Supero SC731 Series Bedienungsanleitung

SC731 CHASSIS SERIES

USER’S MANUAL

1.0c

SC731D-300B SC731i-300B

SUPER ®

Manual Revision 1.0c

Release Date: January 21, 2014

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SC731 chassis. Installation

and maintenance should be performed by experienced technicians only.

Supermicro’s SC731 chassis features a unique and highly optimized design, allow-

ing the user to install components with minimal or no use of screws or tools. The

chassis is equipped with a 300 Watt whisper-quiet, high-efciency power supply

for superb power savings.

This manual lists compatible parts available when this document was published.

Always refer to the our Web site for updates on supported parts and congurations

at www.supermicro.com.

SC731 Chassis Manual

Manual Organization

Chapter 1: Introduction

The rst chapter provides a description of the main components included with this

chassis and describes the main features of the SC731 chassis. This chapter also

includes contact information.

Chapter 2: Warning Statements for AC Systems

This chapter lists warnings, precautions, and system safety. It is recommended that

you thoroughly familiarize yourself with the safety precautions before installing and

servicing this chassis.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Chassis Setup and Maintenance

Follow the procedures given in this chapter when installing, removing, or

reconguring your chassis.

Appendix A: Chassis Cables, Screws and Other

Accessories

Appendix B: Power Supply Specications

Preface

Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Shipping Lists.................................................................................................. 1-1

1-3 Contacting Supermicro.................................................................................... 1-2

1-4 Returning Merchandise for Service................................................................. 1-3

Chapter 2 Standardized Warning Statements for AC Systems

2-1 About Standardized Warning Statements....................................................... 2-1

Warning Denition ........................................................................................... 2-1

Installation Instructions.................................................................................... 2-4

Circuit Breaker ................................................................................................ 2-5

Power Disconnection Warning........................................................................ 2-6

Equipment Installation..................................................................................... 2-8

Restricted Area................................................................................................ 2-9

Battery Handling............................................................................................ 2-10

Redundant Power Supplies .......................................................................... 2-12

Backplane Voltage ........................................................................................ 2-13

Comply with Local and National Electrical Codes........................................ 2-14

Product Disposal........................................................................................... 2-15

Hot Swap Fan Warning................................................................................. 2-16

Power Cable and AC Adapter ...................................................................... 2-18

Chapter 3 Chassis Components

3-1 Components.................................................................................................... 3-1

Drive Bays....................................................................................................... 3-1

Motherboard Support ...................................................................................... 3-1

Power Supply.................................................................................................. 3-1

Fans ................................................................................................................ 3-1

I/O Expansion slots......................................................................................... 3-2

Switches and Status Indicators....................................................................... 3-2

3-2 Unpacking the System .................................................................................... 3-2

3-3 Where to Get Replacement Components....................................................... 3-2

Chapter 4 System Interface

4-1 Overview ......................................................................................................... 4-1

4-2 Control Panel Buttons ..................................................................................... 4-2

4-3 Control Panel LEDs ........................................................................................ 4-2

Overheating..................................................................................................... 4-3

SC731 Chassis Manual

Chapter 5 Chassis Setup and Maintenance

5-1 Overview ......................................................................................................... 5-1

5-2 Removing Power from the System ................................................................. 5-1

5-3 Removing the Chassis Cover ......................................................................... 5-2

5-4 Rotating the Hard Drive Cage......................................................................... 5-3

5-5 Removing and Installing Hard Drives ............................................................. 5-4

5-6 Installing the I/O Shield and Motherboard ...................................................... 5-7

I/O Shield ........................................................................................................ 5-7

Permanent Motherboard Standoffs................................................................. 5-7

Motherboard Installation.................................................................................. 5-8

5-7 Installing an Peripheral Device ....................................................................... 5-9

5-8 Installing Expansion Cards ........................................................................... 5-10

Long Expansion Card Setup..........................................................................5-11

5-9 Installing the System Fan ............................................................................. 5-12

5-10 Installing the Front Bezel .............................................................................. 5-13

5-11 Power Supply ............................................................................................... 5-14

Appendix A Cables, Screws, and Other Accessories

Appendix B SC731 Power Supply Specications

Chapter 1

Introduction

1-1 Overview

Supermicro’s SC731 chassis features a unique and highly-optimized design, allow-

ing most conguration of the chassis to be accomplished without tools or screws.

The chassis is equipped with high-efciency power supply. High-performance fans

provide ample optimized cooling for FB-DIMM memory modules, and four hot-swap

drive bays offer maximum storage capacity.

1-2 Shipping Lists

Please visit the following link for the latest shiping lists and part numbers for

your particular chassis model http://www.supermicro.com/products/chassis/

tower/?chs=731

Chapter 1: Introduction

1-1

SC731 Chassis

Model Drives I/O Slots Power Supply

SC731D-300B

4x 3.5"

2x 5.25"

1x 3.5" for card

reader

4x FF

300W

High-efciency

SC731i-300B 4x 3.5"

2x 5.25"

4x FF 300W

High-efciency

SC731 Chassis Manual

1-2

1-3 Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Web Site: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Web Site: www.supermicro.com

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Tel: +886-(2)-8226-3990

Web Site: www.supermicro.com.tw

1-3

Chapter 1: Introduction

1-4 Returning Merchandise for Service

A receipt or copy of your invoice marked with the date of purchase is required be-

fore any warranty service will be rendered. You can obtain service by calling your

vendor for a Returned Merchandise Authorization (RMA) number. When returning

to the manufacturer, the RMA number should be prominently displayed on the

outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and

handling charges will be applied for all orders that must be mailed when service

is complete.

For faster service, RMA authorizations may be requested online (http://www.super-

micro.com/support/rma/).

Whenever possible, repack the chassis in the original Supermicro carton, using the

original packaging material. If these are no longer available, be sure to pack the

chassis securely, using packaging material to surround the chassis so that it does

not shift within the carton and become damaged during shipping.

This warranty only covers normal consumer use and does not cover damages in-

curred in shipping or from failure due to the alteration, misuse, abuse or improper

maintenance of products.

During the warranty period, contact your distributor rst for any product problems

SC731 Chassis Manual

1-4

Notes

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Supero Chassis Handbücher

Supero

Supero SC822R Bedienungsanleitung

Supero

Supero Supero SC825 Series Bedienungsanleitung

Supero

Supero SC847A-R1400LPB Bedienungsanleitung

Supero

Supero SC219 Chassis Series Bedienungsanleitung

Supero

Supero CSE-101 Bedienungsanleitung

Supero

Supero SC847J SAS2 Series Bedienungsanleitung

Supero

Supero SC111 Series Bedienungsanleitung

Supero

Supero SC811TQ-600B Bedienungsanleitung

Supero

Supero Supero SC825 Series Bedienungsanleitung

Supero

Supero SC828 Series Bedienungsanleitung

Supero

Supero SC113 Series Bedienungsanleitung

Supero

Supero SC510T-200B Bedienungsanleitung

Supero

Supero SC510-200B Bedienungsanleitung

Supero

Supero SC847 Series Bedienungsanleitung

Supero

Supero SC513-L260 Series Bedienungsanleitung

Supero

Supero SC836TQ-R800V Bedienungsanleitung

Supero

Supero Supero SC733 Series Bedienungsanleitung

Supero

Supero SC813 Series Bedienungsanleitung

Supero

Supero SC113 Series Bedienungsanleitung

Supero

Supero SC835 Chassis Series Bedienungsanleitung

Supero

Supero SC512F-280 Bedienungsanleitung

Supero

Supero Supero SC743 Bedienungsanleitung

Supero

Supero SC835TQ Bedienungsanleitung

Supero

Supero SC812L Series Bedienungsanleitung

Beliebte Chassis Handbücher anderer Marken

Advantech

Advantech IPC-623 Series Bedienungsanleitung

IMC Networks

IMC Networks iMcV/18 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR665 V3 Bedienungsanleitung

Wuntronic

Wuntronic PCI4DRQ Bedienungsanleitung

EtherWAN

EtherWAN EMC400 Bedienungsanleitung

Overland Storage

Overland Storage SnapSAN S1000 Leitfaden

Philips

Philips LC4.1E A Bedienungsanleitung

Supermicro

Supermicro SCF418 Series Bedienungsanleitung

Chenbro

Chenbro RM437 Series Bedienungsanleitung

Pickering

Pickering 40-914 Bedienungsanleitung

HP A7503-S Montageanleitung

Supermicro

Supermicro SC823MTQ-R700LPB Bedienungsanleitung

SilverStone

SilverStone RMS08 Series Bedienungsanleitung

NI cRIO-FRC II Bedienungsanleitung

Pickering

Pickering 65-200 Bedienungsanleitung

Allied Telesis

Allied Telesis AT-MMCR18 Bedienungsanleitung

Hisense

Hisense MSD6586 Bedienungsanleitung

Cisco

Cisco Nexus 7010 Bedienungsanleitung