Tanco S100 A Bedienungsanleitung

TRACTOR CONNECTION

1. Hydraulics

Red pipe > Supply (35-40lpm)

Blue pipe > Return (Free flow return!!)

2. Electrics

A. Connect 12V supply to 3pin plug

B. Connect wrapper harness to controller

ENTERING THE WORKING POSITION

1. Remove the wrap arm transport lock.

2. Position the safety arms into the working

position by removing the retaining pin.

3. Adjust the load arm stop pin to allow

clearance between the top of the bale at the

rotating arm.

4. Install the roll of film and attach the film to

the Cut & Start.

The quick reference guide is not a substitute for the Operators Manual!

Please refer to Operators Manual for more detailed information

S100 A QUICK REFERENCE GUIDE

OPERATION

1. Activate the “Rollers out” (a) function

to open the rollers

2. Drive into the bale until the bale

contacts the bale support roller.

3. Activate “Rollers in” (b) to load the

bale.

4. Once the bale is loaded, pressing

“Auto start” (c) will commence

wrapping.

5. When wrapping is complete, press

“Rollers out” (a) to offload the bale.

Note: “Rollers in” & “Rollers out”

functions can be operated by “one touch”

meaning that the operator does not need

to keep the button pressed. To activate

“one touch” increase “Rollers in” & “Roller

out” time in the Operator Menu.

Using the End Tip

1. The End Tip must first be activated by

turning a hydraulic tap which is located

next to the hydraulic valve block

assembly.

2. When wrapping is complete, press the

“Rollers out” button (a). The End Tip

will first extend before the rollers

move out to unload the bale.

Auto mode (A)

EXPERT CONTROLLER OPERATION

OPTIONAL RF REMOTE OPERATION

The RF (Radio Frequency) remote is required if you wish to operate the

S100A wrapper statically.

Auto Start wrap

Close Cut & Start

Offload the bale

Emergency Stop

Rotate wrap arms

in reverse

Rotate wrap

arms forward

Load bale / add

extra wrap

Open Cut & Start

RF Receiver

The red button on the

rear of the remote must

be pressed while

pressing any other

button (except “STOP”).

- Current No. of wraps

- Target No. of wraps

- Wrapping speed (RPM)

- Bale total

- Grand total No. of bales

- Mode: Manual /Auto

Pause wrapping

Open cutter

Fast wrap arm rotate /

Resume wrapping

Pause bale rotation (during

wrapping)

Rollers in

Start Auto wrap cycle

Select Manual or Auto

- Set No. of wraps

- Change / reset bale sub-total

- Access Operator Menu

- Access Technician Menu

Reverse wrap arm

Slow wrap arm rotate

Close cutter

Add extra wrap

Rollers out

Power on/off /

Emergency Stop

ENTERING THE TRANSPORT POSITION

1. Fully close the loading rollers.

2. Rotate the wrap arm until it is behind

the Cut & Start.

3. Insert the wrap arm transport lock.

4. Lock the safety arm into the transport

position.

OPTIONAL HANDHELD REMOTE

The operator can activate the main wrapper functions through the handheld

remote. This means that the operator can hold the remote in their hand while

operating the tractor.

Auto mode

Auto start wrap

Auto mode

Rollers out Auto mode

Rollers in

Andere Tanco Landwirtschaftliche Geräte Handbücher

Tanco

Tanco Autowrap 1320 Service-Handbuch

Tanco

Tanco 1300 Series Service-Handbuch

Tanco

Tanco 580A Bedienungsanleitung

Tanco

Tanco E100 SA Service-Handbuch

Tanco

Tanco 404 S Service-Handbuch

Tanco

Tanco A Series Service-Handbuch

Tanco

Tanco 1400 Autowrap Service-Handbuch

Tanco

Tanco D80 Service-Handbuch

Tanco

Tanco i73 Service-Handbuch

Tanco

Tanco A200 EH Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung