Swann Enforcer Bedienungsanleitung

Enforcer™ Bullet

Security Camera

4K Ultra HD for DVRs

Instruction Manual

Security Made Smarter

Introduction

Congratulations on the purchase of your Swann En-

forcer Bullet Security Camera.

• 4K Ultra HD video with sensor spotlight, siren

plus red & blue flashing lights

• Microphone to stream live & record audio

• True Detect™ Heat & Motion sensing for reli-

able alerts

• Powerful Night2Day™ color night vision

• Works in rain & snow all year round

• Reliable BNC cable connection

Important instructions

1. Make sure the camera is secured correctly and

stable if fastened in place.

2. Only use the supplied power adapter (12V) and

power splitter (if included).

3. Do not operate if wires and terminals are exposed.

Please note: Have a look at the camera location tips

included with your DVR to select the best location for

your camera. The camera location tips provided here

are for general purposes only.

Please read: All jurisdictions have specific laws and

regulations relating to the use of cameras. Before

using any camera for any purpose, it is the buyer’s

responsibility to be aware of all applicable laws and

regulations that prohibit or limit the use of cameras.

For instructions on how to configure your camera

for motion detection, changing image settings,

and other functions available, please consult the

manual for your DVR. Go to support.swann.com,

search for your model, then download.

Connecting the Camera2

1. Connect the video output and pow-

er input connections on the camera

to the corresponding connectors on

the supplied video & power cable.

2. Connect the supplied power split-

ter to the power input on the video &

power cable (repeat this step if mul-

tiple cameras are included).

3. Connect the supplied power

adapter to the other end of the pow-

er splitter then connect the power

adapter to a spare wall socket.

4. Connect the video output on the

video & power cable to an available

camera input on your DVR. Twist the

connection to lock it in place.

For single camera packs, connect the supplied power adapter

directly to the power input on the video & power cable.

2 3

Twist to lock

connectors

Video Input

Video & Power Cable

Connect this to your DVR

Power Splitter

connects here

Power Output

Power Adapter

connects here

Power Splitter

Power Adapter

Video & Power Cable

connects here

Connect to a spare

power outlet

8 7 6 5

4 1

VIDEO INPUTVIDEO INPUT

AUDIO

INPUT

AUDIO

INPUT

3 1

4 2

VGAVGA

LANLAN 12V12V

RS485RS485

AUDIO

OUTPUT

AUDIO

OUTPUT

Power Input

Video Output

The camera can be mounted onto a flat surface using the screws and wall plugs provided. The flat surface must

have sufficient strength to hold the camera.

→ Position the camera in the location you want to mount it, and mark the screw holes on the surface to

position the screws (mounting template included). Then, using the appropriate screws for the flat surface

you’re fixing the camera to, secure the camera in place.

→ If you’re mounting to a wooden surface, screw the camera directly to the surface.

→ If you’re mounting to a masonry surface (bricks, concrete or similar), you’ll need to use wall plugs.

Mounting the Camera3

Aiming the camera

1. Loosen both screws (use a Phillips head screwdriver) to adjust the cam-

era’s orientation. This enables you to rotate the camera left or right so no

matter what direction or orientation it’s facing, your images will be the right

way up. Tighten each screw to secure it in place.

2. Loosen the screw to tilt the camera up or down. Tighten the screw to se-

cure it in place.

3. To pan the camera left or right, loosen the screw and position it according-

ly. Tighten the screw to secure it in place.

1. Take into consideration what you want to monitor

and where you’ll get the best view of it.

2. How you’re going to connect the camera to your

monitoring system; remember that cables and con-

nections should be kept out of the weather.

3. How to keep the camera out of harm’s way. We

recommended mounting your camera at an elevated

position.

4. Place your camera as close to the area of inter-

est as practicable. The best position is from about

13ft/4m above looking slightly down, keeping in mind

the details you are looking for.

5. Although the sky looks nice when you look at the

live view from your camera, it is an unlikely direction

for an offender to approach. Make sure your camera

has minimal sky in it as the light in daylight can make

the foreground of the image darker.

6. Think about the most likely way a potential offend-

er may approach your home, use your camera to give

you the best coverage of these areas.

7. The camera’s casing is resistant to different weath-

er conditions and tampering. It would take an over-

whelming event to damage the housing.

8. The camera is weather and water-resistant but,

prolonged exposure to adverse weather conditions

such as sunlight and excessive moisture can damage

the internal components.

9. Run cables inside a wall cavity or other protected

enclosure, and ensure that all wiring and connectors

are insulated and protected from moisture.

10. Don’t put your cable near live electrical wiring. AC

electricity generates radio noise, which can interfere

with the signal from your camera.

Camera Location Tips4

M4KMQBREV1E | © Swann 2022

Helpdesk & Resources

Security Made Smarter

Visit Swann Support Center at support.swann.com. You can register

your product for dedicated customer support, download guides, find

answers to commonly asked questions, and more.

Product Registration Customer Support

Product Manuals Frequently Asked Questions

Support Community

Andere Handbücher für Enforcer

Inhaltsverzeichnis

Andere Swann Sicherheitskamera Handbücher

Swann

Swann PRO-530 Bedienungsanleitung

Swann

Swann SW-C-C510R Bedienungsanleitung

Swann

Swann NHD-815 Bedienungsanleitung

Swann

Swann CONNECT CAM 500 Bedienungsanleitung

Swann

Swann Night Hawk Bedienungsanleitung

Swann

Swann SWNVW-500CAM-EU Bedienungsanleitung

Swann

Swann Advanced ADS-120 Bedienungsanleitung

Swann

Swann SWIFI-PTCAM2 Bedienungsanleitung

Swann

Swann PRO-643 Bedienungsanleitung

Swann

Swann SWPRO-H856CAM-US Bedienungsanleitung

Swann

Swann T3 Bedienungsanleitung

Swann

Swann SW-C-HD590 Bedienungsanleitung

Swann

Swann Black & White Dome Cam Bedienungsanleitung

Swann

Swann Xtreem4K SWIFI-4KXTRM-GL Bedienungsanleitung

Swann

Swann PRO-650 Bedienungsanleitung

Swann

Swann SWO-SVC01K SoundView Bedienungsanleitung

Swann

Swann Advanced Quad Processor Bedienungsanleitung

Swann

Swann MEGA FLOOD SW-C-MFC Bedienungsanleitung

Swann

Swann PRO-T891 Bedienungsanleitung

Swann

Swann SW-D-DODBW Bedienungsanleitung

Swann

Swann DIY Security Cam SW211-DSC Bedienungsanleitung

Swann

Swann ADW-300 Bedienungsanleitung

Swann

Swann DIY Security Cam SW211-DTX Bedienungsanleitung

Swann

Swann Black Knight Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung