Supero SC818G-1400B Bedienungsanleitung
SC818G Chassis Series
SC818G-1400B
USER’S MANUAL
1.0
SUPER ®
SC818G Chassis Manual
ii
Manual Revision 1.0
Release Date: July 31, 2009
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software, if any,
and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2009 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SC818G 1U chassis. Instal-
lation and maintenance should be performed by experienced technicians only.
Supermicro's SC818 1U chassis features a unique and highly-optimized design for
quad-processor platforms. The chassis is equipped with a 1400W power supply to
support high-performance system components and eight high-speed heavy duty
counter-rotating fans for optimal cooling. Quick release slide rails also available for
HPC and datacenter use.
This document lists compatible parts available when this document was published.
Always refer to the our Web site for updates on supported parts and congura-
tions.
SC818G Chassis Manual
iv
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with this
chassis and describes the main features of the SC818G chassis. This chapter also
includes contact information.
Chapter 2: System Safety
This chapter lists warnings, precautions, and system safety. You should thoroughly
familiarize yourself with this chapter for a general overview of safety precautions
that should be followed before installing and servicing this chassis.
Chapter 3: Chassis Components
Refer here for details on this chassis model including the fans, bays, airow shields,
and other components.
Chapter 4: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 5: Chassis Setup and Maintenance
Refer to this chapter for detailed information on this chassis. You should follow the
procedures given in this chapter when installing, removing, or reconguring your
chassis.
Chapter 6: Rack Installation
Refer to this chapter for detailed information on chassis rack installation. You should
follow the procedures given in this chapter when installing, removing or reconguring
your chassis into a rack environment.
Appendices
This section lists compatible cables, power supply specications, and compatible
backplanes. Not all compatible backplanes may be listed. Refer to our Web site
for the latest compatible backplane information.
Appendix A: Chassis Cables and Accessories
Appendix B: Power Supply Specications
Appendix C: SAS-818TQ Backplane Specications
v
Preface
Table of Contents
Preface
About This Manual ........................................................................................................iii
Chapter 1 Introduction
1-1 Overview ......................................................................................................... 1-1
1-2 Shipping List.................................................................................................... 1-1
1-3 Chassis Features ............................................................................................ 1-2
CPU................................................................................................................. 1-2
Hard Drives ..................................................................................................... 1-2
I/O Expansion slots ......................................................................................... 1-2
Peripheral Drives............................................................................................. 1-2
Other Features ................................................................................................ 1-2
1-4 Contacting Supermicro.................................................................................... 1-3
1-5 Returning Merchandise for Service................................................................. 1-4
Chapter 2 System Safety
2-1 Overview ......................................................................................................... 2-1
2-2 Warnings and Precautions .............................................................................. 2-1
2-3 Preparing for Setup......................................................................................... 2-1
2-4 Electrical Safety Precautions .......................................................................... 2-1
2-5 General Safety Precautions ............................................................................ 2-2
2-6 System Safety ................................................................................................. 2-3
Chapter 3 Chassis Components
3-1 Overview ......................................................................................................... 3-1
3-2 Components .................................................................................................... 3-1
Chassis............................................................................................................ 3-1
Backplane........................................................................................................ 3-1
Fans ................................................................................................................ 3-1
Rack Mounting ................................................................................................ 3-1
Power Supply .................................................................................................. 3-2
Air Shroud ....................................................................................................... 3-2
3-3 Where to get Replacement Components........................................................ 3-2
Chapter 4 System Interface
4-1 Overview ......................................................................................................... 4-1
4-2 Control Panel Buttons ..................................................................................... 4-2
4-3 Control Panel LEDs ........................................................................................ 4-2
4-4 Drive Carrier LEDs.......................................................................................... 4-4
SAS/SATA Drives ............................................................................................ 4-4
SC818G Chassis Manual
vi
4-5 Overheating..................................................................................................... 4-5
Chapter 5 Chassis Setup and Maintenance
5-1 Overview ......................................................................................................... 5-1
5-2 Installation Procedures.................................................................................... 5-1
Procedures for Twin Motherboard Chassis..................................................... 5-1
General Maintenance...................................................................................... 5-1
5-3 Removing the Chassis Cover ......................................................................... 5-2
5-4 Removing and Installing Hard Drives ............................................................. 5-3
5-5 Peripheral Drive Installation ............................................................................ 5-7
5-6 Motherboard Installation.................................................................................. 5-8
Permanent and Optional Standoffs................................................................. 5-8
Installing the Motherboard .............................................................................. 5-9
Expansion Card Setup .................................................................................. 5-10
Riser Card Bracket Installation with Twin Motherboards.............................. 5-13
5-7 Installing the Air Shroud................................................................................ 5-14
Checking the Air Flow ................................................................................... 5-15
5-8 System Fans ................................................................................................. 5-16
Fan Numbering in the BIOS ........................................................................ 5-16
Maintaining System Fan Trays...................................................................... 5-17
5-9 Power Supply ............................................................................................... 5-19
Power Supply Replacement.......................................................................... 5-19
Chapter 6 Rack Installation
6-1 Overview ......................................................................................................... 6-1
6-2 Unpacking the System .................................................................................... 6-1
6-3 Preparing for Setup......................................................................................... 6-1
Choosing a Setup Location............................................................................. 6-1
Rack Precautions ............................................................................................ 6-2
General Server Precautions............................................................................ 6-2
Rack Mounting Considerations ....................................................................... 6-3
Ambient Operating Temperature ................................................................ 6-3
Reduced Airow ......................................................................................... 6-3
Mechanical Loading ................................................................................... 6-3
Circuit Overloading..................................................................................... 6-3
Reliable Ground ......................................................................................... 6-3
6-4 Rack Mounting Instructions............................................................................. 6-4
vii
Preface
Identifying the Sections of the Rack Rails...................................................... 6-4
Installing the Inner Rail Extensions ................................................................ 6-5
Assembling the Outer Rails ............................................................................ 6-6
Installing the Outer Rails onto the Rack......................................................... 6-7
Installing and Removing the Chassis From the Rack .................................... 6-8
6-5 Installing the Server into a Telco Rack ........................................................... 6-9
Appendix A SC818G Chassis Cables and Accessories
Appendix B SC818G Power Supply Specications
Appendix C SAS-818TQ Backplane Specications
SC818G Chassis Manual
viii
Notes
Chapter 1
Introduction
1-1 Overview
Supermicro’s SC818G 1U chassis features a unique and highly-optimized design.
The chassis is equipped with high efciency power supply. High performance fans
provide ample optimized cooling for FB-DIMM memory modules and 4 hot-swap
drive bays offer maximum storage capacity in a 1U form factor.
1-2 Shipping List
Please visit the following link for the latest shipping lists and part numbers for your par-
ticular chassis model http://www.supermicro.com/products/chassis/1U/?chs=818
Chapter 1: Introduction
1-1
SC818G Chassis
Model CPU HDD I/O Slots Power
Supply
SC818G-1400B DP/UP 3x SAS /
SATA
4xFF + 1xLP
or
2xGPU +
1xLP
1400W
SC818G Chassis Manual
1-2
1-3 Chassis Features
The SC818G 1U high-performance chassis includes the following features:
CPU
The SC818G chassis supports a DP or UP Dual-core Xeon processor. Please refer
to the motherboard specications pages on our website for updates on supported
processors.
Hard Drives
The SC818G chassis features three drive bays for SAS/SATA drives. These drives
are hot-swappable. Once setup correctly, these drives can be removed without
powering down the server. In addition, these drives support SES2 (SAS/SATA).
I/O Expansion slots
Each SC818G chassis includes four full-height, full-length expansion slots or two
double-width high-end graphics cards (GPU), plus one low-prole expansion slot or
one double-width high-end graphics card, (with twin motherboards).
Peripheral Drives
Each SC818G chassis supports one slim DVD-ROM drive (optional) and one slim
Floppy drive (optional). These drives allow you to quickly install or save data.
Other Features
Other onboard features are included to promote system health. These include eight
cooling fans, a convenient power switch, a reset button, and LED indicators.
Inhaltsverzeichnis
Andere Supero Netzwerkspeicherserver Handbücher
Supero
Supero SC213A-R900UB Bedienungsanleitung
Supero
Supero SUPERSERVER 6027TR-H71QRF Bedienungsanleitung
Supero
Supero SC417E16-RJBOD1 Bedienungsanleitung
Supero
Supero 6047R-E1R36L Bedienungsanleitung
Supero
Supero 6047R Bedienungsanleitung
Supero
Supero 6047R-E1R24L Bedienungsanleitung
Supero
Supero 6027R-E1R12N Bedienungsanleitung
Supero
Supero SC417E16-R1400LPB Bedienungsanleitung
Supero
Supero SBB 937R-E2JB Bedienungsanleitung
Supero
Supero SC846TQ-900B Bedienungsanleitung
Beliebte Netzwerkspeicherserver Handbücher anderer Marken
HP
HP NetStorage 6000 Bedienungsanleitung
Seagate
Seagate U10 ST320423A Bedienungsanleitung
Synology
Synology RackStation RS816 Handbuch
D-Link
D-Link ShareCenter Pro DNS-1200-05 Bedienungsanleitung
Avid Technology
Avid Technology VideoRAID ST Sicherheitsleitfaden
Western Digital
Western Digital My Cloud Home Duo Bedienungsanleitung
PrimeArray
PrimeArray 4xxx Bedienungsanleitung
Buffalo
Buffalo TeraStation WSS WSH5010N6 Bedienungsanleitung
Planex
Planex MZK-NAS01SG Bedienungsanleitung
Intel
Intel SS4000-E - Entry Storage System NAS Server Bedienungsanleitung
Synology
Synology RS2212+ Bedienungsanleitung
Allnet
Allnet ALL69000 Bedienungsanleitung
