Technaxx DigiScan DS-02 Bedienungsanleitung

DigiScan DS-02

Portable Digital Image Scanner

User Manual

The Declaration of Conformity for this device is under the

Internet link: www.technaxx.de/

(in bottom bar “Konformitätserklärung”); Before using the

device the first time, read the user manual carefully.

Features

Portable, high-resolution scanner for negative

filmes and slide films

High brilliance of colour (white balance &

exposure compensation are automatically)

5 megapixle CMOS sensor

2.4" TFT display

SD / SDHC card slot up to 32GB

USB 2.0 interface (high speed)

Usable as stand alone device

Also usable with PC [Windows XP + Windows

Vista, Win7 + Win8 (32/64 bit)]

Small, light-weight, handy and easy to use

1. Description of Parts

Positive Slide Holder

135-Negative Film Holder

Rapid Slide Feeder

Cleaning Brush

Note:

Place the scanner on its side and slide the

end of the brush into the opening on the right side.

Then you can clean the backlight panel placed in

the film scanner.

2. Using the included Holders

Place the rapid slide feeder, like shown in the

picture, into the FILM HOLDER SLOT.

Push the lever towards the left, then pull the lever

back to the right again to load a slide from the

feeder. Repeat this step for subsequent slides

(which will push the used slides out the other side).

Loading Slides

Hold up the slide toward the light. Face the

trademark slide of the slide away from you. The

slide should not appear as a mirror image, but

„normal“. Turn the the slide on it’s head (but it still

need to be shown the same side).

Open the slide holder at the marked spot on the top

(OPEN). Insert the slide into the holder so that it fits

perfectly.

Close the slide holder and press the edges so that

it locks in place. Hold the slide holder as shown in

the picture (you see the front page) and insert the

Slide Holder into the slot on the right side of the

scanner. Note: Dust, scratches or finger prints will

show up on your saved images.

Loading Negatives

Hold up the negative toward the light. As you look

through the negative, you should be able to read

the small negative numbers normally (not a mirror

image). Turn the the negative on it’s head (but it still

need to be shown the same side).

Open the negative holder at the marked poin

(OPEN). With the negative holder laid open place

the negative into holder so that the notches of the

negative are aligned with the notches in the holder.

Close the negative holder and press the edges so

that it locks in place. Insert the negative holder into

the slot on the right side of the film scanner, like

shown in the picture.

Proper Operation Sequence

(1) Slide or load film/negative film to board holder.

(2) Insert board holder to scanner. (3) Connect

scanner USB cable to PC. (4) Press button MENU

to turn on scanner. (5) Press button SCAN (SMALL

CAMERA) to start scanning. (6) Move the bracket

by hand, slide for slide or negative for negative. (7)

After scanning is complete, remove the memory

card. (8) The pictures can be read directly on the

PC from the memory card or via a USB connection.

3. Operation Guide

MENU SMALL CAMERA

& Power (On/Off) & OK & Recording

Capture Picture

Once the video frequency is specified, the picture

can be taken within 3 seconds. In the main menu

select the recording mode to set slide style and EV

value. Confirm always with the OK (SMALL

CAMERA) button.

Resolution

Sign to card

00000

Number of scans available

Playback mode

Image Mirror & Image Rotation

Exposure Compensation (EV -2~2)

(1) Image Mirror & (2) Image Rotation

(1) When picture is scanned press . The

image alters from left to right, is adjusted, then

captured.

(2) Continue to press . The image alters

from up to down, is adjusted, then captured.

4. Main Menu

Enter the main menu by pressing the button

MENU.

1. Capture mode:

Black/White film, Positive film, Negative film

2. Exposure: Exposure Compensation (EV -2~2)

3. Resolution: 5M /10M

4. Language: English, French, German, ltalian,

Spanish, Chinese, Dutch, Japanese.

5. USB MSDC: MSDC mode (mass storage)

(= USB connection)

5. Capture Mode

6. Slide Style

Press the button MENU to enter into main manual

to choose slide style on shooting mode. Choose

needed image type:

1. Black/White, 2. Positive film, 3. Negative film.

Inhaltsverzeichnis

Andere Technaxx Scanner Handbücher

Technaxx

Technaxx TX-184 Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung