Symbol LL 425 Bedienungsanleitung
RS 2200/3200 Series
LL 425
Quick Reference
Quick Reference
1994 - 1998 SYMBOL TECHNOLOGIES, INC.
All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability, function, or
design.
Symbol does not assume any product liability arising out of, or in connection with, the application
or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any patent
right or patent, covering or relating to any combination, system, apparatus, machine, material,
method, or process in which Symbol products might be used. An implied license only exists for
equipment, circuits, and subsystems contained in Symbol products.
Symbol is a registered trademark of Symbol Technologies, Inc. Other product names mentioned in
this manual may be trademarks or registered trademarks of their respective companies and are
hereby acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
Patents
This product is covered by one or more of the following U.S. and foreign Patents:
U.S.PatentNo.4,360,798;4,369,361; 4,387,297;4,460,120; 4,496,831;4,593,186;
4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,816,660;
4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833;
5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520
5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904;
5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792;
5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164;
5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,321,246; 5,324,924; 5,337,361;
5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081;
5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231;
5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002;
5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889;
5,552,592; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531;
5,619,028; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800;
5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,745,794; 5,754,587; 5,658,383;
D305,885; D341,584; D344,501; D359,483; D362,453; D362,435; D363,700;
D363,918; D370,478; D383,124; D391,250.
InventionNo. 55,358;62,539;69,060;69,187(Taiwan);No. 1,601,796;1,907,875;
1,955,269 (Japan).
European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/
03938; Italy 1,138,713.
rev. 7/98
3
Quick Reference
Set Up
Connect the appropriate input devices. See the LL 425
User’s
Guide
.
Connectthe appropriate interface cableassembly. See theLL425
Interface Guide
for more information.
When the host can provide sufficient power for the LL 425 and
a 5V scanner, the interface cable assembly is set up at the factory
with a Power Selection Plug installed. To power the LL425 (and
connected devices) from an external power supply, remove the
Power Selection Plug and connect a power supply. The Scanner
Port is set at the factory for 5V on the I000A model, and 12V on
the I000B. To change this setting, refer to the LL 425
User’s
Guide
.
SCANNER
MAGSTRIPE
Quick Reference
4
Programmable Parameters and Defaults
Parameter Default
Code Types All
Code Lengths
Code 39 1 to 55
Code 128 3 to 55
Codabar 2 to 55
I 2 of 5 14
D 2 of 5 14
MSI Plessey 1 to 55
Decode Options
Transmit UPC-A Check Digit Enabled
Transmit UPC-E Check Digit Enabled
MSI Plessey Check Digit 1 Digit
Decode UPC/EAN Supp. Disabled
Convert UPC-E to UPC-A Disabled
EAN Zero Extend Disabled
Buffer Code 39 Disabled
Xmit Code 39 Check Digit* Disabled
Beep After Good Decode Enabled
Beeper Volume High
UPC-A Preamble System Character
UPC-E Preamble System Character
Pause Duration 0
5
Quick Reference
Programmable Parameters and Defaults
Parameter Default
Prefix/Suffix Values 7013 (<Enter> for serial
devices
Scan Data Xmission Format Data as is
Magstripe Data Xmission Format Data as is
Laser Control
Trigger Mode Level
Laser On Time-out 1 Sec
Laser Off Time-out 1 Sec
RS-232C Single Port
Baud Rate 9600
Parity Even
Check Parity Enabled
Hardware Handshaking None
Software Handshaking None
Serial Response Time-out 2.0 Sec
Stop Bit Select Two
7 or 8-Bit ASCII Data Format 7 Bit
Intercharacter Delay 0
Transmit Code ID Character Disabled
Ignore Unknown Characters Disabled
NCR 2152 Fast Transmit Disabled
IBM 4683/4 Magstripe Comm Enabled
Quick Reference
6
Host Selection
Each Interface Cable Asembly will default the LL 425 to a given
host. Below is a list of the assemblies and their corresponding
default hosts. If your host type is not listed below, you must
selectit by scanning the appropriate bar code beginning on page
page 10.
Cable Assembly Default
IK-010X IBM 4683 Port 5B
IK-0200 IBM 3683 48-Key Calc
IK-0300 IBM 3653 Kybd Wedge
IK-040X IBM PC/AT Kybd Wedge
IK-0500 NCR 2152 Tel Kybd Wedge
IK-0600 NCR 2151 Tel Kybd Wedge
IK-0700 NCR 280 Kybd Wedge
IK-080X Standard RS-232C
IK-090X Fujitsu OCR
IK-100X NCR “F” OCIA
IK-1100 IBM 4683, Port 9B
7
Quick Reference
Customizing the Data
If you want to append an ENTER (CR) to all data, scan the five
bar codes below, starting at the top and working down. When
you do this, all previously stored ADF rules will be deleted.
ERASE ALL RULES
ANY SOURCE
SEND ALL DATA
SEND ENTER
SAVE RULE
Quick Reference
8
What Does The Beep Mean?
When you hear 1 beep (short high tone) it means data has
been decoded successfully. If any other beeps are heard,
contact the technical person in charge of scanning.
What If..
Nothing happens when you follow the operating
instructions.
• Refer to the WHAT IF... table on the next page.
• Find the symptom and check the items marked with an
“x”.
If, after performing these checks the symbol still does not scan,
contact the technical person in charge of scanning.
9
Quick Reference
What If...
If
No Power Up
No Transmit
Wrong Data
or Garbled
Scanner
Inoperative
Magstripe
Inoperative
Check
Proper Cable X X
Position of J4 X
Correct Terminal
Type Programmed?
X
Power to Host
System?
XX
Cable Connected
To Host?
XX
Power Selection
Plug Inserted?
XXX
Power Supply
Plugged In?
XXX
Quick Reference
10
Host Types
IBM PC/AT and Clones
Fujitsu 9000
IBM PS2/50/55SX/60/70/80
IBM PS2/30Wedge
IBM PC/XTWedge
and Clones
IBM 4683/4684
Port 5B
IBM 4683/4684
Port 9B
IBM 4683/4684
Port 17
Inhaltsverzeichnis
Andere Symbol Barcode-Lesegerät Handbücher
Symbol
Symbol LS 4800 Betriebsanleitung
Symbol
Symbol SYMBOL MS120XFZY Bedienungsanleitung
Symbol
Symbol CS3070 Bedienungsanleitung
Symbol
Symbol LS 7708 Installations- und Betriebshandbuch
Symbol
Symbol DS 3408 Installations- und Betriebshandbuch
Symbol
Symbol LS 1006 Installations- und Betriebshandbuch
Symbol
Symbol MicroKiosk MK1000 Installations- und Betriebshandbuch
Symbol
Symbol WSS 1000 Bedienungsanleitung
Symbol
Symbol LS 2000MX series Bedienungsanleitung
Symbol
Symbol SE955 Kurzanleitung zur Einrichtung
Symbol
Symbol LT 1806 Installations- und Betriebshandbuch
Symbol
Symbol LS1203-1AZU0100ZR Bedienungsanleitung
Symbol
Symbol LS 4071 Installations- und Betriebshandbuch
Symbol
Symbol PSM20i Bedienungsanleitung
Symbol
Symbol Series 3800 Bedienungsanleitung
Symbol
Symbol P360 Bedienungsanleitung
Symbol
Symbol LS1900 Series Bedienungsanleitung
Symbol
Symbol LS 6004 Betriebsanleitung
Symbol
Symbol LS 4208 Bedienungsanleitung
Symbol
Symbol SYMBOL DS6707 Installations- und Betriebshandbuch
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
