Tara Laser 2 Bedienungsanleitung

USER GUIDE

PLEASE READ ALL INSTRUCTIONS CAREFULLY

The Tara Laser 2 automated pool measuring system gives you precise accurate measurements quickly

and with less setup. Unlike tradional methods of measuring pools, the Tara Laser 2 is fast, reliable and

incredibly accurate. The system is simple and eecve. Whether you are an experienced pool professional

or a novice, you can gather all the measurements you need in a maer of minutes. The Tara Laser 2 delivers

the most detailed measurements possible. Eliminate the hassle of traveling back and forth to the job site for

more measurements. A quick scan by the Tara Laser, will provide Tara Mfg with all the informaon we need

to create a liner that ts like a glove.

360˚ RadiusAutomated Range - 50 metersBluetooth iOS Compable

50m

laser ii

TARA

SAFE OPERATING PROCEDURES

1. DO NOT look into the laser beam and DO NOT unnecessarily aim at other persons.

2. DO NOT open the unit. Doing so, will void the warranty and requires the unit to be returned to Tara Manufacturing for

recalibraon.

3. No user serviceable parts inside.

4. As this is a precision instrument, it should be transported and carried in its case and handled with care at all mes.

5. DO NOT immerse the device in water or other uids.

6. Wipe o dirt and smudges with a damp ssue or so, clean, lint-free coon cloth.

7. DO NOT use aggressive cleaning agents or soluons.

8. Whenever possible, store the device in a dry, shady locaon.

USE

1. Measuring Condions

(a) The opmal measuring condion is in the morning or evening and if the walls

of the pool are in shadow.

(b) Measuring errors can occur when the target surface reects too intensely

(e.g. a mirror) or insuciently (e.g. black fabric), or the ambient light is too bright.

2. Device Preparaon

(a) Charge Laser before use.

(b) Aach Laser to tripod and place near the center of the pool.

walls of the pool. Ex.1

(d) Verify all sides of the pool wall are visible from the laser locaon.

(e) Using a bubble level on the top of the laser unit adjust the tripod so that the laser

device is level.

(f) Laser can experience interference from reecons on the walls of the pool.

It is best to use the laser when the sun is low or the sky is overcast.

USER GUIDE

Laser Device

Charging Port:

» Use only the charger

provided with unit

DEVICE CONTROLS

Ex.1

In this example the device should be set back

from the exact center, to capture the inside

radius of the kidney.

Tara Liners & Safety Covers • 256-725-2500 • www.taraliners.com/laser

GoodGoodPoorPoor

Power Switch:

» On: Illuminated

» O: Dark

3. Pool Preparaon

(a) Drain pool and remove liner and any material aached to pool wall.

(b) Coat the pool wall with neutral reecve surface (laser spray). Ex. 2

5. Prior to Scanning

(a) Before running the laser, nd your manual pool measurements. Manually measure the shallow

end and deep end depths, side walls, back walls and any other features.

(b) Record all measurements on the Tara Laser 2 order form and ll out the form completely.

Ex. 3

Download Tara Laser 2 order form at www.taraliners.com/forms.

measurement on the order form.

4. Scanning the Pool

(a) Turn Laser power switch on.

Ex. 4

(b) Start the Tara Laser 2 App on the iPad.

(d) In the App press the Level buon. The laser will rotate 90° and stop. Check to make

sure the lasers are equal on each side of the pool.

(e) Repeat this to make sure that it is level in the lasers are level for the front and back

of the pool.

(f) Force quit the App

(g) Then restart the App and press the Connect buon again

(h) Press the Add Photo buon and take a picture of your manual measurements. Ex. 5

(i) Scan either Fast or Slow. The iPad display will change from the Control Screen to

begin showing the pool perimeter Ex. 4. A fast scan will be nished in 3.5 min and

record up to 1000 points. A slow scan will take 5 min 40 sec and record 1800 points.

(j) When the scan is complete then press the Send Data buon. An Email will open.

Add any addional informaon and Send the email.

(k) Power down the Laser. The iPad will send the email when it connects to the

internet again.

LINER ORDER FORM - TARA LASER

2294 Old Highway 431 • Owens Cross Roads, Al 35763

Ph: (256)725-2500 or (866)725-8272 • Fax: (877)333-8272

ww w

ta r a l i n e r s

co m

Wall

Floor

Depth

Length

SAFETY LEDGE

SKETCH THE SHAPE OF THE POOL

COVE

(in.)

WALL:

(in.)

DEPTH:

(in.)

LENGTH

(in.)

DEPTH AND WALL MEASUREMENTS

MANUAL MEASUREMENT

(SHALLOW END BREAK)

IMPORTANT!

PLEASE INCLUDE ONE MEASUREMENT, OF THE SHALLOW END BREAK, TAKEN WITH A

TAPE MEASURE TO CHECK THEACCURACY OF THE OVERALL MEASUREMENT.

N EMLI

View From

Deep End

(J)

(ft.)

(in.)

SHALLOW END

(K)

(ft.)

(in.)

DEEP END

(G)

(ft.)

(in.)

SIDE WALL1

(I)

(ft.)

(in.)

SIDE WALL 2

(L)

(ft.)

(in.)

BACK WALL

(Y):

(in.)

(X):

(in.)

q q q

1 2 3

RADIUS

DIAGONAL

INCHES

45º

90º

(in.)

VINYL STEP

STEP CORNERS

SET BACK

FLOOR

THICKNESS

YES

ROD

POCKETS BEADED

STEP

FOAM

INDICATEPOSITION OF VINYL STEP

IFAPPLICABLE

STEP DETAILS

DO NOT INCLUDE STEPSACROSS THE WIDTH OF THE POOL

IN THE OVERALLLENGTH “B” MEASUREMENT

(in.)

INSIDE CORNER (TRUE L & T-SHAPE POOLS)

Date: Due:

DEALER

Company:

Address:

Contact: ______________________ Phone:___________________

E-Mail:

DISTRIBUTOR

Company:

Address:

Contact: ______________________ Phone:___________________

E-Mail:

SHIPPING INSTRUCTIONS

Branch:

Dealer:

Pick Up:

Ship Via:

Other:

ORDER INFORMATION

PO #:

Job Name:

Price:

Serial #:

Stock #:

Sidewall Pattern:

Bottom Pattern:

MOUNTING

Beaded:

Overlap:

q

Overlap Size:



COMMENTS

CITY

STATE

ZIP

For Additional Order Forms visit, www.taraliners.com/forms

INCHES

2294 Old Hwy. 431, Owens Cross Roads, AL 35763

Ex. 2

Ex. 3

Ex. 4

Ex. 5

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Each Tara Laser 2 is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is up to and including 90 days from the receipt of shipment. Parts, product

repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Tara Laser 2 authorized reseller, and does not apply to fuses, disposable baeries, or to

any product which, in Tara Manufacturing’s opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal condions of operaon or handling. Tara Manufacturing warrants that

soware will operate substanally in accordance with its funconal specicaons for 90 days and that it has been properly recorded on non-defecve media. Tara Manufacturing does not warrant that soware will

be error free or operate without interrupon. Tara Manufacturing’s warranty obligaon is limited, at Tara Manufacturing’s opon, to refund of the purchase price, free of charge repair, or replacement of a defecve

product which is returned to a Tara Manufacturing within the warranty period. To obtain warranty service, contact Tara Manufacturing (2294 Old 431 Hwy., Owens Cross Roads, AL, 256-725-2500) to obtain return

authorizaon informaon. Then send the product as instructed, with a descripon of the diculty, postage and insurance prepaid (FOB Desnaon). Tara Manufacturing assumes no risk for damage in transit. Follow-

ing warranty repair, the product will be returned to Buyer, transportaon prepaid (FOB Desnaon). If Tara Manufacturing determines that failure was caused by neglect, misuse, contaminaon, alteraon, accident, or

abnormal condion of operaon or handling, including overvoltage failures caused by use outside the product’s specied rang, or normal wear and tear of mechanical components, Tara Manufacturing will provide an

esmate of repair costs and obtain authorizaon before commencing the work. Following repair, the product will be returned to the Buyer transportaon prepaid and the Buyer will be billed for the repair and return

transportaon charges (FOB Shipping Point).

THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TARA MANUFACTURING SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUD-

ING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY. Since some countries or states do not allow limitaon of the term of an implied warranty, or exclusion or limitaon of incidental or consequenal

damages, the limitaons and exclusions of this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdicon,

such holding will not aect the validity or enforceability of any other provision.

Tara Liners & Safety Covers • 256-725-2500 • www.taraliners.com/laser

TROUBLESHOOTING

Laser stops in the middle of a measurement: Somemes the laser will pause for a second to calibrate. Allow it

5 - 10 seconds to complete the calibraon process.

Laser stops and won’t connue for longer than 10 seconds: A strong glare from the pool walls, can inter-

fere with the laser and cause it to freeze. Try shading the wall of the pool where the laser is measuring. If this doesn’t work wait to

measure the pool when condions are not as bright.

Laser device can not connect to App: The laser connects via Bluetooth signal to an iPad or iPhone. If the distance

between the laser and the iPad or iPhone is too great it will loose signal. Try moving the iPad or iPhone closer to the laser.

Sharp spikes on the diagram display: The surface is too bright or reecve and is interfering with the laser.

For all other issues call Technical Support, 256-725-2500. Never aempt to open the case

of the laser!

LASER CLASSIFICATION

The Tara Laser 2 generates a visible laser beam that is emied from the front of the device. The device complies with laser class 2

according to:

_ IEC60825-1: 2007 Safety of laser products

_ EN60825-1: 2007 Safety of laser products

Laser class 2 products

Do not look into the laser beam and do not unnecessarily aim at other persons. The eye is usually protected by prevenve reac-

ons such as the eyelid closure reex.

WORKING SPECIFICATIONS

Range 6 inches to 100 feet

Measuring accuracy Typ.: ± 0.12 in*

Laser class 2

Laser type 635 nm, < 1 mW

Baery run me: up to 4 complete pool measurements

Temperature range:

- Storage (-13°F to +130°F)

- Operaon (32°F to +90°F)

* Under favorable condions (good target surface, room temperature) up to 10 m (33). Under unfavorable condions such as

bright sunlight, a weakly reecng target surface or large temperature uctuaons, the deviaon can rise causing errors or shut-

down of the unit.

laser ii

TARA

Inhaltsverzeichnis

Andere Tara Messgerät Handbücher

Tara

Tara LASER II Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung