TECshow THUNDERSTORM Bedienungsanleitung

THUNDERSTORM

USER MANUAL / MANUAL DE USUARIO

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE

POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

p. 2THUNDERSTORM

ENGLISH VERSION

Overview

Thunderstorm is an innovative and revolutionary eect that

combines Laser, LED

Moonflower eect & a High-power strobe all-in-one. With 6

RGBWA+UV LEDs, 8 White

LED and a very powerful red and green laser you can reach

new horizons. Combine the

eye-catching moonflower eect with the razor-sharp laser

beams to make your setup

stand out. Thundestorm has 4 dierent operational modes

(Sound-Active, Auto-run,

DMX & Master/Slave), 8 grating Laser eects & incredibly fast

movements.

Specifications

Eects & Functions

All-in-One eect: Laser + LED moonflower + Strobe

8 grating Laser eects

Strobe & Pulse eect

15 preset colors

Dimmer: Full range 0-100%

Razor sharp beams

Control

Operational modes: Sound Active, Auto-run, DMX, Master/Slave

DMX Channels: 10

High-speed stepper motor

Built-in microphone

Operating temperature: 10ºC~40ºC

Electrical

Power supply: AC100V~240V 50/60Hz

Max power consumption: 50W

Physical

4-digit LED display

Power supply connectors: Interlock In/Out

DMX connectors: 2 XLR connectors (XLR-3 In and Out)

Dimensions: 304x230x247 mm. / 12x9x9.75 in.

Weight: 5 Kg. / 11 Lbs.

• All maintenance must be carried out by a qualified

electrician.

• A minimum distance of 0.5m must be maintained between

the equipment and a combustible surface.

• The product must always be operated in a well ventilated area.

• DO NOT stare directly into the light source.

• Always disconnect the power before carrying out any

maintenance.

• The earth must always be connected to the ground.

• Ensure that all parts of the equipment are kept clean and

free of dust.

IMPORTANT

Every person involved with the installation, operation

and maintenance of this device has to be qualified.

• Follow the instructions of this manual.

• Consider this manual to be part of the total product.

• Keep this manual for the entire service life of the product.

• Pass this manual on to every further owner or user of

the product

• Download the latest version of the user manual from

the Internet.

OPERATING DETERMINATIONS

• This product is only allowed to be operated with an al-

ternating voltage of 100-240 V, 50/60 Hz.

• This device is designed for professional use, e.g. on stag-

es, in clubs, bars, theatres etc.

• Do not shake the device. Avoid brute force when install-

ing or operating the device.

• When choosing the installation-spot, please make

sure that the device is not exposed to extreme heat,

moisture or dust. There should not be any cables ly-

ing around. Please make sure that the unit cannot be

touched or bumped.

• When using smoke machines, make sure that the de-

For your own safety, please read this user manual careful-

ly before you initially start-up.

SAFETY WARNING

vice is never exposed to the direct smoke jet and is in-

stalled in a distance of 0.5 meters between smoke ma-

chine and device.

• The ambient temperature must always be between -15°

C and +45° C. Keep away from direct insulation (particu-

larly in cars) and heaters.

• Never use the device during thunderstorms. Over volt-

age could destroy the device. Always disconnect the de-

vice during thunderstorms.

• The device must only be installed on a non-flamma-

ble surface. In order to safeguard suicient ventilation,

leave 50 cm of free space around the device.

• For overhead use (mounting height >100 cm), always

fix the fixture with an appropriate safety-rope. Fix the

safety-rope at the correct fixation points only. The safe-

ty-rope must never be fixed at the transport handles!

• Only operate the fixture aer having checked that the

housing is firmly closed and all screws are tightly fastened.

• Operate the device only aer having become familiarized

with its functions. Do not permit operation by persons

not qualified for operating the device. Most damages are

the result of unprofessional operation!

• Please consider that unauthorized modifications on the

device are forbidden due to safety reasons!

• Never remove the serial barcode from the device as this

would make the guarantee void.

p. 3THUNDERSTORM

ENGLISH VERSION

B C DA

LED Display Instruction

Operating Instruction: press button marked as “A” to select a

function, For details, please see the “OPERATION MENU” section.

Press button marked as “B” or button marked as “C” to modify

values . Press button marked as “D” to save your settings.

A. Function button (MENU)

B. UP button (UP)

C. DOWN button (DOWN)

D. Enter button (ENTER)

E. LED display

LED Digital Display Operation Menu:

No. Menu Function

1Addr DMX address DOWN/UP to +/- (1-512)

2AUTO

Aut1,Auto Play1,six colors led derby eect auto play

Aut2, Auto Play2, white led auto play

Aut3,Auto Play3, laser auto play

Aut4,Auto Play4, all eects auto play

SPEE,auto speed 0-99

3Soun

Sou1,Sound Active 1

Sou2,Sound Active 2

Sou3,Sound Active 3

SESE,sound sensitivity 0-99

4Vers Ve1.0

1. When starting up,it will display the last time’s operation .In

case without any buttons,it will close screen automatically

aer 20seconds.When no dmx,the first dot of led display will

keep on.When has dmx,the first dot will blink

2. The master light can choose any mode of Auto/Soun

modes, the slave light is set as A001, Just one light could be

settled to be master.

3. At most 10 lights could be linked in one electricity source.

Function:

1. Press MENU to select Addr / Chnd/NAnu/ SHOU /CoLo/

SPEE/ Auto/Soun / Version , Press ENTER to the next menu

or save, Press UP / DOWN to select function, Press ENTER to

save; Long Press MENU to exit.

2. Addr, Address setting, DOWN/UP to select 1-512

3. Chnd, Channel setting

4. NAnu, LED brightness adjust and laser(on or o)

5. ShoU, select scene and show

6. CoLo: select color

7. SPEED: Auto speed

8. Auto: Auto mode

9. Soun: Sound mode

10. Vers: version

p. 4THUNDERSTORM

ENGLISH VERSION

Channel

DMX-512Value 0-255 Details

CH1 Control Mode 0-9 Black- out

Oct-39 Auto Play1(Six colors LED auto)

40-69 Auto Play2 (White LED auto)

70-99 Auto Play3 (Laser auto)

100-129 Auto Play4 (Mixing auto)

130-159 Sound Control 1(Six colors LED sound)

160-189 Sound Control2 (White LED sound)

190-219 Sound Control3 (Laser sound)

220-249 Sound Control4 (Mixing sound)

250-255 DMX Mode

CH2 RGBWYV Control 0-9 RGBWYP black-out

10--198 Choose colors (63 groups), each 3 data for 1 color group

199-225 Color chase1 (single color)

226-255 Color chase 2(single or multiple)

CH3 Auto Play LED Eotic Speed 0-255 Auto speed: LED color chase speed from slow to fast

CH4 LED Strobe 0-9 LED No strobe

10-244 LED Strobe Speed from slow to fast

245-255 LED strobe by sound

CH5 White Color LED 0-9 Whit LED black out

10-135 White LED output position choose: 5 data for only 1 choose

135-255 White LED chase eect

CH6 White Strobe and Eotic

Speed 0-127 no strobe, but White LED chase speed from slow to fast

127-255 With strobe, white LED chase speed from slow to fast

CH7 Laser color control 0-9 Laser o

Oct-49 Red

50-89 Green

90-129 Red and Green

130-169 Red and Green flicker

170-209 Green and Red flicker

210-249 Red, green synchronous flicker

250-255 Red, green alternative flicker

CH8 Laser Strobe Control 0-9 Strobe O

10-244 Strobe Speed (from slow to fast)

245-255 Laser strobe by sound

CH9 LED Step Motor Control 0-9 Step motor O

10-127 Step Motor clockwise from slow to fast

128-255 Step Motor counterclockwise from slow to fast

CH10 Laser Step Motor Control 0-127 Laser pattern choose

128-255 Laser pattern chase from slow to fast

p. 5THUNDERSTORM

ENGLISH VERSION

DMX-512 controller connection

3-Pins DMX Out (female)

3-Pins DMX In (male)

1 earth 2 signal - 3 signal +

10CH for example

First(address001) Second(address011) Third(address021)

DMX in DMX out to next light

DMX address setting

Each fixture must set a specific starting address. When re-

ceiving signal transmission, fixture will receive channel con-

trol signals which from the starting address.

According to dierent requirements or easy to use, the user

can set many value fixtures to the same address, also can set

up a separate address for every device.

If you set the same address,all the devices will receive from

DMX channels signal. All connecting fixtures are jointly con-

trolled, controller can’t separate control a device.

If you set a dierent address, each device will be separate

from its particular set the starting address and begin accept-

ing DMX512 control signal, so that more convenient separate

control one device.

Using this method must be based on channel quantity of de-

vice to determine a starting address.

This light has 10 channels. When you use 10CH, you should

set the starting address of the first unit to 1, the second unit

to 11(10+1), the third unit to 21 (11+10), and so on.

p. 6THUNDERSTORM

ENGLISH VERSION

Installation

1 Clamp

2 Handle

When install this equipment please make sure there’s no

flammable surfaces (decorated things, etc) within at least

2.5M and maintain minimum distance of 0.5M from the

equipment to the walls.

Please make sure that there’s no other equipment or decorat-

ing materials obstructed the exhaust fan and the vent-pipe.

Products should be install immobility.

In case of safety, it’s very important that to connect the earth

with line.

p. 7THUNDERSTORM

ENGLISH VERSION

Product size

p. 8THUNDERSTORM

ENGLISH VERSION

Descripción

Thunderstorm es un innovador y revolucionario efecto que

combina un moonflower de LED de 6 salidas con un potente

láser y un impactante estrobo; un verdadero todo en uno.

Con 6 LEDs RGBWA+UV, 8 potentes LEDs blancos y un laser

rojo + verde, llegó la hora de redefinir los horizontes. Sus

combinaciones y efectos pre-seteados harán que sus config-

uraciones se destaquen sobre la media. Thundestorm tiene 4

modos de operación (Audiorítmico, automático, DMX & Mae-

stro/Esclavo) y 8 efectos Láser con movimientos extremada-

mente rápidos.

Especificaciones

Fuente & Ópticas

Láser: Rojo: 100m/650nm, Verde: 50mw/532nm

Moonflower: 6 LEDS RGBA+UV de 5W

Strobe: 8 LEDs blancos de 3W

Efectos y funciones

Efecto todo-en-uno: Láser + Moonflower + Estrobo

8 efectos preestablecidos de láser

Efecto estrobo & pulso

15 colores preestablecidos

Dimmer: Rango completo 0-100%

Haces definidos y filosos

Control

Modos de operación: Audiorítmico, automático, DMX & Mae-

stro/Esclavo

Canales DMX: 10

Motor de alta velocidad

Micrófono incorporado

Temperatura de operación: 10ºC~40ºC

Eléctrico

Rango de voltaje de entrada: AC100V~240V 50/60Hz

Consumo de potencia: 50W

Físico

Pantalla LED de 4 dígitos

Conectores de alimentación: Interlock Entrada/Salida

Conectores DMX: 2 conectores XLR (XLR-3 de entrada & salida)

Dimensiones: 304x230x247 mm. / 12x9x9.75 pulg.

Peso: 5 Kg. / 11 Lbs.

p. 9THUNDERSTORM

VERSIÓN ESPAÑOL

Por su propia seguridad, por favor lea atentamente el

manual antes de utilizar el equipo.

ADVERTENCIA DE SEGURIDAD

• Este producto debe ser instalado por un profesional

calificado.

• Toda mantención debe ser llevada a cabo por un electr-

icista calificado.

• Una distancia mínima de 0.5m debe ser mantenida entre

el equipo y cualquier superficie combustible.

• El producto debe ser siempre operado en áreas ventiladas.

• NO mire de forma directa hacia la fuente de luz.

• Siempre desconecte el equipo antes de realizar cualqui-

er tipo de mantención.

• El neutro debe estar siempre conectado a tierra.

• Asegúrese que todas las partes del equipo se mantengan

limpias y libres de polvo.

IMPORTANTE

• Toda persona involucrada con las instalación, operación

y mantenimiento del equipamiento debe estar califica-

da para ello.

• Seguir las instrucciones de este manual.

• Considerar este manual parte del producto.

• Mantener este manual durante toda la vida útil del producto.

• Pasar el presente manual a cada uno de los futuros

dueños de la unidad.

• Descargar la última versión disponible del sitio de inter-

net de la empresa.

DETERMINACIONES DE OPERACIÓN

• Este producto solamente puede ser operado en un volta-

je de 100-240 V, 50/60 Hz.

• Este equipamiento está diseñado para uso profesional.

Por ejemplo: escenarios, clubs, bares y teatros.

• No agite el equipo. Evite la fuerza bruta al instalar o hac-

er funcionar el dispositivo.

• Al elegir el lugar de la instalación, por favor asegúrese de

que el dispositivo no está expuesto a calor extremo, hume-

dad o polvo. No debe haber ningún cable por ahí. Por favor,

asegúrese de que la unidad no puede ser tocada ni golpeada.

• Al usar máquinas de humo, asegúrese de que el dispos-

itivo no está expuesto al chorro de directo de la máqui-

na y de que sea instalado a una distancia mínima de 0,5

metros entre la máquina de humo y el dispositivo.

• La temperatura ambiente debe estar siempre entre -15

° C y + 45 ° C. Mantener alejado del sol directo (especial-

mente en el coche) y calentadores.

• Nunca utilice este dispositivo durante tormentas eléctri-

cas. El Sobre-voltaje podría destruir el dispositivo. Siem-

pre desconecte el aparato durante tormentas eléctricas.

• El equipo sólo se debe instalar sobre una superficie no

inflamable. Con el fin de salvaguardar la ventilación sufi-

ciente, deje 50 cm de espacio libre alrededor del aparato.

• Por instalar el equipo encima de la cabeza (altura de

montaje> 100 cm), siempre fije el aparato con una cuer-

da de seguridad apropiada. Fijar la cuerda de seguridad

sólo en los puntos de fijación correctos. La seguridad de

la cuerda no debe fijarse en las asas de transporte.

• Opere el equipo solamente luego de haber comprobado

que el recinto del mismo está bien cerrado y con todos

los tornillos bien apretados.

• Haga funcionar el aparato sólo después de familiarizarse

con sus funciones. No permitir la utilización por parte

de personas no calificadas para operar el dispositivo. La

mayoría de los daños son el resultado de una operación

poco profesional.

• Por favor, considere que las modificaciones no autorizadas

del aparato están prohibidas por razones de seguridad.

• Nunca quite el código de barras de serie del dispositivo

ya que esto haría que la garantía pierda vigencia.

p. 10THUNDERSTORM

VERSIÓN ESPAÑOL

Inhaltsverzeichnis

Sprachen:

Andere TECshow DJ-Equipment Handbücher

TECshow

TECshow COSMO UV Bedienungsanleitung

TECshow

TECshow UV FLOOD 30 Bedienungsanleitung

TECshow

TECshow FLATSIX Bedienungsanleitung

TECshow

TECshow DERBY LITE Bedienungsanleitung

TECshow

TECshow FRESNELED 3100 MKII Bedienungsanleitung

TECshow

TECshow TWISTER 360 Bedienungsanleitung

TECshow

TECshow ION 280F Bedienungsanleitung

TECshow

TECshow HALO 80 LED Bedienungsanleitung

TECshow

TECshow NAVIGATOR NODE 8 Bedienungsanleitung

TECshow

TECshow Mini Bubble Master Bedienungsanleitung

TECshow

TECshow Mini Hive-10 Bedienungsanleitung

TECshow

TECshow iON 230B Bedienungsanleitung

TECshow

TECshow MadBox XL 3-in-1 Bedienungsanleitung

TECshow

TECshow PROTON 6 HEX USB Bedienungsanleitung

TECshow

TECshow MAGIC CUBE Bedienungsanleitung

TECshow

TECshow BEAMPIX 14 Bedienungsanleitung

TECshow

TECshow UV BAR Bedienungsanleitung

TECshow

TECshow HALO 740 XL Bedienungsanleitung

TECshow

TECshow MasterPAR Bedienungsanleitung

TECshow

TECshow NEBULA TRI Bedienungsanleitung

TECshow

TECshow Quatrobeam Move Bedienungsanleitung

TECshow

TECshow NEBULA PAR 162 Bedienungsanleitung

TECshow

TECshow NEBULA MAX 240 Bedienungsanleitung

TECshow

TECshow COSMO QUAD 6 DMX Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung