TE Connectivity NanoMQS 2280687-1 Bedienungsanleitung

Instruction Sheet

1 of 2

*Trademark

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

PRODUCT INFORMATION

1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

408-32201

12 OCT 15 Rev A

Figure 1

1. INTRODUCTION

This instruction sheet describes the use of Extraction Tool 2280687-1. This tool is designed to remove

NanoMQS contacts (1703930-[ ] and 2272196-[ ] from NanoMQS plug assemblies.

Read these instructions thoroughly before attempting to remove any contacts.

NOTE

All dimensions are in millimeters [followed by inches in brackets]. Figures and illustrations are for reference only and are not

drawn to scale.

2. DESCRIPTION

Each tool features a handle marked with the specific part number and a contact lance release tip. The contact

lance release tip depresses the contact locking lance to allow extraction of the contact.

3. EXTRACTION PROCEDURE

These steps are recommended: see Figure 2.

1. Orient the tool as shown with respect to the connector and wire being extracted.

2. Insert tool tip into BACK of lance cavity until tool stops. The tip of the tool will bottom in the back of the

housing. See detail for correct placement.

3. Holding tool in position, grip wire and pull contact out of housing.

4. Remove tool from housing.

5. Repeat as required.

PROPER USE GUIDELINES

Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low

volume applications. A wide selection of powered application equipment for extended-use, production operations is available.

Extraction Tool

NanoMQS 2280687-1

Lance Release Tip

Tool Part

Number

NanoMQS Connector

Extraction Tool

ORIGINAL INSTRUCTIONS

408-32201

Rev A

2 of 2

Figure 2

4. TOOL INSPECTION/MAINTENANCE

It is recommended that each tool be inspected upon its arrival to be sure it has not been damaged in transit,

and at regularly scheduled intervals to be sure it remains functional.

5. REVISION SUMMARY

Initial release of document

Inhaltsverzeichnis

Andere TE Connectivity Elektrowerkzeuge Handbücher

TE Connectivity

TE Connectivity 2390879-1 Bedienungsanleitung

TE Connectivity

TE Connectivity CERTILOK 9-1579022-1 Bedienungsanleitung

TE Connectivity

TE Connectivity 2377026-1 Bedienungsanleitung

TE Connectivity

TE Connectivity 59981-1 Bedienungsanleitung

TE Connectivity

TE Connectivity 59275 Bedienungsanleitung

TE Connectivity

TE Connectivity HPi 10 TE Bedienungsanleitung

TE Connectivity

TE Connectivity PRO-CRIMPER III Bedienungsanleitung

TE Connectivity

TE Connectivity HT11K Bedienungsanleitung

TE Connectivity

TE Connectivity SDE-SA Bedienungsanleitung

TE Connectivity

TE Connectivity CBP-5T Mk II Referenzhandbuch

TE Connectivity

TE Connectivity PRO-CRIMPER III Bedienungsanleitung

TE Connectivity

TE Connectivity 539 666-2 Bedienungsanleitung

TE Connectivity

TE Connectivity PRO- CRIMPER III Bedienungsanleitung

TE Connectivity

TE Connectivity 2063523-1 Bedienungsanleitung

TE Connectivity

TE Connectivity SDE-SA Bedienungsanleitung

TE Connectivity

TE Connectivity HT11K Bedienungsanleitung

TE Connectivity

TE Connectivity 539744-2 Bedienungsanleitung

TE Connectivity

TE Connectivity 2396645-1 Bedienungsanleitung

TE Connectivity

TE Connectivity SDE-SA Bedienungsanleitung

TE Connectivity

TE Connectivity ERGOCRIMP 7-1579004-1 Bedienungsanleitung

TE Connectivity

TE Connectivity MATE-AX 2335290-1 Bedienungsanleitung

TE Connectivity

TE Connectivity 1213819-1 Referenzhandbuch

TE Connectivity

TE Connectivity 2063527-1 Bedienungsanleitung

TE Connectivity

TE Connectivity 2389783-1 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch