Technology Solutions AcuraGlobal BTL-1010 2D Bedienungsanleitung
USER
GUIDE:
BTL-1010 2D
WEARABLE
BLUETOOTH
®
UHF
RFID
READER
www.ACURA.com
Design
•
Development
• Manufacture
www
.TSL.com
TERMS & CONDITIONS
© 2014 TSL. All rights reserved.
No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,
without permission in writing from Technology Solutions (UK) Ltd. This includes electronic or mechanical means,
such as photocopying, recording, or information storage and retrieval systems. The material in this manual is
subject to change without
notice.
Technology Solutions (UK) Ltd
(TSL)
reserves the right to make changes to any product to improve r
eliability
,
function, or design.
TSL
does not assume any product liability arising out of, or in connection with, the
application
or use of any product, circuit, or application described herein. No license is granted, either expressly or
by
implication, estoppel, or otherwise under any patent right or patent, covering or relating to any
combination,
system,
apparatus, machine, material, method, or process in which
TSL
products might be used. An
implied
license exists
only for equipment, circuits, and subsystems contained in
TSL
products.
TSL
and the
TSL
logo are registered
trademarks of
TSL.
Other product names mentioned in this manual may be trademarks or r
egister
ed
trademarks of
their respective companies and are hereby
acknowledged.
All software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a
licensed basis.
TSL
grants to the user a non-transferable and non-exclusive license to use each software or
firmware program delivered hereunder (licensed program). Except as noted below, such license may not
be
assigned, sublicensed, or otherwise transferred by the user without prior written consent of
TSL.
No right to
copy
a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not
modify, merge, or incorporate any form or portion of a licensed program with other program material,
cr
eate a
derivative work from a licensed program, or use a licensed program in a network without written
per
mission
from
TSL.
The user agrees to maintain
TSL’s
copyright notice on the licensed programs delivered hereunder,
and
to include the same on any authorized copies it makes, in whole or in part. The user agrees not to
decompile,
disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof.
TSL
reserves the right to make changes to any software or product to improve reliability, function, or
design.
TSL
does not assume any product liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., r
egister
ed
in the U.S. and other countries. iOS is a registered trademark of Apple
Inc.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been
designed
to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may
affect
wireless
per
for
mance.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Technology Solutions (UK) Ltd is under license. Other trademarks and trade names are those of
their respective owners.
©
Technology Solutions (UK) Ltd 2014
2
BTL-1010 2D UHF Reader
User Guide
V1.24
www
.ACURA.com
CONTENT
Introduction 4
Parts
of the BTL-1010 2D
UHF
Reader 4
Using the BTL-1010 2D
UHF
Reader 5
Battery Installation or Removal 5
Locking the Battery Cover (Optional) 9
Charging and Micro
USB
Connection 10
Connecting the Micro
USB
cable 10
Button Operation 11
Primary button action 11
Secondary Button action 11
Reading Transponders 12
Status LED 13
Connections 14
Bluetooth
® wireless technology connection 14
Compatible Apple product models 14
Other compatible products 14
Setting up a Bluetooth
® connection with an Apple product 14
View
list of Bluetooth
® Devices (iOS 7) 15
Pair
with
ACURA Bluetooth
® device 16
Micro
SD
Card 20
Location and Installation 20
Auto Run
File
(AUTO.TXT) 21
Log
File
(LOG.TXT) 21
Software
Development 22
Troubleshooting and Maintenance 23
Maintenance 23
Troubleshooting 23
Regulatory information 24
Information to the user – FCC 24
RF
Exposure Guidelines 24
Laser Warning 24
Health and
Safety
Recommendations 25
Waste
Electrical and Electronic Equipment (wEEE) 26
Warranty 26
About TSL 28
About 28
Contact 28
Histor
y
Version
Date
Modifications
1.0 05/08/2014 Document creation
1.1 28/08/2014 iOS 5/6 sections remo
v
ed and replaced with iOS7
1.2 30/09/2014 iOS compatibility list upda
t
ed
1.22 17/10/2014
R
egula
t
ory information upda
t
ed
1.23 27/10/2014
R
egula
t
ory information upda
t
ed
1.24 20/11/2014 Screenshot outlines added
©
Technology Solutions (UK) Ltd 2014
3
BTL-1010 2D UHF Reader
User Guide V1.24
www
.ACURA.com
INTRODUCTION
Technology Solutions’ BTL-1010 2D UHF Reader provides Ultra High Frequency (UHF) Radio Frequency
Identification
(RFID),
with optional barcode scanning functionality. The unit can be used stand alone or paired with
a Bluetooth
®
wireless technology enabled host device. It can be used with UHF transponders including the
EPC
Global Class 1
Generation 2
transponders.
PARTS OF THE BTL-1010 2D UHF
REA
D
E
R
WARNING
LASER
LIGHT.
DO NOT STARE INTO
BEAM.
CLASS
2
LASER
PRODUCT
.
LASERSTRAHLUNG
NICHT
IN
DEN STRAHL BLICKEN.
LASER KLASSE
2.
LUMIÈRE
LASER NE PAS REGARDER
DANS LE FAISCEAU. APP
AREIL
À LASER DE CLASSE
2.
630-670nm
1mW
Status
LEDs
Trigger
Button
Micro USB
connector
UHF
Antenna
FIGURE 1:
Parts
of
the BTL-1010 2D UHF Reader
©
Technology Solutions (UK) Ltd 2014
4
BTL-1010 2D UHF Reader
User Guide V1.24
www
.ACURA.co
m
USING THE BTL-1010 2D UHF
BATTERY INSTALLATION OR
REMOV
AL
The battery is charged using the supplied micro USB lead and therefore is unlikely to need to be changed
once
installed. To access the battery compartment a slider switch must be moved. The battery compartment cover has
a release latch. To access the battery compartment, move the battery cover release slider to the position shown in
the diagram
below
.
Battery cover
release
slider
FIGURE 2:
Battery cover release slider
in
locked
position
‘Unlocked’ warning
label
FIGURE 3:
Battery cover release slider
in
unlocked
position
©
Technology Solutions (UK) Ltd 2014
5
BTL-1010 2D UHF Reader
User Guide
V1.24
USING THE BTL-1010 2D UHF
Once the battery cover release slider has been moved to the unlocked position, the battery cover can be r
emoved
by simply pulling away from the BTL-1010 2D
body:
FIGURE 4:
Removeable
battery cover
FIGURE 5:
Remove battery cover
in
this
direction
©
Technology Solutions (UK) Ltd 2014
6
BTL-1010 2D UHF Reader
User Guide
V1.24
USING THE BTL-1010 2D UHF
The battery contacts need to be face down at the top of the battery to meet the contacts shown in the image
below
.
Battery
contacts
FIGURE
6:
Battery placement
FIGURE 7:
Battery
in
position
©
Technology Solutions (UK) Ltd 2014
7
BTL-1010 2D UHF Reader
User Guide
V1.24
USING THE BTL-1010 2D UHF
Once the battery is installed the actions to replace the cover are:
●Align the top edge of battery cover with the BTL-1010 2D
body
●Push the battery cover down into
position
●Slide the locking switch into
position
FIGURE 8:
Replace
battery cover
FIGURE 9:
Move battery cover release slider
to
locked
position
©
Technology Solutions (UK) Ltd 2014
8
BTL-1010 2D UHF Reader
User Guide
V1.24
USING THE BTL-1010 2D UHF
LOCKING THE BATTERY COVER
(OPTIONAL)
The battery cover can be locked into position using two M1.6x6mm Torx pan head
scr
ews.
M1.6x6mm Torx pan head
screw.
FIGURE 10:
Battery cover
locking screw location
FIGURE
11:
Battery cover fully locked
©
Technology Solutions (UK) Ltd 2014
9
BTL-1010 2D UHF Reader
User Guide
V1.24
USING THE BTL-1010 2D UHF
CHARGING AND MICRO USB
CONNECTION
CONNECTING THE MICRO USB
CABLE
The BTL-1010 2D UHF Reader kit is supplied with a micro USB lead for charging and synchronisation. A USB
PSU
is also supplied for independent charging of the BTL-1010 2D UHF Reader. The Micro USB connector is
inserted into the BTL-1010 2D
UHF Reader as shown
below
.
FIGURE 12:
Location
of
Micro USB
socket
FIGURE 13:
Attaching the Micro USB
cable
©
Technology Solutions (UK) Ltd 2014
10
BTL-1010 2D UHF Reader
User Guide V1.24
Inhaltsverzeichnis
Andere Technology Solutions Scanner Handbücher
