Supermicro SUPERSERVER 6028TP-HTR-SIOM Bedienungsanleitung

USER'S MANUAL

Revision 1.0a

SUPERSERVER®

6028TP-HTR-SIOM

6028TP-HC0R-SIOM

6028TP-HC1R-SIOM

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0a

Release Date: February 09, 2018

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer

6028TP-HTR/HC0R/HC1R-SIOM. Installation and maintenance should be

performed by experienced technicians only.

The SuperServer 6028TP-HTR/HC0R/HC1R-SIOM is a high-end server based

on the SC827HQ+-R2K04BP2 2U rackmount chassis and the dual processor

X10DRT-PS serverboard. All models have four serverboard nodes with three hot-

swap Hard Disk Drives (HDD) for each per node.

Manual Organization

Chapter 1: Introduction

            

server system and describes the main features of the X10DRT-PS serverboard and

the SC827HQ+-R2K04BP2 chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer



prior to powering up the system. If your server was ordered without processor and

memory components, this chapter will refer you to the appropriate sections of the

manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Safety Warnings

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 6028TP-HTR/HC0R/HC1R-SIOM.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRT-PS serverboard, including

the locations and functions of connections, headers and jumpers. Refer to

this chapter when adding or removing processors or main memory and when



SUPERSERVER 6028TP-HTR/HC0R/HC1R-SIOM USER'S MANUAL

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC827HQ+-R2K04BP2 server

chassis. You should follow the procedures given in this chapter when installing,

          

units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Specications

Appendix C: Chinese Safety Warnings

SUPERSERVER 6028TP-HTR/HC0R/HC1R-SIOM USER'S MANUAL

Notes

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SAS ................................................................................................................. 1-2

SATA................................................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-3

I/O Ports.......................................................................................................... 1-3

Graphics Controller ......................................................................................... 1-3

1-3 Server Chassis Features ................................................................................ 1-4

System Power................................................................................................. 1-4

Front Control Panel......................................................................................... 1-4

Cooling System............................................................................................... 1-4

Air Shrouds ..................................................................................................... 1-4

Mounting Rails ................................................................................................ 1-4

1-4 Contacting Supermicro.................................................................................... 1-6

1-5 2U Twin2: System Notes ................................................................................. 1-7

Nodes.............................................................................................................. 1-7

System Power................................................................................................. 1-7

Hard Drive Backplane/Drives.......................................................................... 1-7

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

2-4 Warnings and Precautions .............................................................................. 2-2

Choosing a Setup Location............................................................................. 2-2

Rack Precautions............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

 ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-5 Installing the System into a Rack ................................................................... 2-4

Separating the Sections of the Rack Rails..................................................... 2-4

SUPERSERVER 6028TP-HTR/HC0R/HC1R-SIOM USER'S MANUAL

vii

Installing the Inner Rail Extension .................................................................. 2-5

Outer Rack Rails............................................................................................. 2-6

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Button....................................................................................... 3-2

Power .............................................................................................................. 3-2

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheat.......................................................................................................... 3-2

NIC1 ................................................................................................................ 3-2

3-4 Drive Carrier LEDs.......................................................................................... 3-3

SATA Drives .................................................................................................... 3-3

SAS Drives...................................................................................................... 3-3

Chapter 4 Standardized Warning Statements for AC Systems

4-1 About Standardized Warning Statements....................................................... 4-1

........................................................................................... 4-1

Installation Instructions.................................................................................... 4-4

Circuit Breaker ................................................................................................ 4-5

Power Disconnection Warning ........................................................................ 4-6

Equipment Installation..................................................................................... 4-8

Restricted Area................................................................................................ 4-9

Battery Handling............................................................................................ 4-10

Redundant Power Supplies .......................................................................... 4-12

Backplane Voltage ........................................................................................ 4-13

Comply with Local and National Electrical Codes........................................ 4-14

Product Disposal........................................................................................... 4-15

Hot Swap Fan Warning................................................................................. 4-16

Power Cable and AC Adapter ...................................................................... 4-18

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-1

5-2 Connecting Cables.......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

5-3 Rear I/O Ports................................................................................................. 5-3

5-4 Processor and Heatsink Installation................................................................ 5-4

Installing a Passive CPU Heatsink ................................................................. 5-7

Removing the Heatsink................................................................................... 5-8

5-5 Installing Memory............................................................................................ 5-9

Memory Support.............................................................................................. 5-9

Table of Contents

viii

Memory Support for E5-2600 (v3)-based Serverboards.......................... 5-10

Memory Support for E5-2600 (v4)-based Serverboards...........................5-11

5-6 Adding PCI Expansion Cards ........................................................................5-11

5-7 Serverboard Details ...................................................................................... 5-12

X10DRT-PS Quick Reference....................................................................... 5-13

 .................................................................................... 5-14

5-9 Jumper Settings ............................................................................................ 5-16

Explanation of Jumpers ................................................................................ 5-16

5-10 Onboard Indicators........................................................................................ 5-18

5-11 PCI-Express and SATA Connections............................................................ 5-20

5-12 Installing Software......................................................................................... 5-21

SuperDoctor® 5 ............................................................................................ 5-22

5-13 Onboard Battery............................................................................................ 5-23

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 Chassis Cover................................................................................................. 6-3

6-4 Air Shrouds ..................................................................................................... 6-4

  ....................................................................................... 6-5

6-6 System Fans ................................................................................................... 6-5

 ........................................................................... 6-5

6-7 Removing and Installing the Backplane.......................................................... 6-8

Removing the Backplane ................................................................................ 6-8

Installing the Backplane................................................................................ 6-10

6-8 Installing the Serverboard ..............................................................................6-11

I/O Shield .......................................................................................................6-11

Permanent and Optional Standoffs................................................................6-11

6-9 Adapter Card Replacement........................................................................... 6-13

Installing an Add-on Card ............................................................................. 6-14

6-10 Drive Bay Installation/Removal ..................................................................... 6-15

Accessing the Drive Bays ............................................................................. 6-15

6-11 Power Supply................................................................................................ 6-19

Power Supply Replacement.......................................................................... 6-19

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

SUPERSERVER 6028TP-HTR/HC0R/HC1R-SIOM USER'S MANUAL

......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup...................................................................................................... 7-2

 ...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-32

7-5 IPMI............................................................................................................... 7-34

7-6 Security Settings ........................................................................................... 7-36

7-7 Boot Settings................................................................................................. 7-37

7-8 Save & Exit ................................................................................................... 7-39

Appendix A BIOS Error Beep Codes

Appendix B System Specications

Appendix C Chinese Safety Warnings

Table of Contents

Notes

SUPERSERVER 6028TP-HTR/HC0R/HC1R-SIOM USER'S MANUAL

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SYS-221P-C9R Bedienungsanleitung

Supermicro

Supermicro SuperServer 120U-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014P-32 Bedienungsanleitung

Supermicro

Supermicro SuperServer 420GH-TNGR Bedienungsanleitung

Supermicro

Supermicro 5018D-FN4T Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-620P-1C3N Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-116EL1 Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028BT-HTR+ Bedienungsanleitung

Supermicro

Supermicro SuperStorage 1029P-NEL32R Bedienungsanleitung

Supermicro

Supermicro SuperServer E100-12T Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBA-4119SG Bedienungsanleitung

Supermicro

Supermicro SuperServer 6039P-TXRT Bedienungsanleitung

Supermicro

Supermicro A+ AS-1125HS-TNR Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 5013G-6 Bedienungsanleitung

Supermicro

Supermicro SuperStorageSystem 6048R-E1CR45H Bedienungsanleitung

Supermicro

Supermicro AS-1024US-TRT Bedienungsanleitung

Supermicro

Supermicro 8015C-T Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6018TR-T Bedienungsanleitung

Supermicro

Supermicro A+ Server 2123BT-HTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6013P-T Bedienungsanleitung

Supermicro

Supermicro SERIES3800/S120T Bedienungsanleitung

Supermicro

Supermicro A+ Server AS -1015SV-WTNRT Bedienungsanleitung

Supermicro

Supermicro SBA-7222G-T2 Bedienungsanleitung

Supermicro

Supermicro SuperServer 2016Ti-HTRF Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung