SwissPhone DiCal-ToM Bedienungsanleitung
1
User manual
Dear customer,
congratulations to the DiCal-ToM, the new Swissphone-POCSAG-
Desktop-Receiver. It’s a state-of-art device with a 7” Touch-Screen
monitor. The ToM impresses by a combination of intuitive usage,
text visualization in different sizes and styles, MP3 sounds, printing-
, audio- and relay-output capabilities.
The parameters for the POCSAG-Receiver part will be configured by
the programming software PSWplus, the alerting & display
parameters directly via the ToM touchscreen.
This will be done usually by the device administrator via a selectable
password.
2
Directory
What’s in the box ................................................................. 3
Start-up information ............................................................ 4
Operating-Menu................................................................... 6
Reception of an alert............................................................ 7
Alert-memory management................................................. 8
Visualization of text.............................................................. 9
Visualization of older messages ......................................... 10
Deleting of Messages ......................................................... 11
Settings............................................................................... 12
Tasks for Administrators .................................................... 13
Time and date setup ...........................................................14
Configuration of basic settings............................................15
Relay switching times..........................................................16
RIC and sound combination, volume adjustment ...............17
Adding & deleting of soundfiles..........................................18
Formatting of text, adjustment of number of prints...........19
Printing of messages ...........................................................20
Programming ......................................................................21
Software-Update.................................................................22
Technical data & accessories: .............................................23
Further information ............................................................24
3
What’s in the box
•DiCal-ToM
•Rod antenna
•AC adaptor, 12 Volt/1 A
•USB-printer cable type A to type B
(to be used reversely as programming cable)
•User manual
Start-up
Connect antenna eventually printer and AC-adaptor cable to ToM. The antenna hast to be put in vertical position.
ToM starts automatically after plugging in the AC-adaptor to a power outlet, visualized by a green power-on LED at
the front. In areas with low field strength the antenna can be installed remotely via an optional 50 Ohm RF-cable (e.g.
outdor antenna).
3,5mm jack socket for audio-line-out
Speaker vents
BNC-antenna-connector
Antenne
USB-B for Prog.-cable
connector für relay-output
Connector for AC-adaptor
USB-A connector for
printer cable
4
Start-up information
During the start process the Swissphone-Logo appears on the screen, after that the start photo on the left will be shown for some
seconds, followed by the DiCal-ToM logo. In parallel the start- sound will be played.
While the start-sound cannot be interrupted, it can be changed by MP3-files and volume via the menu “RIC & Sound
combination” (page 17).
5
After the successful start- (boot-) process the screen shows „DiCal-ToM ready for use“.
The sound playback can be stopped by touching
the screen.
ToM is now prepared to receive POCSAG-
messages, depending on the proper programming
of the POCSAG-receiver device (page 21).
If you are using a low power POCSAG-test-trans-
mitter it can be necessary to hold it close to the
antenna in some cases.
According to the text settings the messages will be
visualized in 3 different font sizes (1,2,3) or
dynami-cally in full-screen mode.
After the timeout the screen-saver shows the
actual time at different positions on the screen.
The screen-saver can be set in the configuration
menu.
6
Operating-Menu
After a click on the touch-screen the “menu bar” appears at the right part of the screen.
Actual time
Scroll up for the recent message in the
message- memory
Scroll down for the oldest message in the
message-memory
Protect and unprotect selected message
Delete message
Print selected message; printing time for first
page can be up to 40s depending on printer type.
Go to menu Settings
Explanations to the messages see page 8
7
Reception of an alert
The reception of a new message will be audible by playing the sound file attached to the specific RIC. In parallel the message will
flash in red colour. The playback of the soundfile can be stopped by touching the screen and the message will be marked as ‘read’.
The message flashes still in red colour, while it is not confirmed (Unread). In the flash–mode the text-colour can be shown in
black, blue, dark-blue, green, dark-green, purple and yellow, depending on the settings. The sound-file, flash-time and text-colour
can be set RIC-dependant and individually in the “Format Text” menu.
8
Alert-memory management
The Alert-timer shows the time elapsed from the recent alert
(from 00 min. und 00 sec. to 11 h und 59 min. max).
Number of unread messages or alerts
The unread messages will be displayed in red colour, the last message will be visualized in the colour
specified. All read messages exept the last one will be displayed in grey colour.
0/ number of protected messages, 16 max. When a protected message will be selected, the background of
the storage button turns to green colour.
1/ number of all messages stored, which is actually displayed
Max. number of messages in memory is 17.
9
Visualization of text
In the left window the text is shown in full-screen mode, the right window shows the menu bar also, both in maximum character
size. The menu bar will be visible by a touch-click.
arrows indicating a message to be scrolled
Messages will be printed in maximum character size always. Multiple copies of a message can be configured.
10
Visualization of older messages
Bar graph for field strenght of the last message. One bar:
small field strength, 3 bars large field strength.
When the screen-saver is active, the Logo apears again.
While the recent message always will be displayed in red
colour and after confirmation in the selected colour, older
messages will always be shown in grey colour.
After the timeout the screen-saver shows the actual time at
different positions on the screen. The
screen-saver time can be set in the configuration menu.
Inhaltsverzeichnis
Andere SwissPhone Empfänger Handbücher
