Swann Imitation Security Device Bedienungsanleitung
Imitation Security Device
Theft Deterrent
If this device does not work when you first plug it in,
do not take it back to the store.
Contact the Swann Helpdesk using our fast e-mail service
or call us on one of the Toll-Free
numbers shown on the back cover of this booklet.
Most problems can be quickly and easily fixed with a simple
e-mail or a quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)
Installation Guide
English
with mounting bracket
Swann Technical Support
All Countries E-mail:
UNITED STATES toll free
USA Exchange & Repairs
AUSTRALIA toll free
International
877-274-3695
(Sun-Thurs, 2pm-10.30pm PST)
800-627-2799
(Mon0Fri, 9am-1pm PST)
562-777-2551
(Mon-Fri, 9am-5pm PST)
1300 13 8324
(Mon-Fri, 9am-5.30pm Aus EST)
+61 3 8412 4610
(Mon-Fri, 9am-5.30pm Aus EST)
See http://www.worldtimeserver.com for information on different time zones
and the time in Melbourne Australia compare to your local time.
Telephone Helpdesk
Swann Communications warrants this product against defects in workmanship and material for
a period of one ( ) year from it’s original purchase date. You must present your receipt as
proof of date of purchase for warranty validation. Any unit which proves defective during the
stated period will be repaired without charge for parts or labour or replaced at the sole
discretion of Swann. The repair or replacement will be warranted for either ninety days or the
remainder of the original one year warranty period, whichever is longer. The end user is
responsible for all freight charges incurred to send the to Swann’s repair centres.
shipping from and to any country
other than the country of origin. The warranty does not cover any incidental, accidental or
consequential damages arising from the use of or the inability to use this . Any costs
associated with the fitting or removal of this product by a tradesman or other person or any
other costs associated with its use are the responsibility of the end user. This warranty applies
to the original purchaser of the only and is not transferrable to any third party.
Unauthorised end user or third party modifications to any component or evidence of misuse or
abuse of the device will render all warranties void.
1
product The
end user is responsible for all shipping costs incurred when
product
product
Help Desk / Support Details
Warranty Information
www.swannsecurity.com
4
The Imitation Security Camera is an affordable and effective theft-deterrent device. With its
realistic camera casing and camera cable, it looks like a real surveillance camera. You can easily
mount the imitation security camera indoors or outdoors to deter possible thieves and
intruders.
Your imitation security camera comes with a wall mounting plate, camera cable, camera stand (
connected to the wall mounting plate), three 1-inch (25.4mm) screws, and the three drywall
anchors.
Suggestion: An economical way to catch thieves in the act is to mix Swann Imitation cameras
with identical (real) Swann D-cams (product code: SW-P-DCAM).
Installation Instructions
2
1. Using the wall mounting plate as a template, use a pencil to mark the position of the
three screw holes on the mounting location.
2. Drill three 1-inch (25.4mm) holes in the marked positions.
3. If necessary, insert the three supplied drywall anchors into the screw holes.
4. Insert a 1-inch (25.4mm) screw through each of the three screw holes in the wall
mounting plate and into the mounting surface, then tighten the screws.
5. Insert the bolt at the top of the camera stand into the nut in the bottom of the imitation
security camera, then use a pair of pliers to firmly tighten it.
6. Turn the camera stand’s knob to tighten the swivel on the camera stand.
7. Connect the camera cable’s F connector to the plug on the back of the imitation security
camera.
Camera Cable
Drywall Anchor
Knob
Camera Stand
1-Inch (25.4mm) Screws
Wall Mounting Plate
Mounting the camera on your wall or ceiling
Mounting the camera on your wall or ceiling (continued)
3
CARE
Keep the Imitation security camera dry; if it gets wet, wipe it dry immediately. Use and store
the imitation security camera only in normal temperature environments. Handle the imitation
security camera carefully; do not drop it. Keep the imitation security camera away from dust
and dirt, and wipe it with a damp cloth occasionally to keep it looking new.
Dimensions:
Camera (HWD): 1 15/16 x 1 13/16 x 5 Inches
(50 x 46x127mm)
Wall Mounting Plate and Camera Stand (HD): 5½x23/8Inches
(140 x 60mm)
Weight (mounted): 9.2 oz (260 g)
Using the Imitation Security Camera
Specifications
Inhaltsverzeichnis
Andere Swann Sicherheitskamera Handbücher
Swann
Swann Dummy PIR Camera Bedienungsanleitung
Swann
Swann Maxi-Brite PNP-150 Bedienungsanleitung
Swann
Swann Wireless OutdoorCam SW231-WCX Bedienungsanleitung
Swann
Swann SW-D-DODBW Bedienungsanleitung
Swann
Swann SWIFI-TRACKERCAM Bedienungsanleitung
Swann
Swann Advanced SWADS-100CAM Bedienungsanleitung
Swann
Swann Dummy MaxiBrite SW215-DMX Bedienungsanleitung
Swann
Swann Advanced Quad Processor Bedienungsanleitung
Swann
Swann BulletCam SW213-BCC Bedienungsanleitung
Swann
Swann A850 Bedienungsanleitung
Swann
Swann PRO-780 Bedienungsanleitung
Swann
Swann Pro MWADCAM150514T Bedienungsanleitung
Swann
Swann PNP-150 SW212-HXB Bedienungsanleitung
Swann
Swann SHD860 Bedienungsanleitung
Swann
Swann T3 Bedienungsanleitung
Swann
Swann Night Hawk Extra Wireless Outdoor Camera Bedienungsanleitung
Swann
Swann AllSecure600 SWNVK-600SD2-EU Bedienungsanleitung
Swann
Swann Maxi-Brite PNP-150 Bedienungsanleitung
Swann
Swann PRO-536 Bedienungsanleitung
Swann
Swann SW245-SMD Bedienungsanleitung
