Supermicro 8015C-T Bedienungsanleitung

SUPER

SUPERSERVER 8015C-T

USER’S MANUAL

Revision 1.0

Manual Revision 1.0

Release Date: September 12, 2007

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

SUPER MICRO COMPUTER reserves the right to make changes to the product described in this

manual at any time and without notice. This product, including software, if any, and documenta-

tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any

medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO SHALL NOT HAVE

LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE

PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING

OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperServer 8015C-T. Instal-

lation and maintenance should be performed by experienced technicians only.

The SuperServer 8015C-T is a high-end quad processor server based on the

SC818TQ-1000 1U rackmount server chassis and the Super X7QCE serverboard.

The X7QCE supports four Intel® Xeon MP processors - please refer to our web

site for an up-to-date list of supported processors.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X7QCE serverboard

and the SC818TQ-1000 chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 8015C-T into

a rack and check out the server conﬁguration prior to powering up the system. If your

server was ordered without the processor and memory components, this chapter will

refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 8015C-T.

Chapter 5: Advanced Serverboard Setup

iii

Preface

SUPERSERVER 8015C-T User's Manual

Chapter 5 provides detailed information on the X7QCE serverboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC818TQ-1000 1U rackmount

server chassis. You should follow the procedures given in this chapter when install-

ing, removing or reconﬁguring Serial ATA or peripheral drives and when replacing

system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A: BIOS POST Messages

Appendix B: BIOS POST Codes

Appendix C: HostRAID Setup Guidelines

Appendix D: System Speciﬁcations

Preface

Notes

SUPERSERVER 8015C-T User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

Serial ATA ....................................................................................................... 1-2

PCI Expansion Slots ....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-2

ATI Graphics Controller................................................................................... 1-2

IPMI................................................................................................................. 1-3

Other Features ................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-4

System Power ................................................................................................. 1-4

SATA Subsystem............................................................................................. 1-4

Front Control Panel......................................................................................... 1-4

I/O Backplane.................................................................................................. 1-4

Cooling System ............................................................................................... 1-4

1-4 Contacting Supermicro.................................................................................... 1-6

Chapter 2 Server Installation

2-1 Overview ............................................................................................................. 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-2

Rack Precautions ............................................................................................ 2-2

Server Precautions.......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

Ambient Operating Temperature ................................................................ 2-3

Reduced Airﬂow ......................................................................................... 2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ................................................................... 2-4

Identifying the Sections of the Rack Rails...................................................... 2-4

Installing the Inner Rails ................................................................................. 2-4

Installing the Outer Rails................................................................................. 2-5

Locking Tabs .............................................................................................. 2-5

vii

Table of Contents

Installing the Server into the Rack.................................................................. 2-6

2-5 Checking the Serverboard Setup.................................................................... 2-7

2-6 Preparing to Power On ................................................................................... 2-9

Chapter 3 System Interface

3-1 Overview ......................................................................................................... 3-1

3-2 Control Panel Buttons ..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power .............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................ 3-2

Overheat/Fan Fail ........................................................................................... 3-2

NIC2 ................................................................................................................ 3-2

NIC1 ................................................................................................................ 3-2

HDD................................................................................................................. 3-2

Power .............................................................................................................. 3-3

3-4 SATA Drive Carrier LEDs ................................................................................ 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions .......................................................................... 4-1

4-2 General Safety Precautions ............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

Unpacking ....................................................................................................... 5-2

5-2 Serverboard Installation .................................................................................. 5-2

5-3 Connecting Cables.......................................................................................... 5-3

Connecting Data Cables ................................................................................. 5-3

Connecting Power Cables .............................................................................. 5-3

Connecting the Control Panel......................................................................... 5-3

5-4 I/O Ports .......................................................................................................... 5-4

5-5 Installing the Processor and Heatsink ............................................................ 5-5

Memory Support.............................................................................................. 5-8

5-7 Adding PCI Add-On Cards.............................................................................. 5-9

5-8 Serverboard Details ...................................................................................... 5-10

X7QCE Quick Reference ...............................................................................5-11

5-9 Connector Deﬁnitions ................................................................................... 5-12

5-10 Jumper Settings ............................................................................................ 5-18

5-11 Onboard Indicators........................................................................................ 5-22

viii

SUPERSERVER 8015C-T User's Manual

5-12 Floppy, IDE, and SATA Ports ........................................................................ 5-23

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices.................................................................................. 6-1

Precautions ..................................................................................................... 6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Fans ................................................................................................... 6-3

System Fan Failure......................................................................................... 6-3

Replacing System Fans .................................................................................. 6-3

Removing a fan .......................................................................................... 6-3

Installing a new fan .................................................................................... 6-3

6-4 Drive Bay Installation ...................................................................................... 6-4

Removing the Front Bezel .............................................................................. 6-4

Accessing the Drive Bays ............................................................................... 6-5

SATA Drive Installation.................................................................................... 6-6

Mounting a SATA drive in a drive carrier ................................................... 6-6

Installing/removing hot-swap SATA drives ................................................. 6-7

SATA Backplane......................................................................................... 6-7

DVD-ROM and Floppy Drive Installation ........................................................ 6-8

6-5 Power Supply .................................................................................................. 6-9

Power Supply Failure...................................................................................... 6-9

Removing the Power Supply .......................................................................... 6-9

Installing a new Power Supply........................................................................ 6-9

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

Starting BIOS Setup Utility.............................................................................. 7-1

7-2 Main Setup ...................................................................................................... 7-2

7-3 Advanced Settings .......................................................................................... 7-3

7-5 Security Settings ........................................................................................... 7-23

7-6 Exit Options................................................................................................... 7-24

Appendix A BIOS POST Messages

Appendix B BIOS POST Codes

Appendix C HostRAID Setup Guidelines

Appendix D System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The SuperServer 8015C-T is a high-end server that is comprised of two main sub-

systems: the SC818TQ-1000 1U server chassis and the X7QCE quad Intel Xeon

processor serverboard. Please refer to our web site for information on operating

systems that have been certiﬁed for use with the SuperServer 8015C-T (www.

supermicro.com).

In addition to the serverboard and chassis, various hardware components have

been included with the SuperServer 8015C-T, as listed below:

Six (6) 4-cm hot-swap chassis fans (FAN-0086L)

One (1) air shroud (MCP-310-00017-01)

Four (4) CPU passive heatsinks for 1U chassis (SNK-P0028P)

One (1) riser card for PCI-Express x8 in x16 slot (CSE-RR1U-E16)

One (1) slim DVD-ROM drive (DVM-PNSC-S)

One (1) IDE cable for DVD drive (CBL-0139L)

One (1) rail set (CSE-PT51L)

One (1) Super Server 8015C-T User's Manual

SATA Accessories

One (1) SATA backplane (BPN-SAS-818TQ)

Three (3) SATA cables (CBL-0044L)

Three (3) hot-swap drive carriers (CSE-PT39)

One (1) SGPIO cable (CBL-0157L)

•

Chapter 1: Introduction

1-1

1-2

SUPERSERVER 8015C-T User's Manual

1-2 Serverboard Features

At the heart of the SuperServer 8015C-T lies the X7QCE, a quad processor

serverboard based on the Intel 7300 chipset. Below are the main features of the

X7QCE. (See Figure 1-1 for a block diagram of the 7300 chipset).

Processors

The X7QCE supports four Intel Xeon MP 7300/7200 sequence processors of the

same type (it does not support 130W processors). Please refer to the serverboard

description pages on our web site for a complete listing of supported processors

(www.supermicro.com).

Memory

The X7QCE has 24 240-pin DIMM slots that can support up to 192 GB of ECC

FBD (Fully Buffered DIMM) DDR2-667/533 SDRAM. Single channel, two-channel

interleaved and four-channel interleaved memory all all supported. Modules of the

same size and speed should be used. See Chapter 5 Section 5 for details.

Serial ATA

A SATA controller is integrated into the South Bridge (ESB2) section of the chipset

to provide a six-port Serial ATA subsystem, which is RAID 0, 1, 10 and 5 supported.

The Serial ATA drives are hot-swappable units.

Note: The operating system you use must have RAID support to enable the hot-

swap capability and RAID function of the Serial ATA drives.

PCI Expansion Slots

The X7QCE has two PCI-Express x8 slots, one PCI-Express x4 slot and one PCI-X

133 MHz slot.

Onboard Controllers/Ports

One ﬂoppy drive controller and two onboard ATA/100 controllers are provided to

support up to two IDE hard drives or ATAPI devices (one IDE connection is reserved

for a Compact Flash card). The color-coded I/O ports include one COM port (an

additional COM header is located on the serverboard), a VGA (monitor) port, two

USB 2.0 ports, PS/2 mouse and keyboard ports and two Gb Ethernet ports.

ATI Graphics Controller

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer 6013P-8 Bedienungsanleitung

Supermicro

Supermicro A+ Server AS-1124US-TNRP Bedienungsanleitung

Supermicro

Supermicro X13SAE Bedienungsanleitung

Supermicro

Supermicro SuperStorage Server SSG-6049P-E1CR60H Bedienungsanleitung

Supermicro

Supermicro Supero A+ SERVER 1042G-TF Bedienungsanleitung

Supermicro

Supermicro SuperServer 7089P-TR4T Bedienungsanleitung

Supermicro

Supermicro AS-2014CS-TR Bedienungsanleitung

Supermicro

Supermicro SUPER SUPERSERVER 2028U Series Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014A-8 Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBI-610P-1C2N Bedienungsanleitung

Supermicro

Supermicro SuperServer 220U-TNR Bedienungsanleitung

Supermicro

Supermicro SuperServer 2029U-TN24R4T Bedienungsanleitung

Supermicro

Supermicro SuperServer 2028GR-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-4CN10P Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-620H-TN12R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-2049U-TR4 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8048B-TR3 Bedienungsanleitung

Supermicro

Supermicro E100-9AP-IA Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-6029U-E Series Bedienungsanleitung

Supermicro

Supermicro 5038AD-I Bedienungsanleitung

Supermicro

Supermicro SuperStorage SSG-6049SP-DE1CR60 Bedienungsanleitung

Supermicro

Supermicro SuperServer ARS-110M-NR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-MN4 Bedienungsanleitung

Supermicro

Supermicro SuperServer E403-9P-FN2T Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung