Supermicro 8U SuperBlade Bedienungsanleitung

8U SuperBlade®

User’s Manual

Revision 1.0

5 MP and 10 DP Blade System

20 DP Blade System

8U SuperBlade User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS PRODUCT MAY

EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO

CAUSE BIRTH DEFECTS AND OTHER REPRODUCTIVE HARM.

Manual Revision 1.0

Release Date: July 10, 2017

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of Supermicro's 8U SuperBlade system. Installation and

maintenance should be performed by experienced professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the blade

system and describes the main features of the mainboard and enclosure. A quick start

procedure is also provided for your use.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing the 8U SuperBlade.

Chapter 3: Setup and Installation

Refer here for details on installing the 8U SuperBlade system into a rack.

Chapter 4: System Modules

This chapter covers modules in the 8U SuperBlade system, as well as the CMM module

and configuring double-wide bays.

Chapter 5: Power Supply Modules

This chapter covers the system power supplies and their installation.

Appendix A: System Specifications

This appendix provides a summary of system specifications.

8U SuperBlade User’s Manual

Notes

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview.............................................................................................1-1

1-2 Quick Start Setup ..............................................................................1-1

1-3 Software Mode Selection .................................................................1-2

1-4 Product Checklist of Typical Components.....................................1-3

1-5 Blade Enclosure Features ...............................................................1-6

Power......................................................................................................1-7

Middle Plane ...........................................................................................1-7

LEDs .......................................................................................................1-7

Enclosure Cooling...................................................................................1-7

1-6 Power Supply Features....................................................................1-8

Power Supply Modules ...........................................................................1-9

Power Cord ........................................................................................1-10

Power Supply Failure.........................................................................1-10

1-7 Special Design Features................................................................1-10

Operating System Support....................................................................1-10

Remote Management ...........................................................................1-10

Computing Density/Power ....................................................................1-10

High-Efficiency Power Supplies ............................................................1-11

1-8 Returning Merchandise for Service..............................................1-11

1-9 Contacting Supermicro...................................................................1-12

Chapter 2 Standardized Warning Statements.....................2-1

2-1 About Standardized Warning Statements .....................................2-1

Warning Definition...................................................................................2-1

Installation Instructions ...........................................................................2-3

Circuit Breaker ........................................................................................2-4

Power Disconnection Warning ................................................................2-5

Equipment Installation.............................................................................2-6

Restricted Area .......................................................................................2-7

Battery Handling .....................................................................................2-9

Redundant Power Supplies ..................................................................2-10

Backplane Voltage ................................................................................2-11

Comply with Local and National Electrical Codes.................................2-12

Product Disposal...................................................................................2-13

Hot Swap Fan Warning .........................................................................2-14

8U SuperBlade User’s Manual

Power Cable and AC Adapter ..............................................................2-15

Chapter 3 Setup and Installation.................................................3-1

3-1 Overview.............................................................................................3-1

3-2 Unpacking the System .....................................................................3-1

Choosing a Setup Location.....................................................................3-1

Rack Precautions....................................................................................3-2

Server Precautions .................................................................................3-2

Rack Mounting Considerations ...............................................................3-2

Ambient Operating Temperature ..........................................................3-2

Reduced Airflow ...................................................................................3-2

Mechanical Loading .............................................................................3-2

Circuit Overloading...............................................................................3-3

Reliable Ground ...................................................................................3-3

Installing the System Into a Rack............................................................3-3

Rack Mounting Hardware .......................................................................3-3

Installation...............................................................................................3-4

Chapter 4 System Modules.............................................................4-1

4-1 Chassis Management Module.........................................................4-3

Module Redundancy ...............................................................................4-5

Determining Master/Slave Modules Status.............................................4-5

CMM Module Installation ........................................................................4-5

Configuring the CMM ..............................................................................4-6

CMM Functions.......................................................................................4-9

Remote KVM over IP ...........................................................................4-9

Remote Storage (Virtual Media)...........................................................4-9

Serial Over LAN (SOL).........................................................................4-9

Monitoring Functions............................................................................4-9

Power Consumption Management.....................................................4-10

USB Ports and Reset Button ................................................................4-11

USB Ports ..........................................................................................4-11

Reset Button ......................................................................................4-12

Firmware ...............................................................................................4-12

Web-based Management Utility............................................................4-12

Supported Browsers...........................................................................4-13

Network Connection/Login.................................................................4-13

Address Defaults................................................................................4-13

Home Page ........................................................................................4-14

iii

Chapter 5 Power Supply Modules..............................................5-1

5-1 Power Supply Modules.....................................................................5-1

Power Supply Failure..............................................................................5-4

Installing a Power Supply........................................................................5-4

Removing a Power Supply......................................................................5-4

5-2 Redundant Power Supplies .............................................................5-5

5-3 Power Supply Fans...........................................................................5-6

Appendix A System Specifications........................................... A-1

A-1 Enclosure Specifications ................................................................ A-1

A-2 Environmental Specifications......................................................... A-2

A-3 Address Defaults.............................................................................. A-2

A-4 Power Supply Power Calculations ................................................ A-3

8U SuperBlade User’s Manual

Notes

List of Figures

Figure 3-1. Positioning the Enclosure Template ...............................................3-4

Figure 3-2. Securing the Rails to the Rack .......................................................3-4

Figure 3-3. Attaching the Optional Handles ......................................................3-5

Figure 3-4. Enclosure Installed into Rack .........................................................3-6

Figure 4-1. 8U 820C Enclosure with 100G Switch: Rear View .........................4-1

Figure 4-2. 8U 820C Enclosure with 2x25G

and 2x1/10G Switches: Rear View....................................................................4-2

Figure 4-3. Chassis Management Module MBM-CMM-FIO..............................4-3

Figure 4-4. Chassis Management Module MBM-CMM-001..............................4-4

Figure 4-5. Choose Internal Protocol ................................................................4-7

Figure 4-6. Manually Configure the IP Address ................................................4-7

Figure 4-7. Changing Settings ..........................................................................4-8

Figure 4-8. USB Ports on CMM ......................................................................4-11

Figure 4-9. Home Page...................................................................................4-14

Figure 5-1. PWS-2K21A-BR Power Supply ......................................................5-2

Figure 5-2. PWS-1K20B-BR Battery Backup Power (BPP) Module .................5-3

Figure 5-3. Power Supply Status ......................................................................5-5

8U SuperBlade User’s Manual

Notes

Andere Handbücher für 8U SuperBlade

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro AS-2021M-32R Bedienungsanleitung

Supermicro

Supermicro AS-1023US-TR4 Bedienungsanleitung

Supermicro

Supermicro FatTwin AS -F1114S-FT Bedienungsanleitung

Supermicro

Supermicro SuperServer 620BT-DNTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1015B-3 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-NT Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-E403-9D-16C-IPD2 Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 740GP-TNRT Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 5018D-MTLN4F Bedienungsanleitung

Supermicro

Supermicro SuperServer 620U-TNR Bedienungsanleitung

Supermicro

Supermicro A+ AS-2014TP-HTR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6029BT-HNC0R Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029U-TN24R4T Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-12C Bedienungsanleitung

Supermicro

Supermicro SuperServer F618R2-RC0+ Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029P-C1RT Bedienungsanleitung

Supermicro

Supermicro AS-4020A-8R Bedienungsanleitung

Supermicro

Supermicro SuperServer 7049P-TR Bedienungsanleitung

Supermicro

Supermicro 5038AD-I Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028R-C1R(T)4+ Bedienungsanleitung

Supermicro

Supermicro SuperServer 620P-ACR16H Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-1115S-FWTRT Bedienungsanleitung

Supermicro

Supermicro BPN-SAS3-116EL1 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6015B-3R Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung