Tamron B001 Bedienungsanleitung

SP AF 10-24 mm F/3.5-4.5

Di-II LD Aspherical [IF]

(Model B001)

Thank you for purchasing the Tamron lens as the latest addition to your

photographic equipment. Di-II lens (Digitally Integrated) series are

designed for digital SLR cameras with image sensors equivalent to APS-

C size. Before using your new lens, please read the contents of this

Owner’s Manual thoroughly to familiarize yourself with your lens and the

proper techniques for creating the highest quality images possible. With

proper handling and care, your Tamron lens will give you many years of

photographing beautiful and exciting pictures.

NOMENCLATURE

1. Lens hood

2. Hood attaching alignment mark

3. Hood attached indicator

4. Filter ring

5. Hood attaching bayonet ring

6. Distance index

7. Distance scale

8. Focusing ring

9. Zooming ring

10. Focal length scale

11. Zoom index mark

12. AF/MF switch

13. Lens attachment mark

14. Lens mount/Lens mount contacts

B001

Focal Length 10-24mm

Maximum Aperture F/3.5-4.5

Angle of View 108 44'-60 20'

Lens Construction 9/12

Minimum Focus Distance 0.24m

Maximum Magnification Ratio of Shooting 1:5.13

Filter Size 77mm

Length 86.5mm

Diameter 83.2mm

Weight 400g

Hood AB001

SPECIFICATIONS

* Features and cosmetic designs of lenses listed in this owner's manual may be revised without notice.

ATTACHING AND REMOVING THE LENS

How to mount the lens

Remove the rear cap of the lens. Align the lens attachment mark on the lens barrel

with its counterpart on the camera mount and insert the lens. Rotate the lens clock-

wise (in case of Nikon lens, counter-clockwise) until it click-locks.

How to detach the lens

Pressing the lens release button on the camera down, turn the lens counter-clockwise (in case of

Nikon lens, clockwise), and lift the lens off the camera’s lens mount.

*The image circles of Di-II lenses are designed to match the digital SLR cameras using the image sensors equivalent to

APS-C (approx. 15.5x23.2mm). Do not use Di-II lenses with cameras using image sensors larger than APS-C. Using Di-

II lenses with such cameras may cause vignetting on the image.

*Some Canon cameras have index marks for attaching both EF lenses (red circle) and EF-S lenses (white square). To

attach or remove Di-II lenses, align the lens attachment mark on the lens with the index mark for EF lenses (red circle).

Do not forcibly align the lens attachment mark with the index mark for EF-S lens (white square). Doing so could result in

damage to the lens and/or camera.

*For further details, please read the instruction manual of your camera.

FOCUSING (Autofocus)

In case of Sony or Pentax, switch the focusing mode switch of the camera to Auto focusing mode (AF).

In case of a Nikon or Canon camera, switch the AF/MF swotch on the lens to AF. In case of Nikon cam-

era with the focus mode selector dial, set the focus mode to “S” or “C”, and then set the AF/MF switch

on the lens side to “AF”. Press the shutter button lightly while viewing through the camera’s viewfind-

er, the lens focuses automatically. An in-focus mark will light when lens focuses on the main subject

sharply. Press the shutter button further to photograph.

* When set on AF mode, interfering with the focusing ring may cause serious damage to the lens mechanism.

* The distance scale is marked for guidance purposes. The actual focal point may slightly differ from the distance marked

on the focal length index.

FOCUSING (Manual Focus)

In case of Sony or Pentax, switch the focusing ring mode switch of the camera to manual

focusing mode (MF). In case of a Nikon or Canon camera, switch the AF/MF switch on

the lens to MF. (Fig 4). In case of Nikon camera with the focus mode selector dial, set the

focus mode to “M”, and then set the AF/MF switch on the lens side to “MF”. Focus by manually

rotating the focusing ring while viewing through the camera’s viewfinder. The main subject in the

viewfinder will be sharp when the lens is focused correctly.

* Even when in MF mode, turning the focusing ring while pressing the shutter button halfway, the focus aid function lamp

lights up when the picture is in focus.

* At infinity, make sure the image in the viewfinder appears sharp. The infinity position on B001 is made with certain

allowances to insure proper focus under a variety of conditions.

* For further details, please read the instruction manual of your camera.

ZOOMING

Rotate the zooming ring of the lens while viewing through the camera’s viewfinder and

compose your image at the chosen focal length.

LENS APERTURE AND AE MODE

Please follow the instruction manual of your camera.

LENS HOOD

A bayonet-type lens hood is provided as standard equipment. We recommend shooting

with the hood attached whenever possible as the lens hood eliminates stray light which

is harmful to the picture. However, please be aware of the “PRECAUTIONS IN

SHOOTING” when your camera is equipped with a built-in-flash.

Attaching the Lens Hood

Align the hood attaching alignment mark (2) on the hood with the corresponding

hood attaching bayonet ring (5) (or the top of the index line of the distance scale)

on the lens. Press the hood lightly onto the hood attaching bayonet ring and then

rotate it clockwise to secure. The lens hood will be securely held as the mark

“TAMRON O” comes to the top.

*Pay particular attention to align the hood attaching indexes when using zoom lenses

including wide-angle (ex: 35mm or wider) settings. Improper attachment of a hood for

wide-angle zoom lenses may cause large shadowed areas in your pictures.

Stowing the Lens Hood on the Lens (Fig 7)

Reverse the lens hood. Point the lens toward the opening, then align the hood attach-

ment mark on the lens with the “TAMRON O” alignment on the hood.

Turn the hood clockwise until the alignment mark is at the top to set it. (Fig 7)

PRECAUTIONS IN SHOOTING

-The optical design for Di-II takes into consideration the various features of digital

single reflex cameras. However, due to the configuration of the digital single reflex

cameras, even when the auto focus accuracy is within specifications, the focal point

may be a little forward or behind the optimum point when shooting with auto focus under

some conditions.

-When photographing near the minimum focusing distance it is advisable to shoot at

higher f-numbers to obtain sharper image quality.

-The image circles of Di-II lenses are designed to match the digital SLR camera using

the image sensors equivalent to APS-C (approx. 15.5 x 23.2mm). Do not use Di-II

lenses with cameras using image sensors larger than APS-C. Using Di-II lenses with

such cameras may cause vignetting on the image.

-(B001) emply an internal focusing (IF) system. Because of the characteristics of this

optical design, the angles of view at distances other than infinity are wider than that of

the lenses applying an ordinary focusing system.

-When the built-in-flash on the camera is used, adverse photographic phenomena such

as corner illumination fall-off or vignetting at the bottom part of the image may be

observed, especially in wide-angle ranges. This is due to the inherent limitation of the

coverage of the built-in-flash, and/or the relative position of the flash to the edge of the

lens barrel which causes shadows on the image. It is strongly recommended to use a

suitable separate flash unit provided by the camera manufacturer for all flash

photography. For further details, please read the “built-in-flash” article on the

instruction manual of your camera.

-The use of teleconverters is not recommended due to the optical performance

of the lens.

-When using the lens in the telephoto focal range, please be careful with the camera

shake. Effective way to avoid the camera shake is using an ISO setting of higher

numbers. Using a tripod is also effective.

-When set on AF mode, interfering with the focusing ting may cause serious damage to

the lens mechanism.

-Certain camera models may indicate the maximum and minimum aperture values of

the lens appropriate numbers. This is inherent to the design of the camera and not an

indication of error.

-When using a special filter such as a PL filter, use low profile filters. The thick rim of a

normal filter may cause vignetting.

TO ENSURE LONG-TERM SATISFACTION

-Avoid touching the glass element surface. Use photographic lens cloths or blowers to

remove dust from the lens element surface. When not using the lens, always place a

lens cap on it for protection.

-Use a lens cleaning tissue or lint cloth with a drop of cleaning solution to remove

fingerprints or dirt on the glass lens surface with a rotary motion from the center to the

edge. Use a silicone cloth to clean your lens barrel only.

-Mildew is an enemy of your lens. Clean the lens after shooting near water or in any

humid place. Store your lens in a clean, cool, dry place. When storing the lens in a lens

case, store it with commercially available drying agents such as silicagel, and change

the agent occasionally. If you find mildew on your lens, consult an authorized repair

shop or nearby photographic store.

-Do not touch the lens-camera interface contacts since dust, dirt and/or stains may

cause a contact failure between the lens and camera.

-When using your equipment [camera(s) and lens(es)] in an environment where the

temperature changes from one extreme to the other, make sure to put your equipment

temporarily in a case or plastic bag for a length of time in order for the equipment to go

through a gradual temperature shift. This will reduce potential equipment trouble.

Inhaltsverzeichnis

Andere Tamron Kameraobjektiv Handbücher

Tamron

Tamron A17 Bedienungsanleitung

Tamron

Tamron A020 Bedienungsanleitung

Tamron

Tamron A025 Bedienungsanleitung

Tamron

Tamron A071 Bedienungsanleitung

Tamron

Tamron A09 Bedienungsanleitung

Tamron

Tamron A009 Bedienungsanleitung

Tamron

Tamron A035 Bedienungsanleitung

Tamron

Tamron 672D Bedienungsanleitung

Tamron

Tamron F050 Bedienungsanleitung

Tamron

Tamron A09 Bedienungsanleitung

Tamron

Tamron 360EM Bedienungsanleitung

Tamron

Tamron SP 15-30mm F/2.8 Bedienungsanleitung

Tamron

Tamron SP 70-200mm F/2.8 Di Bedienungsanleitung

Tamron

Tamron A007 Bedienungsanleitung

Tamron

Tamron A18 Bedienungsanleitung

Tamron

Tamron 177D Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung

Tamron

Tamron A037 Bedienungsanleitung

Tamron

Tamron B011 Bedienungsanleitung

Tamron

Tamron SP90mm F/2.8 Di MACRO 1:1 VC USD Bedienungsanleitung

Tamron

Tamron A17 Bedienungsanleitung

Tamron

Tamron A031 Bedienungsanleitung

Tamron

Tamron AF55-200mm F/4-5.6 Di II LD Macro Bedienungsanleitung

Tamron

Tamron A10 Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Canon

Canon FD 35 - 70 mm Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Canon

Canon FD Lens Handbuch

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Sinar

Sinar Rolleiflex 6008 AF Bedienungsanleitung

Rokinon

Rokinon SP 85mm F1.2 Bedienungsanleitung

Nikon

Nikon AF-S Zoom-Nikkor 17-35mm f/2.8D IF-ED Bedienungsanleitung

Samsung

Samsung Samsung 18-55mm Bedienungsanleitung

FujiFilm

FujiFilm XF56mm F1.2 R APD Bedienungsanleitung