TechniSat DigitMod S1 Bedienungsanleitung

DiSEqC 1.2

Integrated

video recor-

der

PVR

For the reception of free-to-air and encrypted pro-

grammes broadcast via satellite, (e.g.. VIACCESS,

IRDETO, SECA ,etc. )

Operating Manual

with integrated

Premiere decoding system

and PCMCIA interface for

a CI Module.

With integrated Premiere decoding system and

PCMCIA interface for installing a CI module.

Operating Manual

DigiCorder S1

Digital receiver

with

integrated hard disk drive

Bed_anl_.qxd 20.02.04 16:28 Seite 1

1 Contents

1 Contents . . . . . . . . . . . . . . . . . . . . .2

2 Illustrations . . . . . . . . . . . . . . . . . . .5

3 Please read this first . . . . . . . . . . .8

Safety notes . . . . . . . . . . . . . . . . . . . . . . . . .9

4 Connections . . . . . . . . . . . . . . . . .11

4.1 Mains power connection . . . . . . . . . . . . . .11

4.2 External unit . . . . . . . . . . . . . . . . . . . . . . . .11

4.3 Connecting to a television set . . . . . . . . . .11

4.4 Video cassette recorder (VCR) . . . . . . . . .12

4.5 HiFi amplifier . . . . . . . . . . . . . . . . . . . . . . .13

4.6 Unit with S-Video input (Hosiden) . . . . . . .13

4.7 Serial interface (RS 232) . . . . . . . . . . . . . .13

5 Initial installation . . . . . . . . . . . . .13

6 Settings . . . . . . . . . . . . . . . . . . . . .17

6.1 Language for display . . . . . . . . . . . . . . . . .17

6.2 Basic settings . . . . . . . . . . . . . . . . . . . . . . .17

6.2.1 Time difference to GMT (hours) . . . . . . . . .18

6.2.2 Country . . . . . . . . . . . . . . . . . . . . . . . . . . .18

6.2.3 Remote control code . . . . . . . . . . . . . . . . .18

6.2.4 Standby clock . . . . . . . . . . . . . . . . . . . . . . .18

6.3 Audio/Video settings . . . . . . . . . . . . . . . . .18

6.3.1 Picture format TV set . . . . . . . . . . . . . . . . .19

6.3.2 Language (Audio signal) . . . . . . . . . . . . . .19

6.3.3 Language (Sub-titles) . . . . . . . . . . . . . . . . .19

6.3.4 TV SCART mode . . . . . . . . . . . . . . . . . . . .19

6.3.5 Video system . . . . . . . . . . . . . . . . . . . . . . .19

6.3.6 Dolby Digital (AC3) . . . . . . . . . . . . . . . . . .19

6.3.7 UHF output channel . . . . . . . . . . . . . . . . . .20

6.4 Antenna setting . . . . . . . . . . . . . . . . . . . . .20

6.4.4 Rotating antenna . . . . . . . . . . . . . . . . . . . .23

7 Operation . . . . . . . . . . . . . . . . . . . .24

7.1 Switching on and off . . . . . . . . . . . . . . . . .24

7.2 Programme selection . . . . . . . . . . . . . . . . .24

7.3 Receiving encrypted programmes . . . . . . .26

7.3.1 Multifeed options . . . . . . . . . . . . . . . . . . . .27

7.3.2 Selecting a starting time . . . . . . . . . . . . . .27

7.4 Volume adjustment . . . . . . . . . . . . . . . . . .27

7.5 Selecting a different language . . . . . . . . . .28

7.5.1 Dolby Digital (AC3 mode) . . . . . . . . . . . . .28

7.6 TV/Radio selection/switching . . . . . . . . . . .28

7.7 Return to last programme selected. . . . . .29

7.8 Display time and programme info . . . . . . .29

7.9 Additional programme information . . . . . . .29

7.10 Transponder information . . . . . . . . . . . . . .29

Bed_anl_.qxd 20.02.04 16:28 Seite 2

7.11 Freeze frame . . . . . . . . . . . . . . . . . . . . . . .30

7.12 Video text . . . . . . . . . . . . . . . . . . . . . . . . . .30

7.13 Sub-titles . . . . . . . . . . . . . . . . . . . . . . . . . .31

7.14 Electronic Programme Guide SFI . . . . . . .31

7.14.1 Downloading SFI data . . . . . . . . . . . . . . . .32

7.14.2 Interrupting the download procedure . . . . .32

7.14.3 Display Electronic Programme Guide . . . .32

7.14.4 Now (Table with current programme contents)

7.14.5 Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

7.14.6 More . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

7.14.7 SFI functions . . . . . . . . . . . . . . . . . . . . . . .34

7.14.7.1 SFI information . . . . . . . . . . . . . . . . . . . . .34

7.14.7.2 SFI timer programming . . . . . . . . . . . . . . .34

7.14.7.3 SFI programme overview . . . . . . . . . . . . . .35

7.14.7.4 SFI overview by programme type . . . . . . .36

7.14.8 End SFI . . . . . . . . . . . . . . . . . . . . . . . . . . .36

7.15 Hard drive operation . . . . . . . . . . .37

7.15.1 Record . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

7.15.1.1 Instant Record . . . . . . . . . . . . . . . . . . . . . .37

7.15.1.2 Timer recordings . . . . . . . . . . . . . . . . . . . .39

Timeshift function . . . . . . . . . . . . . . . . . . . .42

7.15.2 Playback . . . . . . . . . . . . . . . . . . . .43

7.15.2.1 Play back hard drive recordings . . . . . . . .43

7.15.2.2 Pause/freeze frame . . . . . . . . . . . . . . . . . .44

7.15.2.3 Fast forward and revers . . . . . . . . . . . . . . . .44

7.15.2.4 End Playback . . . . . . . . . . . . . . . . . . . . . . .44

7.15.3 Managing the hard drive . . . . . . . .44

7.15.3.1 Managing recordings . . . . . . . . . . . . . . . . .45

7.15.3.2 Hard drive information . . . . . . . . . . . . . . . .46

7.15.3.3 Hard drive maintenance . . . . . . . . . . . . . . .46

7.16 Sleep timer . . . . . . . . . . . . . . . . . . . . . . . . .46

8 Changing basic programming . . . .47

8.1 Configure a Favourites list . . . . . . . . . . . . .47

8.1.1 Call up programme list administration . . . .47

8.1.2 Add programmes to Favourites list . . . . . .48

8.1.3 Delete programmes . . . . . . . . . . . . . . . . . .49

8.1.4 Sort programmes . . . . . . . . . . . . . . . . . . . .50

8.2 Programming the electronic programme guide

8.3 Parental control function . . . . . . . . . . . . . .53

8.4 Programme Search/Scan . . . . . . .55

8.5 Service settings . . . . . . . . . . . . . . . . . . . . .59

8.5.1 Activating default setting . . . . . . . . . . . . . .59

Bed_anl_.qxd 20.02.04 16:28 Seite 3

8.5.2 Delete all programmes . . . . . . . . . . . . . . . .59

8.5.3 Updating software . . . . . . . . . . . . . . . . . . .60

8.5.4 Copying settings . . . . . . . . . . . . . . . . . . . .61

8.6 System configuration . . . . . . . . . . . . . . . . .61

8.7 Encryption system . . . . . . . . . . . . . . . . . . .61

9 Operating a rotating antenna

(DiSEqC 1.2) . . . . . . . . . . . . . . . . . .62

9.1 Eastern and Western limits . . . . . . . . . . . .62

9.1.1 Delete existing limit settings . . . . . . . . . . .62

9.1.2 Setting Eastern limit . . . . . . . . . . . . . . . . . .63

9.1.3 Setting Western limit . . . . . . . . . . . . . . . . .63

9.2 Geo-positioning . . . . . . . . . . . . . . . . . . . . .63

9.3 Setting satellite position . . . . . . . . . . . . . .64

9.3.1 Selecting satellite position . . . . . . . . . . . . .65

9.3.2 Adjusting the satellite antenna . . . . . . . . . .66

9.3.3 Saving a satellite position . . . . . . . . . . . . .67

9.4 Current satellite liste . . . . . . . . . . . . . . . . .67

9.4.1 Go to satellite position . . . . . . . . . . . . . . . .68

9.5 Delete satellite position . . . . . . . . . . . . . . .68

9.6 Reference position . . . . . . . . . . . . . . . . . . .68

10 Technical terms . . . . . . . . . . . . . .69

11 Technical data . . . . . . . . . . . . . . . .71

12 Trouble-shooting guide . . . . . . . . .75

13 Annexure . . . . . . . . . . . . . . . . . . . .77

Your unit carries the CE logo, and complies with all relevant EU standards.

Subject to change without notice, not responsible for printing errors. Correct as

at 11/03

TechniSat and DigiCorder S1 are registered trade-marks of

TechniSat Digital GmbH

P.O. Box 560

D-54541 Daun

Germany

www.technisat.de

Technische Hotline (in Germany)

0180/5005-911*

*Cost 0,12 EUR/Min. via the Deutsche Telekom AG network

Note !

If it should become necessary to return your unit to the manufacturer, please

use only the address below:

TechniSat Teledigital AG

Service-Center

Löderburger Str. 94

D-39418 Staßfurt

Germany

Bed_anl_.qxd 20.02.04 16:28 Seite 4

2 Illustrations

blue Fast forward

red Rewind

yellow:Pause, Play

green PVR-Navi-

gator, Stop

On/Standby

Programme list on/off

Back

Menu on/off

Sound on/off(mute)

Language select

Freeze frame

Option

Volume -

Programme +

Programme -

TV/Radio mode

Sleep Timer

Video text

SFI

Record

Multi-function keys

Numeric keys

0/AV

Volume +

Info

Arrow key right

Arrow key left

Arrow key up

Arrow key down

Remote control option:

In order to operate 2 TechniSat receivers with identical coding, television sets as well as

an additional future option, (e.g. VCR).

Use these keys to select the remote control option Sat 1 and use this to operate your

digital receiver, if you have not set this differently as described in Point 6.2.3:

> Press the SAT1 and OK keys simultaneously!

Remote control unit

Bed_anl_.qxd 20.02.04 16:28 Seite 5

Index . . . . . . . . . . . . . . . . . . . . . . .79

LNC

input Input terrestrial

antenna

LNC out-

put

SCART socket

TV Audio outputs

digital

SCART socket

VCR

Audio outputs

analogue

RS 232

interface

output Power socket

Inserting the CI module:

> Please note the manufacturer’s instructions for both the CI

module and card.

> Insert the appropriate smart card into the corresponding CI

module.

> Now insert the CI module carefully in the slot provided.

S-Video

output

Video

output

Ein/StandbyEin/Standby

LED display

Programme select

up/down Slot for CI moduleEject button for CI

module

On/Standby Alpha-numeric

display

Bed_anl_.qxd 20.02.04 16:28 Seite 6

3 Please read this first

> Before operating your unit for the first time, please

check that you have received all the components. The

package should contain:

1 digital receiver, 1 mains power cable, 1 remote con-

trol, 1 operating manual, 1 guarantee card, 2 batteries

(1,5V microcell).

> Insert the batteries supplied in the battery compartment

of the remote control unit, taking care to observe the

correct polarity.

> Before connecting you digital receiver, please first read

the safety notes in Chapter 3.

>Chapters 4, 5 and 6 describe how you should con-

nect and adjust the digital receiver to the external unit

(antenna dish, LNC, ...), to the television set, VCR, etc.

These settings need only be made once, and would

only have to be updated if there is any change in your

external unit, or if additional pieces of equipment are to

be connected.

>Chapter 7 describes all the functions important in

everyday use, e.g. programme selection or operating

the hard drive.

> In Chapter 8 you will find information on how to set

new programmes, or how to change the order of pro-

grammes in the list.

>Chapter 9 describes the settings to be made when

operating a rotating antenna.

> Technical terms used in the operating manual are

explained in Chapter 10.

> Technical data is set out in Chapter 11.

> A brief troubleshooting guide can be found in Chapter

12.

Important notes on operating the unit

The implementation of an "On Screen Display" (text shown on

screen) helps to simplify thed operation of the digital receiver,

and also helps to reduce the number of kews required on the

remote control unit. All functions are indicated on the screen,

and can be implemented with a few keys. Related functions

are combined in a "MENU". The function selected will be mar-

ked and highlighted in a different colour. The bottom line of the

display shows colour bars in green, red, yellow and blue, corr-

responding to the function keys in these colours. In the various

menus these colour bars represent different functions which

can be accessed by pressing the multi-function key of the

appropriate colour on the remote control unit. The function

keys are only active if a brief description appears in the appro-

priate field.

Key descriptions and other terms appearing in the OSD menu

Sehr geehrte Kundin, sehr geehrter Kunde,

Bed_anl_.qxd 20.02.04 16:28 Seite 7

are shown in emphasized letters in this operating manual.

Help:

Where available, press the blue function key to display help

texts, press again to disable the text display.

Disposal information

The packaging of this product consists entirely of recyclable

materials. Please separate the components accordingly, and

dispose of them via the “Dual System” or other local recycling

programmes.

Please ensure that discarded batteries from the remote con-

trol, as well as any other discarded electronic components,

are not disposed of in your regular household waste, but are

dsiposed of through the appropriate channels, either trough

your specialist retailer, or via the appropriate system of your

local authority).

Safety notes

For your own protection you should read the safety notes

carefully before operating your new unit for the first time.

The manufacturer accepts no responsibility for damage cau-

sed by inappropriate handling, or by ignoring the safety pre-

cautions in this manual.

> To ensure adequate ventilation, place the unit on a

smooth, even surface, and do not place any objects on

top of the unit. Ventilation slots located in the housing

are essential to conduct heat from the interior of the

unit.

> Do not place any burning objects, such as burning

candles, on the unit.

> Do not expose the unit to water (spray, drops), and do

not place any objects filled with liquid, e.g. vases, on

top of the unit.

> The unit should be operated only in a temperate clima-

te.

> Do not open the unit! You are in danger of experien-

cing an electrical shock. If it becomes necessary to

open the unit, this should be done only by trained per-

sonnel.

Disconnect the unit from the mains power supply and

call an authorised repair specialist if:

> the mains plug or the mains power cable are damaged

> the unit has been exposed to humidity, or liquid has

entered the unit

> in case of significant malfunction

> in case of signficant external damage

Temporary disconnection

In case of an electrical storm, or when you are away for an

extended period of time,e.g. while on holiday, you should

disconnect the unit from the mains power supply.

Bed_anl_.qxd 20.02.04 16:28 Seite 8

4 Connections

The items a b c etc. mentioned below refer to the illustration

on page 10.

4.1 Mains power connection

The digital receiver should be connected to the mains power

supply only once all the other connections with other items of

equipment have been made. This will prevent damage to the

digital receiver or to other components.

aWhen you have made all the other connections. use

the mains power cable supplied to connect the recei-

ver to a mains power supply providing 230 V/50-60

Hz.

4.2 External unit

4.2.1 Single unit operation

bUsing a suitable co-axial cable, connect the LNC

input of the digital receiver with the LNC of your

external unit. Please also note Point 6 under

“Settings”.

4.2.2 Operating an additional receiver in a single-

receiver installation

cIf you wish to operate an additional unit in a single-

receiver installation (e.g. an analogue receiver or an

ADR receiver), you can connect the LNC input of the

additional receiver with the LNC output of the DVB

receiver by means of a suitable co-axial cable. In

order for the satellite signal to be provided to the

additional receiver, your DVB receiver must be

operated in Standby mode. If your DVB receiver is

switched on, it will take over priority in controlling the

LNC.

4.3 Connection to a television set

When you have connected your digital receiver with

the television set as described in this chapter, it may be

necessary to adjust the digital receiver to the television stan-

dard of your television set.

To do this, please note Point 6.3.5 (Video system).

4.3.1 Via SCART cable

To ensure the best possible picture quality, use a SCART

cable to connect the digital receiver with the television set.

Proceed as follows:

dConnect the receiver (SCART socket TV) and the

Bed_anl_.qxd 20.02.04 16:28 Seite 9

television set (SCART socket) by means of a SCART

Connecting the DVB receiver to a satellite

installation

a. Mains power connection

b. Connection from the LNC to the LNC input(LNB IN) of

the DVB receiver.

c. Connection from the LNC output to the LNC input of an

analogue receiver.

d. Scart connection of the DVB receiver with the television

set.

e. Connection from the HF output mto the antenna input

socket of the television set.

f. Connection from a terrestrial antenna to the Terrest.

antenna input of the DVB receiver.

g. Scart connection from a video recorder to the VCR Scart

socket of the DVB receiver.

h. Connection from the S-Video output to the S-Video

input of another unit (e.g. beamer).

VCR

Analogue Receiver

e.g.

Beamer

Bed_anl_.qxd 20.02.04 16:28 Seite 10

Andere Handbücher für DigitMod S1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TechniSat Empfänger Handbücher

TechniSat

TechniSat EC 4004 Bedienungsanleitung

TechniSat

TechniSat EUROKLASSIK 1 Bedienungsanleitung

TechniSat

TechniSat TECHNISTAR S6 Installations- und Benutzerhandbuch

TechniSat

TechniSat DigiBox CRYPTOWORKS Bedienungsanleitung

TechniSat

TechniSat HDFV Bedienungsanleitung

TechniSat

TechniSat HDFS Bedienungsanleitung

TechniSat

TechniSat HDFS Bedienungsanleitung

TechniSat

TechniSat VIACAM TechniBox VIACAM Bedienungsanleitung

TechniSat

TechniSat DigiBox IRDETO Integrated IRDETO Bedienungsanleitung

TechniSat

TechniSat VIACCESS DigiBox VIACCESS Bedienungsanleitung

TechniSat

TechniSat TechniBox SIR Bedienungsanleitung

TechniSat

TechniSat DIGIT HD4 CX Bedienungsanleitung

TechniSat

TechniSat DIGIT MF4-K CC Bedienungsanleitung

TechniSat

TechniSat DIGIT MF4-S Bedienungsanleitung

TechniSat

TechniSat TECHNISTAR S5 Gebrauchsanweisung

TechniSat

TechniSat DiGYBOXX HD CX Bedienungsanleitung

TechniSat

TechniSat DigiBox CRYPTOWORKS Bedienungsanleitung

TechniSat

TechniSat DigiPal 1 Bedienungsanleitung

TechniSat

TechniSat DIGITRADIO 1980 Bedienungsanleitung

TechniSat

TechniSat TERRABOX T3 Bedienungsanleitung

TechniSat

TechniSat HD-S 261 Bedienungsanleitung

TechniSat

TechniSat DigiCorder Handbuch

TechniSat

TechniSat TechniBox VIACAM Bedienungsanleitung

TechniSat

TechniSat TechniCorder ISIO STC Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung