Tactacam REVEAL X Bedienungsanleitung
INSTRUCTION MANUAL
REVEALCELLCAM.COM
2
REVEAL APP DOWNLOAD
VISIT YOUR APP STORE TO DOWNLOAD
DOWNLOAD THE
TACTACAM REVEAL APP
3
TABLE OF CONTENTS
TABLE OF CONTENTS
INTRODUCTION
What is in the Box?
What you will need
QUICK START GUIDE
Setting Up Your Account
Downloading the App
Add Camera to the App
Sending a Test Picture
Leaving Your Camera in the Field
SETTINGS & SPECIFICATIONS
BEST PRACTICES
Proper Camera Placement
Batteries and Cellular Trail Camera Performance
TROUBLESHOOTING
Camera Sends Pictures of Nothing
Night Vision Flash Range Doesn’t Meet Expectations
Camera Stops Taking Images or Won’t Take Images
WARRANTY
3
4
4
4
6
7
7
8
10
11
12
14
14
14
15
15
15
16
17
4
INTRODUCTION
• (1) Trail Camera
• (1) Instruction Manual
• (1) Mounting Strap
• (1) Antenna
• (1) Verizon & AT&T SIM Card
• Full-size SD Card - Class 10, U3,
• 16GB-32GB
• Recommended Brands: Tactacam,
Lexar, SanDisk
(Other brands that are lower end SD cards
are incompatible with the Reveal X-Pro and
will yield unexpected results)
• (12) AA Batteries Required -
Lithium Batteries recommended
in colder temperatures
WHAT IS IN THE BOX? WHAT YOU WILL NEED
RECOMMENDED CAMERA ACCESSORIES (NOT INCLUDED)
SD Card Solar Panel
T-Post MountLockable Security Box
VIEW AND PURCHASE ALL ACCESSORIES AT REVEALCELLCAM.COM
Adjustable Camera Stake
5
INTRODUCTION
1
5
2
6
10
14
18
3
7
11
15
19
20
4
8
12
16
9
13
17
Lens
Antenna
IR LEDs
Camera Working Status Indicator
Device Status Indicator Light (Green/Blue)
SD Card Indicator (Red/Green)
SIM Slot (do not mix SIM’s with other cameras)
Power Switch (ON/SETUP/OFF)
PIR Motion Sensor
Wi-Fi Indicator Light (Blue)
Microphone
Battery Level Indicator
4G Signal Indicator
SD Card Slot
Test Button
Battery Eject Button
Reset Button
External Battery In/DC Port
USB Port
Tripod/Mount Attachment
12
13
10
14
11
9
16
15
1
2
3
4
5
6
7
8
18
19
20
17
6
SETTING UP THE CAMERA
QUICK START GUIDE
1. Install camera’s antenna.
• Note: Do not over tighten the antenna, once it is secure stop tightening to prevent
antenna port damage.
2. Install a Class 10 U3 SD card (16GB or 32GB).
• Recommended brands are: SanDisk, Lexar and Tactacam
3. Install 12 AA batteries.
• To eject the battery tray, press the EJECT button on the Reveal. When inserting
AA batteries correctly orientate + and - on the front and back of the tray.
• See battery details on page 13 under Best Practices.
Verizon and AT&T SIM Card install
Locate the (Verizon and AT&T) Sim card located in the white envelope included
in your package. Remove the desired SIM (Verizon or AT&T) from its holder and
install into the Sim slot of your camera. Cell Phone Carrier vs. Camera Carrier:
The carrier you choose (Verizon or AT&T) does not need to match your cell phone
carrier. Just make sure you choose the carrier that has be best signal coverage in
the area you will be keeping the camera.
https://www.revealcellcam.com/data-plans
When activating the camera in the APP will
need to select (Verizon or AT&T) depending on
which Sim you selected for your camera.
Note: The SIM cards are connected to your
camera so do not mix or use SIM’s from
other cameras including other Reveals.
Here is the link to our Data Plans and Coverage Map
7
QUICK START GUIDE
In your Apple or Google Play Store, download the
Tactacam Reveal app and sign in using the same
email and password you created on the website.
https://account.revealcellcam.com
DOWNLOADING THE APP
If this is your rst Reveal that you are activating,
please visit the Reveal Web Portal at
https://account.revealcellcam.com/activation
to set up your account. You can also access the
Web Portal directly from your app, by clicking
My Reveal on the account page in the app.
If you already have a Reveal account with
ACTIVE cameras, you can simply log in to
your app and add your camera following the
instructions on page 8.
SETTING UP YOUR ACCOUNT
8
QUICK START GUIDE
4
6
ADD CAMERA TO THE APP
1. Navigate to the Reveal app on your device and login
using your Reveal account credentials. Click the home
icon.
2. Click the camera icon at the top.
3. From the camera page click the (+) in the bottom right
hand corner.
4. Select Reveal X and continue.
5. Follow the in-app prompts to activate your Reveal.
Ensure the SIM selected (Verizon or AT&T) mirrors (or
is the same as) the SIM card already inserted in the
camera.
6. The app will prompt you to scan the QR code located
inside the door of the camera.
7. After your camera is activated, turn your camera to
setup, you will see the signal status indicator searching,
and then connect showing the signal strength.
1
2
3
9
QUICK START GUIDE
You can automatically change and apply the camera
settings when your phone is connected to the camera’s Wi-
Fi. This will not work unless you are next to the camera.
1. Turn Reveal X to SETUP mode.
2. When the Wi-Fi light is blinking blue, it is ready to pair
to your phone or tablet.
3. In the app go to the Account page and click Connect to
Reveal X/SK Wi-Fi.
4. Follow the in-app instructions and turn ALL slides to
the ON position. You can also manually connect in your
phone’s Wi-Fi settings, select REVEAL and enter the
password ( Reveal2021 )This Wi-Fi password is case
sensitive, no spaces.
5. See preview on screen
a. Red line on preview is point of focus
b. To send test picture, press “Test” button on camera
Also available in the app while connected to Wi-Fi:
a. Instantly apply setting changes from the app
b. Formatting SD Card
PAIRING YOUR CAMERA TO YOUR PHONE
THROUGH WI-FI
10
QUICK START GUIDE
1. Allow the camera to connect to 4G signal. The
LED signal indicator light will be constant green.
SENDING A TEST PICTURE
• After your camera is activated, you will see the
signal status indicator searching, and then connect
showing the signal strength.
• After the camera has connected, push the test
button to send a photograph.
• You will see the status light blinking as the image
is sending.
• When the test picture sends successfully, the
status light will turn green.
• If the status light turns red there may have been an
issue trying to send the test photo. This is usually
caused by signal strength or the SD Card.
From the camera page click the tool icon ( ) to make
changes to the cameras settings. Make sure to select
“Apply Settings” when done to save your changes.
Note: In cameras SETTINGS > Settings Check, Daily
will check settings every 24 hours. Instant will Receive
settings Instantly but will consume more battery.
REMOTELY CHANGE THE CAMERA SETTINGS FROM THE APP
Andere Handbücher für REVEAL X
1
Inhaltsverzeichnis
Andere Tactacam Scouting-Kamera Handbücher
