’s manual for your server.

•Supermicro product manuals: http://www.supermicro.com/support/manuals/

•Product drivers and utilities: ftp://ftp.supermicro.com

•Product safety info: http://super-dev/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 1017R-WR User's Manual

1-2 Motherboard Features

At the heart of the SuperServer 1017R-WR lies the X9SRW-F, a single processor

motherboard based on the Intel® C600-A/D chipset. Below are the main features

of the X9SRW-F. (See Figure 1-1 for a block diagram of the chipset.)

Processors

The X9SRW-F supports a single Intel® Xeon E5-2600/E5-1600 series processor in

an LGA2011 socket. Please refer to our website for a complete listing of supported

processors (www.supermicro.com).

Memory

The X9SRW-F has eight DIMM sockets to support up to 512 GB of ECC

LRDIMM, 256 GB of ECC RDIMM or 64 GB of ECC/non-ECC UDIMM DDR3-

1866/1600/1333/1066 memory. Please refer to Chapter 5 for installing memory.

SATA

A SATA controller is integrated into the chipset to provide a six-port, SATA subsys-

tem, which is RAID 0, 1, 5 and 10 supported. The SATA drives are hot-swappable

units. Two of the ports support SATA 3.0 (6 Gb/s) while the other four are SATA

2.0 (3 Gb/s) ports.

Note: You must have RAID set up to enable the hot-swap capability of the SATA

drives. Documentation on RAID setup guidelines can be found on our web site.

SCU SATA

An additional SCU SATA controller integrated into the chipset provides four SATA 2.0

ports. RAID 0, 1 and 10 are supported. The SATA drives are hot-swappable units.

Note: You must have RAID set up to enable the hot-swap capability of the SATA

drives. Documentation on RAID setup guidelines can be found on our web site.

Onboard Controllers/Ports

The color-coded I/O ports include one COM port, a VGA (monitor) port, four USB

2.0 ports, two gigabit Ethernet ports and an IPMI port.

Intel®Intelligent Power Node Manager (NM)

The Intel®Intelligent Power Node Manager (IPNM) provides your system with

real-time thermal control and power management for maximum energy efciency.

Although IPNM Specication Version 1.5 is supported by the BMC (Baseboard

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-121H-TNR Bedienungsanleitung

Supermicro

Supermicro AS-2020A-8R Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018A-TN7B Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-121H-TNR Montageanleitung

Supermicro

Supermicro MicroBlade MBI-310T-4C2 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6027R-72RF Bedienungsanleitung

Supermicro

Supermicro superserver 5019S-ML Bedienungsanleitung

Supermicro

Supermicro AS -1024US-TRT Bedienungsanleitung

Supermicro

Supermicro SuperStorage L-Serie Bedienungsanleitung

Supermicro

Supermicro SUPERO SUPERSERVER 2027GR-TRF Bedienungsanleitung

Supermicro

Supermicro A+ 1014S-WTRT Bedienungsanleitung

Supermicro

Supermicro SBA-7222G-T2 Bedienungsanleitung

Supermicro

Supermicro 8050 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6029P-TR Bedienungsanleitung

Supermicro

Supermicro A+ AS-1113S-WN10RT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6028TP-HTR-SIOM Bedienungsanleitung

Supermicro

Supermicro SuperServer 5029C-TN2 Bedienungsanleitung

Supermicro

Supermicro SuperServer 4027GR-TR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018D-FN8T Bedienungsanleitung

Supermicro

Supermicro AS-1021M-82 Bedienungsanleitung

Supermicro

Supermicro SuperServer 6013P-8 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6012P-i Bedienungsanleitung

Supermicro

Supermicro SUPER SUPERSERVER 2028U Series Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015P-8(R) Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung