Technoline TEMPERATURE STATION Bedienungsanleitung

WIRELESS 868 MHz TEMPERATURE STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this compact 868MHz Temperature Station which

simultaneously displays time, indoor temperature and outdoor temperature

readings. With only two keys, being easy to operate, this product is ideal for use in

the home or office.

FEATURES:

LCD

Displa

Function

Keys

Hanging

Hole

Battery

compartment

cover

Removable

stand

The Temperature Station

• Quartz clock in 12 or 24-hour time display (hour and minute, manually set)

• Indoor and outdoor temperature reading in or degree Celsius (°C) or

Fahrenheit (°F)

• Can receive up to two outdoor transmitters for 3 outdoor channels

• Can show the outdoor reading of channel 1, 2 and 3 simultaneously

• Wireless transmission at 868 MHz

• Signal reception intervals at 4 seconds

• Minimum and Maximum records of indoor temperature and outdoor

temperature

• Low battery indicator

• Wall mounting or table standing

The Outdoor Temperature Transmitter

• Remote transmission of outdoor temperature to

Temperature Station by 868 MHz

• Shower proof casing

• Wall mounting case (Mounting at a sheltered place.

Avoid direct rain and sunshine)

SETTING UP:

When one transmitter is used

1. First, insert the batteries into the Temperature transmitter. (see “Install

and replace batteries in the Temperature transmitter“).

2. Immediately after and within 30 seconds, insert the batteries into

Temperature station (see “Install and replace batteries in the

Temperature station”). Once the batteries are in place, all segments of

the LCD will light up briefly. Following the time as 0:00 and the indoor

temperature will be displayed. If these are not displayed after 60 seconds,

remove the batteries and wait for at least 10 seconds before reinserting

them.

3. After inserting the batteries, the Temperature station will start receiving

data from the transmitter. The outdoor temperature and the signal

reception icon should then be displayed on the Temperature station. If this

does not happen after 3 minutes, the batteries will need to be removed

from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should

under good conditions be a distance no more than 100 meters between

the final position of the Temperature station and the transmitter (see notes

on “Mounting” and “868 MHz Reception”).

When more than one transmitter is used

1. User shall remove all the batteries from the temperature station and

transmitters and wait for 60 seconds if setting has been done with one

transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 30 seconds of powering up the first transmitter, insert the batteries to

the Temperature station. Once the batteries are in place, all segments of the

LCD will light up briefly. Following time as 0:00 and the indoor temperature

will be displayed. If they are not shown in LCD after 60 seconds, remove the

batteries and wait for at least 60 seconds before reinserting them.

4. The outdoor temperature from the first transmitter (channel 1) should then

be displayed on the Temperature station. Also, the signal reception icon will

be displayed. If this does not happen after 2 minutes, the batteries will need

to be removed from both units and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the outdoor

temperature readings from the first transmitter are displayed on the

Temperature station.

Note: User shall insert the batteries into the second transmitter within 10 seconds

of reception of the first transmitter.

6. The outdoor temperature from the second transmitter and the "channel 2"

icon should then be displayed on the Temperature station. If this does not

happen after 2 minute, the batteries will need to be removed from all the

units and reset from step 1.

7. Insert the batteries to the third transmitter as soon as the "channel 2" icon

and outdoor data are displayed on the Temperature station. Then within 2

minutes, the channel 3 outdoor data from the third transmitter will be

displayed and the channel icon will shift back to "1" once the third

transmitter is successfully received. If this is not happen, user shall restart

the setting up from step 1.

Note: User shall insert the batteries into the third transmitter within 10 seconds of

reception of the second transmitter.

8. In order to ensure sufficient 868 MHz transmission however, this should

under good conditions be a distance no more than 100 meters between

the final position of the Temperature station and the transmitter (see notes

on “Mounting” and “868 MHz Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed

as described above. Should transmission problems occur, it is necessary to

remove the batteries from all units and start again the set-up from step 1.

HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE

STATION The Temperature Station uses 2 x AAA, IEC LR3, 1.5V

batteries. When batteries will need to be replaced, the

low battery icon will appear on the LCD. To install and

replace the batteries, please follow the steps below:

1. Lift up the battery compartment cover.

2. Insert batteries observing the correct polarity (see

marking).

3. Replace compartment cover.

Inhaltsverzeichnis

Andere Technoline Wetterstation Handbücher

Technoline

Technoline WS9470 Bedienungsanleitung

Technoline

Technoline WS 6760 Bedienungsanleitung

Technoline

Technoline WS9132 Bedienungsanleitung

Technoline

Technoline WS 9422 Bedienungsanleitung

Technoline

Technoline WS 9255 Bedienungsanleitung

Technoline

Technoline WS 9750 Bedienungsanleitung

Technoline

Technoline WS 6812 Bedienungsanleitung

Technoline

Technoline WS9612 Bedienungsanleitung

Technoline

Technoline WS 6720 Bedienungsanleitung

Technoline

Technoline WS6767 Bedienungsanleitung

Technoline

Technoline WS6815 Bedienungsanleitung

Technoline

Technoline WS 9180 Bedienungsanleitung

Technoline

Technoline WS 6830 Bedienungsanleitung

Technoline

Technoline WS 6710 Bedienungsanleitung

Technoline

Technoline WS9252 Montageanleitung

Technoline

Technoline WL 1030 Bedienungsanleitung

Technoline

Technoline WS 9069 Bedienungsanleitung

Technoline

Technoline WS 9215 Bedienungsanleitung

Technoline

Technoline WS9251 Montageanleitung

Technoline

Technoline WS1900 Bedienungsanleitung

Technoline

Technoline WS6650 Bedienungsanleitung

Technoline

Technoline WS6501 Bedienungsanleitung

Technoline

Technoline WS6447 Bedienungsanleitung

Technoline

Technoline WS 9120 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung