Swann SW351-MDA Bedienungsanleitung

MMDA170510E

SW351-MDA

www.swannsecurity.com

Operating Instructions

Magnetic Window

Alarm SW351-MDA

™

Advanced security made easy

222

Congratulations on your purchase of this stand-alone window alarm from Swann! This

alarm unit is a simple, easy to install security device which will help you to protect one door

or window from unwanted intrusion.

This magnetic window alarm unit can effectively protect a single window (or door) being

opened, though it cannot prevent a window being broken. Thus, for more complete

protection of a window, we suggest using either infrared alarm or a glass breakage alarm

as a backup to the door alarm.

This package includes:

Magnetic Window Alarm

Double-Sided Mounting Tape

Operating Instructions

• Do not expose any part of the alarm unit to any sudden shocks (such as being dropped

or struck).

• Do not install the alarm unit near devices which generate magnetic ﬁelds (such as

microwaves).

• Do not install any the alarm unit in direct sunlight.

• Use only alkaline batteries.

• All components are for indoor use only. Do not install outdoors.

• Replace the batteries in the unit every six months.

• Test the alarm periodically (every 1 - 2 months and each time you change the

batteries) to ensure it is working properly.

• This alarm system is designed to be, and acts as, a theft deterrent. This system,

like any other, cannot offer complete protection for your home or business - it

is simply an alarm system. Like all practical systems, it has limitations and it could be

disabled by a skilled intruder. We suggest that you avoid relying solely on this magnetic

alarm unit to protect your property, but use it as part of a comprehensive security

solution. You can increase your level of protection through the use of high-quality

locks, stronger doors, guards for your windows and a CCTV system and recording

devices.

IMPORTANT - Read Before Installing

Overview

Battery Compartment

Siren Magnetic

Trigger

Battery

Indicator LED

Alarm Unit

How it works:

The sensor is composed of two separate, equally important parts: the alarm unit itself, and

the trigger. The alarm unit is the larger of the two parts, and is responsible for sounding the

alarm (hence the siren). Inside the transmitter is a magnetically sensitive switch, which is

held in the OFF position by the magnetic trigger.

When the trigger is moved farther than approximately 1/2” (10-15mm) away from the door

sensor, the switch closes to the ON position and the alarm is triggered.

Arming and Disarming

The arming/disarming switch is located underneath the battery compartment, just above

the battery slot. There are only two settings, ON and OFF. Whilst ON, the alarm will sound

whenever the two parts of the alarm are separated. Whilst OFF, the alarm will not sound

under any circumstances.

• To arm the sensor, simply set this switch to ON.

• To disarm the unit or stop an alarm in progress, set the switch to OFF.

Mounting

Included are two portions of double-sided tape, one for both the alarm unit and the

magnetic trigger.

1. Remove the plastic cover from one side of the larger piece of double sided tape, and

apply the tape to the rear side of the alarm unit.

2. Remove the plastic cover from one side of the smaller piece of mounting tape, and

apply to the rear of the magnetic sensor.

3. Clean the surfaces you want to mount the alarm on using cleaning alcohol or similar.

Ensure the surfaces are completely clean and dry before proceeding.

4. Remove the plastic cover from the other side of the double-sided tape, and apply one

part of the alarm to the door/window you want to monitor, and the other part to the

frame. Ensure that when the door/window is shut, the small black arrows on the sensor

and trigger line up. They don’t need to physically touch, but they should be no more

that 1/5”(5mm) apart when the door/window is shut for the sensor to work correctly.

Replacing Batteries

1. Open the battery compartment on the front of the of the sensor.

2. Remove any old batteries.

3. Place four fresh alkaline LR44 batteries into the sensor. The correct orientation is shown

on the base of the battery compartment.

4. Use only alkaline batteries. Do not use rechargeable batteries.

5. To test the curret state of your batteries, press the TEST button, located in the battery

compartment. If the Battery Indicator LED will lights up then the batteries have enough

power to operate the alarm. If it does not light up or is dim, then you should replace

the batteries as soon as possible.

Technical Speciﬁcations

Power Requirements 4 x LR44 Button Cell Batteries (6V DC)

Siren Duration 60s (approx.)

Siren Volume >110dB

Magnetic Switch Trigger Range 10mm ~ 26mm

Magnetic

Trigger

Battery

Indicator LED

444 © Swann Communications 2010

Advanced security made easy™

Warranty Information

Helpdesk / Technical Support Details

Swann Technical Support

All Countries E-mail: tech@swannsecurity.com

Telephone Helpdesk

See http://www.worldtimeserver.com for information on time zones and the

current time in Melbourne, Australia compared to your local time.

USA toll free

1-800-627-2799

(Su, 2pm-10pm US PT)

(M-Th, 6am-10pm US PT)

(F 6am-2pm US PT)

USA Exchange & Repairs

1-800-627-2799 (Option 1)

(M-F, 9am-5pm US PT)

AUSTRALIA toll free

1300 138 324

(M 9am-5pm AUS ET)

(Tu-F 1am-5pm AUS ET)

(Sa 1am-9am AUS ET)

NEW ZEALAND toll free

0800 479 266

0203 027 0979

Swann Communications warrants this product against defects in workmanship and

material for a period of one (1) year from it’s original purchase date. You must pres-

ent your receipt as proof of date of purchase for warranty validation. Any unit which

proves defective during the stated period will be repaired without charge for parts or

labour or replaced at the sole discretion of Swann. The end user is responsible for all

freight charges incurred to send the product to Swann’s repair centres. The end user is

responsible for all shipping costs incurred when shipping from and to any country other

than the country of origin.

The warranty does not cover any incidental, accidental or consequential damages aris-

ing from the use of or the inability to use this product. Any costs associated with the

fitting or removal of this product by a tradesman or other person or any other costs

associated with its use are the responsibility of the end user. This warranty applies to

the original purchaser of the product only and is not transferable to any third party.

Unauthorized end user or third party modifications to any component or evidence of

misuse or abuse of the device will render all warranties void.

By law some countries do not allow limitations on certain exclusions in this warranty.

Where applicable by local laws, regulations and legal rights will take precedence.

Swann Communications USA Inc.

12636 Clark Street

Santa Fe Springs CA 90670

USA

Swann Communications

Unit 13, 331 Ingles Street,

Port Melbourne Vic 3207

Swann Communications LTD.

Stag Gates House

63/64 The Avenue

SO171XS

United Kingdom

Inhaltsverzeichnis

Andere Swann Sicherheitssystem Handbücher

Swann

Swann Safety Camera Kit Wireless Camera & Receiver Bedienungsanleitung

Swann

Swann 4 CCTV Cameras Security Monitoring System Bedienungsanleitung

Swann

Swann NIGHTHAWK 3-Feb Kurzanleitung

Swann

Swann PRO-580 Bedienungsanleitung

Swann

Swann NVK-460 Handbuch

Swann

Swann DVR4-5500 Bedienungsanleitung

Swann

Swann DVR16-8600 Combo Bedienungsanleitung

Swann

Swann SW344-DPS Bedienungsanleitung

Swann

Swann NVW-600CMB Bedienungsanleitung

Swann

Swann Advanced SWDVK-825504TB Bedienungsanleitung

Swann

Swann SWWHD-INTSOL Bedienungsanleitung

Swann

Swann SW276-ASL Bedienungsanleitung

Swann

Swann SW347-WAK Bedienungsanleitung

Swann

Swann SW244-SKI Bedienungsanleitung

Swann

Swann USB 2.0 DVR Guardian Bedienungsanleitung

Swann

Swann RedAlert Single Channel Digital Security... Bedienungsanleitung

Swann

Swann RL-0507A Bedienungsanleitung

Swann

Swann Alpha D03C5 Bedienungsanleitung

Swann

Swann DVR4-1100 Kurzanleitung

Swann

Swann DVR9-4200 Bedienungsanleitung

Swann

Swann Digital EagleEye ADW-400 Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Swann

Swann DVR-1580 Bedienungsanleitung

Swann

Swann Wireless OutdoorCam SW231-WDC Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung