Tar River PRZ-5500 Bedienungsanleitung
Rev. 04/23
4 Rotor Tiller
PRZ-5500
Operator’s Manual
2
4 Rotor Tedder PRZ-5500
Page left blank intentionally
3
4 Rotor Tedder PRZ-5500
BELCO Resources Equipment guarantees the efficient operation of the machine, providing it is being used in
accordance with the technical and operating conditions specified in this USER MANUAL.
Any faults revealed during the warranty period will be repaired by the Warranty Service. Expiration date of the
warranty period is specified in the WARRANTY CARD.
Machine parts and components, which are subject to wear in normal operating conditions, are not covered by
the warranty, regardless of the warranty period.
Warranty Service covers only instances such as: mechanical damages not caused by a fault of the user, produc-
tion defects, etc.
The group of elements includes, among others, the following parts/components:
• rotor spring tines.
In the event of damages resulting from:
• mechanical destruction caused by a fault of the user or a traffic accident,
• improper use, adjustment, and maintenance, use of the machine for a purpose other than intended,
• use of a machine, that was damaged,
• repairs conducted by unauthorized persons, improper repairs,
• arbitrary changes and modifications of a machine structure, the user’s rights to Warranty Service may be-
come invalid.
The user is obliged to immediately report any noticed damages of paint coat or spots of corrosion, and order
repairs regardless of whether the damages are covered by the Warranty. Warranty conditions are specified in
detail in the WARRANTY CARD attached to the purchased machine.
ATTENTION!
You must demand from the dealer to properly fill out the Warranty Card. For example, if the
date of sale or the stamp of a dealer are missing, you risk that your complaints will not be
considered valid.
4
4 Rotor Tedder PRZ-5500
TO THE DEALER:
Assembly and proper installation of this product is the responsibility of the Tar River dealer. Read manual in-
structions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the
Owner’s/Operator’s Manual are completed before releasing equipment to the owner.
TO THE OWNER:
Read this manual before operating your Tar River equipment. The information presented will prepare you to
do a better and safer job. Keep this manual handy for ready reference. Require all operators to read this manual
carefully and become acquainted with all the adjustment and operating procedures before attempting to oper-
ate. Replacement manuals can be obtained from your selling dealer. The equipment you have purchased has
been carefully engineered and manufactured to provide dependable and satisfactory use. Like all mechanical
products, it will require cleaning and upkeep. Lubricate the unit as specified. Observe all safety information in
this manual and safety decals on the equipment. For service, your authorized Tar River dealer has trained me-
chanics, genuine Tar River service parts, and the necessary tools and equipment to handle all your needs. Use
only genuine Tar River service parts. Substitute parts will void the warranty and may not meet standards re-
quired for safe and satisfactory operation.
Record your implement model and serial number in the space provide below. Your dealer will need this infor-
mation to give you prompt, efficient service.
Model Number: ______________________________________
Serial Number: _______________________________________
Date Purchased: ______________________________________
5
4 Rotor Tedder PRZ-5500
Table of Contents
Introduction …………………………………………………………………………………………….. 5
Technical Specifications ……………………………………………………………………………….. 5
Safety …………………………………………………………………………………………………… 6
Safety Signal Words ……………………………………………………………………………………. 6
General Safety Guidelines ……………………………………………………………………………… 7
Safety Decal Care ………………………………………………………………………………………. 7
Before Operation ……………………………………………………………………………………….. 8
During Operation ……………………………………………………………………………………….. 9
Highway And Transport Operations …………………………………………………………………… 10
Assembly ……………………………………………………………………………………………….. 12-14
Operating Instructions…………………………………………………………………………………... 15-18
Before Beginning ………………………………………………………………………………………. 15
Lubrication and Maintenance …………………………………………………………………………... 19
Changing Discs ………………………………………………………………………………………… 19
Seed Charts …………………………………………………………………………………………….. 20
Torque Specifications ………………………………………………………………………………….. 21
Parts Breakdown ……………………………………………………………………………………….. 23-33
Decals …………………………………………………………………………………………………... 34-36
Warranty ………………………………………………………………………………………………... 37
6
4 Rotor Tedder PRZ-5500
Introduction
Thank you for purchasing your 4 Rotor Tedder. The 4 Rotor Tedder built heavy in all the right places. This
machine is designed to withstand the rigors of high volume hay production.
The PRZ-5500 is equipped with large 18” tires to give the tedder greater floatation across uneven terrain. Ad-
justable angling allows for boundary tedding. Thick walled tubular tine arms hold up long after the flat bar
style ones would have bent. Hydraulic tilt and fold come standard.
Technical Specifications
PRZ-5500
Weight 1594 lbs.
Req. HP Minimum 35 HP
Working width 18’ 1”
Lift Hydraulic
Tilt Hydraulic
Rotor style U-joint
Rotors 4 / 24
Tires 18 x 8.5 / 8
• 18’ working width • Hydraulic tilt
• Overrunning ratchet clutch PTO • Heavy walled tubular arms
• High floatation tires • Integrated locking collars and hex shaft drive units
• Heavy built, rectangular tube frame • Double plated rotor supports
• Wheel fenders on inside tires • Adjustable wheel yoke, swivel and tilt
• Road trans tire
• Hydraulic lift
7
4 Rotor Tedder PRZ-5500
Introduction
1. Introduction
Before the rst use of the machine, you must thoroughly read and understand this instrucon manual, and follow all
the instrucons contained herein.
This instruction manual contains a description of hazards that can occur in case of non-compliance with safety
rules during operation and maintenance of the machine. The instruction manual specifies precautionary
measures to be taken to minimize or avoid risks.
This manual also contains principles of correct use of the machine and specifies the maintenance operations to
be performed.
If you do not understand any information contained herein, please contact the manufacturer directly.
ATTENTION!
Read the instruction manual before use.
ATTENTION!
This warning symbol alerts about a hazard. The warning symbol indicates an important hazard
information provided in the instruction manual. Please read the information, follow the in-
structions and exercise particular caution.
8
4 Rotor Tedder PRZ-5500
Introduction
2. Machine identification
Each tedder has its rating plate, containing the most important identification data. The rating plate is located on
the machine in such place, that it is easy to find and to read.
Manufacturer’s rating plate includes:
The full name of the manufacturer.
The serial number of the tedder.
The model number of the tedder.
Fig. 1 Rating plate
9
4 Rotor Tedder PRZ-5500
Introduction
3. Rules of safe operation
3.1. User safety
The tedder can only be used by adults, who are properly qualified and have learned its operation and have
read this User Manual. The tedders should be operated with all necessary precautions, in particular:
• In addition to this instruction manual, also observe the general rules of health and safety at work.
• Observe warning symbols placed on the machine.
• It is strictly forbidden, to operate the machine by persons under the influence of alcohol or other in-
toxicants.
• Never allow the vehicle towing the tedder to be driven by a person other than the shredder operator,
and under no circumstances allow any other persons to be on the vehicle, or by the machine, during
its operation.
• The tedder may be operated by a person with the proper authorization to drive the vehicle to which it is
attached, in accordance with the manufacturer's instructions.
• The operating position of the operator, while working with the tedder is the cabin of the vehicle to
which the machine is attached.
• Please note, that there are many elements of the machine that may cause an injury (sharp edges, pro-
truding parts, etc.). While using the equipment, exercise particular caution when moving close to the
above-mentioned critical spots and obligatorily use the following personal protection equipment:
- protective clothing,
- protective gloves,
- safety shoes.
• It is forbidden to carry persons or objects on the machine.
• It is forbidden that the machine should be operated by persons who are not familiarized with the in-
struction manual.
• The person operating the tedder should be provided with a first-aid kit containing measures
for first aid, along with instructions regarding their use.
• When driving a vehicle with the Tedder attached, but not working machine, ensure the safe dis-
tance of spring tines from the ground (14-18cm).
• Before starting work, the tedder must be set in the transport position.
• Take special care when driving on public roads and comply with the applicable road traffic regula-
tions.
• The user is obliged to ensure the visibility of a machine during its transportation: use the reflective
markings and warning signs - may be included as an option.
10
4 Rotor Tedder PRZ-5500
Introduction
• Adjust the transport speed to the condition of the road. The speed should not exceed 50km/h.
• Do not leave the vehicle with the machine on a hillside or other sloping surfaces, without securing
the vehicle from rolling down. Put wedges under the wheels of the vehicle.
• The tedder must be adjusted to working height, during its attachment to the vehicle.
• Any preparations, fitting, dismantling or adjustment can be performed only after the drive has been
switched off, the engine stopped, the vehicle immobilized and when all the moving parts of the ma-
chine have stopped.
• After first hour of operation, check the status of all separable connections, including screws.
• The tedder should be kept on a flat, level, paved surface, out of the reach of strangers and animals. Use
the support foot for stabilizing the tedder.
• Exercise caution during the hooking up and unhooking the tedder. Pay particular attention to the integ-
rity of the connections and pins through which the tedder is connected with the tractor.
• Before using you must check the condition of machine and of the vehicle it is attached to. The vehicle
and the tedder unit must be in good technical condition. Worn or damaged parts must be replaced
immediately.
• The tedder must be equipped with all the safety guards (provided by the manufacturer), preventing
access to any moving parts. The guards must be complete and fully operational.
• It is not allowed to work with the tedder without safety guards. It is not allowed to work with dam-
aged safety guards.
• It is not allowed to lift the tedder arms when the drive is switched on and rotors are rotating.
• It is not allowed to control the lever of hydraulic lift from outside of the tractor.
• Before beginning to work with the machine, you should familiarize yourself with the way it oper-
ates, occupational safety rules and recommendations for maintenance and adjustment procedures, by
reading this User Manual.
• The instruction manual should be kept on the machine. When letting the machine to other user, you
must ensure that it is in good mechanical condition, and that the instruction manual is also handed
over.
• Do not attach additional transport means to the machine.
• During commissioning, check the machine functions and make the initial adjustments.
• Due to the natural wear and tear the state and completeness of machine spring tines should be
controlled, using the recommendations described in the chapter. 7 Operation and maintenance”
and 6.6.5 Tedder tines operation”.
Andere Handbücher für PRZ-5500
1
Inhaltsverzeichnis
Andere Tar River Landwirtschaftliche Geräte Handbücher
Tar River
Tar River Square Back Rotary Cutter Bedienungsanleitung
Tar River
Tar River EMF Leitfaden
Tar River
Tar River TBR-210 Bedienungsanleitung
Tar River
Tar River Econo-Wrap EW-450A Bedienungsanleitung
Tar River
Tar River Greenscape 750 Bedienungsanleitung
Tar River
Tar River SSP-250 Bedienungsanleitung
Tar River
Tar River SAYA-507 Bedienungsanleitung
Tar River
Tar River SLC Series Bedienungsanleitung
Tar River
Tar River SAYA-505 Bedienungsanleitung
