TANDBERG Viking FS-1600 Gebrauchsanweisung
TANDBERG
VIKING FS-1600
NAS APPLIANCE
Hardware User Manual
20 Bendemeer Road, #04-05
Cyberhub, Singapore 339914
Phone + 65 6396 0786
Telefax + 65 6396 0787
© Tandberg Data Asia
Part No.
January 2008
TANDBERG DATA ASIA
65 82 B7 - 01
Related publications available from Tandberg Data Asia:
Part No. Title
6582X2 Tandberg Viking Series Storage Server
Administration Manual
This publication may describe designs for which patents are granted or pen-
ding. By publishing this information, Tandberg Data Asia conveys no license
under any patent or any other rights.
Every effort has been made to avoid errors in text and diagrams. However,
Tandberg Data Asia assumes no responsibility for any errors which may ap-
pear in this publication.
It is the policy of Tandberg Data Asia to improve products as new techniques
and components become available. Tandberg Data Asia therefore reserves
the right to change specifications at any time.
We would appreciate any comments on this publication.
_____________________________________________________________
i
Table of Contents
Table of Contents i
1. Overview 1-1
1.1. Package Contents 1-1
1.2. Features of Viking FS-1600 Series NAS Appliance 1-2
1.3. Front Panel 1-4
1.4. Front Panel LED Indicators 1-5
1.5. Rear Panel 1-6
1.6. Rear Panel LED Indicators (LAN) 1-7
1.7. Storage 1-7
1.7.1. DVD-ROM Drive 1-7
1.7.2. Hard Disk Drives 1-8
2. Setting Up 2-1
2.1. Requirements 2-1
2.1.1. Ambient Temperature 2-1
2.1.2. Height and Weight 2-1
2.1.3. Rack Mounting 2-2
2.1.4. Power Source 2-2
2.1.5. Circuit Overloading 2-2
2.1.6. Reliable Grounding 2-2
2.1.7. Electrical Shock 2-2
2.1.8. Battery Precaution 2-2
2.1.9. Sufficient Ventilation 2-3
2.2. Accessing the HDD Tray & Installing Hard Drives 2-3
2.3 Rack Installation: Content of Accessory Kit 2-5
2.4. Rack Mount Installation 2-6
2.4. Connecting Cables 2-9
2.5. Turning ON the Viking FS-1600 Series NAS Appliance 2-10
2.6. Troubleshooting 2-10
2.7. Turning OFF the Viking FS-1600 Series NAS Appliance 2-12
2.7.1. Using Microsoft®Windows®2-12
3. RAID Configuration 3-1
3.1. Hardware RAID Layout 3-1
3.1.1. System Volume (SV) 3-3
3.1.2. Data Volume (DV) 3-3
3.2. RAID Volume Calculation 3-3
4. Customizing the Viking FS-1600 Series NAS Appliance 4-1
4.1. Preventing Static Electricity Discharge 4-1
4.2. Expanding Connectivity 4-1
4.2.1. Built-in Networking 4-2
4.2.2. USB Connection 4-2
4.3. Upgrading Storage Capacity 4-2
4.2.2. Removing/Installing Hot-Swap Hard Drive 4-2
5. System Management 5-1
5.1. Windows Installer 5-1
5.2. RAID Management 5-3
5.2.1. Configure and Creation of RAID Volumes 5-3
5.2.2. Changing RAID Level and Capacity Size 5-4
Tandberg Data Table of Content
_____________________________________________________________
ii
5.3. System Recovery 5-4
6. Troubleshooting 6-1
6.1. Before Calling Tandberg Data Technical Support 6-1
6.2. Safety Guidelines 6-2
6.3. Troubleshooting Steps 6-2
7. Glossary 7-i
_____________________________________________________________
1-1 Tandberg Viking FS-1600 Series NAS Hardware User Manual
1. Overview
1.1. Package Contents
The Tandberg Viking FS-1600 Series NAS Appliance comes with the
following items:
•Viking FS-1600 Series NAS Appliance (1)
•AC power cord (1)
•Rackmount kit (1 set)
•OS Recovery DVDROM / Documentation CDROM (2 discs)
Notes
If any of the items above are damaged of missing, contact your dealer immediately.
Save the packaging box and materials for future transportation use.
Tandberg Data Overview
_____________________________________________________________
1-2 Tandberg Viking FS-1600 Series NAS Hardware User Manual
1.2. Features of Viking FS-1600 Series NAS
Appliance
The Viking FS-1600 Series Network Attached Storage appliance is a
powerful rack-mountable system that offers a new standard for flexible
management and monitoring networked attached storage by the network
administrators. The hardware features include the followings:
•Processor:
oViking FS-1600 uses dual 771-pin LGA Sockets that
supports 2 x 64-bit Dual-Core Intel®Xeon®1.60 GHz
processor with 1066 MHz FSB and 4MB L2 Cache (5110)
oFor Viking FS-1610 uses dual 771-pin LGA Sockets that
supports 1 x 64-bit Quad-Core Intel®Xeon®2.00 GHz
processor with 1333 MHz FSB and 12MB L2 Cache (E5405)
•Intel 5000V (Blackford VS) chipset
•2 x Intel® (ESB2/Gilgal) 82563EB Gigabit Ethernet Controller which
supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
with Intel® I/OAT for fast, scaleable, and reliable networking
•Memory:
o6 x 240-pin DIMM socket that accept a maximum memory
capacity of 16GB 667 / 533 MHz DDR2 ECC FB SDRAM
modules (Memory modules must be populated in pairs)
oDefault RAM configuration for FS-1600 is 1GB and FS-1610
is 2GB
•Expansion slots:
o1 x (x8) PCI-e slot
o1 x (x4) PCI-e slot (using x8 slot)
o2 x 64-bit / 100 MHz PCI-X (3.3V) slot
o1 x 32-bit / 33 MHz PCI (3.3V) slot
•RAID:
oFS-1600 uses Areca ARC-1160 Serial-ATA II RAID
controller with 256MB RAID cache which supports RAID
level 0, 1, 0+1, 3, 5 and 6 (consume one PCI-X slot)
oFS-1610 uses Areca ARC-1261ML Serial-ATA RAID
controller with 256MB RAID cache which supports RAID
level 0, 1, 0+1, 3, 5 and 6 (consume one x8 PCI-e slot)
•Storage support for:
oUp to 16 x hot-swap Serial-ATA II hard-drive bays
oUp to 16 x hard-drive with RAID configuration
•Front control panel
oPower button
oReset button
o1 x Fast UART 16550 serial port
o2 x USB 2.0 port
Tandberg Data Overview
_____________________________________________________________
1-3 Tandberg Viking FS-1600 Series NAS Hardware User Manual
•Rear panel connectors
o1 x PS/2 keyboard port
o1 x PS/2 mouse port
o1 x Fast UART 16550 serial port
o1 x HD-68 Ultra320 SCSI port
o1 x VGA port
o1 x ECP/EEP parallel port
o2 x RJ45 LAN port
o2 x USB 2.0 port
•2 x Redundant Power Supply Unit (Total 800W)
The Tandberg Viking FS-1600 Series NAS appliance is fully compatible with
Microsoft Windows Storage Server 2003.
Tandberg Data Overview
_____________________________________________________________
1-4 Tandberg Viking FS-1600 Series NAS Hardware User Manual
1.3. Front Panel
1234567
1. Power button
Button that turns the FS-1600 Series on or off.
2. Reset button
Button that reset the FS-1600 Series.
3. Power LED
Lights up green when power is on.
4. HDD Activity LED
Indicates HDD activity by flashing LED.
5. LAN Access LED indicator
Indicates LAN status and activity of LAN1 and LAN2 Ethernet
controllers.
6. Over temperature LED indicator
Indicates if FS-1600 Series is overheated (continuously on) or fan
failure (flashing).
Tandberg Data Overview
_____________________________________________________________
1-5 Tandberg Viking FS-1600 Series NAS Hardware User Manual
7. Power Supply Unit Failure LED
Indicates if one or more power supply units have failed.
1.4. Front Panel LED Indicators
LED Colour State Meaning
Power Green On FS-1600 Series NAS is on.
Off FS-1600 Series NAS is off.
HDD Green Off No hard-drive activity or no hard-drive is
connected or.
Blink Hard-drive activity.
HDD (Fault) Amber On Hard-drive is faulty.
Off Hard-drive is in normal state.
LAN Green On Network link is established.
Blink Network link is established and LAN
activity.
Off No link is established and cable could be
faulty.
Over Temp Red On FS-1600 Series is overheated.
Off FS-1600 Series is in normal condition.
Blink One or more the system fans failure.
Power Fault Red On One or more PSU have failed.
Off All PSU is in normal conditions.
Tandberg Data Overview
_____________________________________________________________
1-6 Tandberg Viking FS-1600 Series NAS Hardware User Manual
1.5. Rear Panel
1
2
34 5 6 7 8 9 10
1. Fan
Cools the FS-1600 Series. Blocking the ventilation may result in
overheating.
2. Power supply connector
Plug the power cord to into this connector.
3. HD-68 pin Ultra320 SCSI connector
Connector for external SCSI device.
4. PS/2 mouse connector
Connector for PS/2 mouse device.
5. PS/2 keyboard connector
Connector for PS/2 keyboard device.
6. USB connectors
Connectors for USB devices.
7. RS232 serial connector
Connector for UPS for other serial port device.
8. Parallel connector
Connector for printing device.
9. VGA console connector
Connector for a console monitor.
10. LAN connectors (LAN1 & LAN2)
RJ45 connectors for 10/100/1000 Base-T/X networks.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Beliebte Netzwerkspeicherserver Handbücher anderer Marken
HP
HP NetStorage 6000 Bedienungsanleitung
Seagate
Seagate U10 ST320423A Bedienungsanleitung
Synology
Synology RackStation RS816 Handbuch
D-Link
D-Link ShareCenter Pro DNS-1200-05 Bedienungsanleitung
Avid Technology
Avid Technology VideoRAID ST Sicherheitsleitfaden
Western Digital
Western Digital My Cloud Home Duo Bedienungsanleitung
PrimeArray
PrimeArray 4xxx Bedienungsanleitung
Buffalo
Buffalo TeraStation WSS WSH5010N6 Bedienungsanleitung
Planex
Planex MZK-NAS01SG Bedienungsanleitung
Intel
Intel SS4000-E - Entry Storage System NAS Server Bedienungsanleitung
Synology
Synology RS2212+ Bedienungsanleitung
Allnet
Allnet ALL69000 Bedienungsanleitung
