Tegam 110A Bedienungsanleitung

10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110

• [email protected]

110A

Safety Voltmeter

MODEL 110A

Instruction Manual

PN# 110A-901-01E

Publication Date: January 2018

REV. F

NOTE: This User’s Manual was as current as possible when this product was manufactured. However,

products are constantly being updated and improved. To ensure you have the latest documentation,

refer to www.tegam.com

10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110

• [email protected]

110A

10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110

• [email protected]

TABLE OF CONTENTS

INSTRUMENT

SCRIPT

ON ......................................................

....................................................

ACCESSORIES SHEET .................................................1-4

PREPARATION FOR USE

UNPACKING AND INSPECTION

.................................

PREPARATION FOR USE

............................................

OPERATION...........................................................2-1

OPERATING CONDITIONS........................................2-2

FRONT PANEL ........................................................2-3

SAFETY AND MAINTENANCE

SAFETY SYMBOLS AND TERMS

.................................

OPTIONAL SAFETY TESTS........................................3-3

MAINTENANCE INFORMATION..................................3-5

Test Lead Replacement .....................................3-5

FUNCTIONALITY CHECKS ........................................3-6

PERFORMANCE VERIFICATION .................................3-7

BATTERY INSTALLATION/REPLACEMENT....................3-8

CLEANING INSTRUCTIONS ......................................3-9

SERVICE INFORMATION

PREPARATION FOR CALIBRATION OR REPAIR ............4

EXPEDITE REPAIR & CALIBRATION FORM...................4

WARRANTY............................................................4-3

10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110

• [email protected]

1-1

INSTRUMENT DESCRIPTION

SECTION 1

INSTRUMENT DESCRIPTION

INTRODUCTION

The Model 110A Safety Voltmeter is the only single switch,

single range, digital voltmeter that automatically measures

AC & DC volts to 1000 V for voltage troubleshooting, line

clearing, lock out/tag out procedures and anywhere

hazardous voltages may be present. The 110A has a 1 MΩ

current limiting resistor in each lead to protect the user

against arc-flash potential.

Model 110A meets Category IV 600 V and Category III 1000

V Overvoltage protection under IEC-61010-1.

SPECIFICATIONS

10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110

• [email protected]

1-2

INSTRUMENT DESCRIPTION

FUNCTIONS: VDC/VAC, with automatic selection. When both DC

and AC input voltages are present, the voltage type with the higher

magnitude is selected and displayed.

RANGES: ±1000 VDC. 1000 VAC (45-500 Hz, average responding,

calibrated in RMS of a sine wave).

RESOLUTION: 1 V

ACCURACY: ±(0.2% rdg + 1 volt), DC, 50-60 Hz, 64 to 82 °F.

MAXIMUM ALLOWABLE INPUT: 1000 volts continuous. Overload

annunciator (OL) turns on above 999 volts.

OVERVOLTAGE TEST: High Pot tested at 2500 VAC for < 5 sec.

NORMAL MODE REJECTION: AC Rejection (VDC Mode): > 40 dB.

DC Rejection (VAC Mode): 40 dB typ. (for DC voltage < 10% peak

AC voltage).

READING RATE: 2.5 readings/second

INPUT RESISTANCE: 10 MΩ(8 MΩin voltmeter, 1 MΩin each

attached input probe)

DISPLAY: 0.5” LCD (3 ½ digits), polarity, and annunciators for

VAC, VDC, OL, Low Battery.

INPUT PROBES: Permanently attached to voltmeter. Sheathed tips

with retracting sleeves. PVC insulated leads, 36” long.

POWER: 9 V alkaline or carbon-zinc battery (NEDA 1604).

BATTERY LIFE: 200 hours typical, alkaline.

ENVIRONMENTAL LIMITS FOR OPERATING: –10 to 150 °F, less

10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110

• [email protected]

1-3

INSTRUMENT DESCRIPTION

than 80% R.H. up to 95 °F. Reduce R.H. limit by 1.7% per °F above

95 °F.

ENVIRONMENTAL LIMITS FOR STORAGE: –30 to 150 °F, less

than 90% R.H. up to 95 °F. Reduce RH limit by 1.7% per °F above

95 °F.

ENVIRONMENTAL/TIME LIMITS TO ACCURACY: 64° to 82 °F,

80% R.H., 1 year.

TEMPERATURE COEFFICIENT: From 64 °F to 82 °F; included in

accuracy specifications. Below 64 °F and above 82 °F; less than

0.05 times applicable specifications per °F.

LOW-BATTERY INDICATOR: Display indicates ‘BAT’ when less

than 10% of life remains.

AUTOMATIC TURN-OFF: Voltmeter turns off after 10 minutes of

operation. Turns off below 6.5 V battery voltage.

SIZE: 6.3” x 2.7” x 1.2”

WEIGHT: 12 oz.

CONSTRUCTION: Heavy-duty ABS plastic housing.

INCLUDED ACCESSORIES: Battery, Operating Instructions.

ACCESSORIES SHEET

10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110

• [email protected]

1-4

INSTRUMENT DESCRIPTION

1104 - Leather Utility Belt Carrying Case

The 1104 case protects your voltmeter and probes from broken

displays and other damages that can occur. This case has a 2 in. belt

loop. It is long lasting, super durable, and is made from top-grain

cowhide with riveted seams.

1204 - Cordura Nylon lineman’s Carrying Case

The 1204 case protects your voltmeter and saves you time because the

meter can stay in the case during use. It features a window to access

the ON/OFF switch, a retainer that holds the meter in place, space for

probe storage and a 22 in. shoulder strap. It also comes with a belt clip

and can be worn on a utility belt. Size- 5 ½ x 7 ½x 1 ½ in. (W x H x

D).

10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110

• [email protected]

1-5

INSTRUMENT DESCRIPTION

12501 - Alligator Clip Adapter

The 12501 probe adapter kit allows you to convert your test leads to

alligator clips. The kit includes two screw-on probe adapters and two

heavy duty screw in alligator clips with insulating rubber boots. These

alligator clips open to ½ in. and fit most terminals and bus bars.

12502 - Universal Adapter Kit

The 12502 probe adapter kit includes two screw-on probe adapters and

interchangeable screw-in accessories including two alligator clips with

insulating rubber boots, two banana plugs, two needle tips, two spade

lugs and two heavy duty tips. With this kit you can adapt your

voltmeter to the many different situations you encounter on the job.

PN 110-404

Replacement probe/test-lead set (1 red, 1 black) for Model 110A.

10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110

• [email protected]

2-1

PREPARATION FOR USE

SECTION 2

PREPARATION FOR USE

UNPACKING AND INSPECTION

Each instrument is inspected both mechanically and electrically

before shipment. Upon receiving your instrument unpack all items

from the shipping container and check for any obvious damage that

may have occurred during transit. Report any damage to the

shipping agent. Retain and use the original packing materials if

reshipment is necessary.

PREPARATION FOR USE

Each instrument is supplied with a 9 V battery. See page 3-8 of this

manual for battery installation instructions.

OPERATION

The Model 110A digital voltmeter (DVM) is easy to use. There is

only one control (located on the side of the instrument) that turns

the instrument ON/OFF (Figure 1).

After turn-on, the instrument automatically selects either VDC or

VAC function. VDC is selected if the magnitude of a DC input

voltage is greater than the peak value of any AC voltage present.

Otherwise the VAC function is enabled. VAC and VDC annunciators

in the liquid crystal display indicate the selected function. Observe

the maximum allowable input (1000 V continuous).

After approximately 10 minutes, the voltmeter turns off

automatically to conserve battery life. To turn the voltmeter on

10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110

• [email protected]

2-2

PREPARATION FOR USE

again, return the ON/OFF switch to the OFF position, and then back

to the ON position.

When battery voltage drops below 6.5 V, the voltmeter turns off

until a new battery is installed (Refer to Battery Installation

Section).

OPERATING CONDITIONS

In accordance with the Standard for Electrical Measuring and Test

Equipment IEC-61010-1, the TEGAM Model 110A Safety Voltmeter

is designed for safe operation under the following conditions:

•Indoor use, or outdoor use in where the instrument and probes

remain dry (i.e. protected from exposure to rain, fluids, or

condensing humidity).

•Altitudes up to 2000 m above mean sea-level.

•Temperature: –23 °C to 65 °C

•Relative humidity: 80% R.H. up to 35 °C, decreasing linearly

to 0% R.H. at 60 °C.

•Power source: 9 V transistor battery (NEDA 1604), alkaline or

carbon-zinc type. The voltmeter automatically turns off before

battery discharge can cause malfunction.

•Pollution: Degree 2 per IEC 664.

•Installation Category IV (up to 600 V) / Category III (up to

1000 V)

Inhaltsverzeichnis

Andere Tegam Messgerät Handbücher

Tegam

Tegam R1L-BI Bedienungsanleitung

Tegam

Tegam GEMINI 5541A Bedienungsanleitung

Tegam

Tegam R1M-A Bedienungsanleitung

Tegam

Tegam 3550 Bedienungsanleitung

Tegam

Tegam 1750 Bedienungsanleitung

Tegam

Tegam R1L-D1 Bedienungsanleitung

Tegam

Tegam R1L-BIR1 Bedienungsanleitung

Tegam

Tegam 730A Bedienungsanleitung

Tegam

Tegam R1L-BR1 Bedienungsanleitung

Tegam

Tegam 720A Bedienungsanleitung

Tegam

Tegam 1316A Bedienungsanleitung

Tegam

Tegam 710A Bedienungsanleitung

Tegam

Tegam R1L-E2A Bedienungsanleitung

Tegam

Tegam 252 Bedienungsanleitung

Tegam

Tegam 253 Bedienungsanleitung

Tegam

Tegam 720A Bedienungsanleitung

Tegam

Tegam 3525 Bedienungsanleitung

Tegam

Tegam R1L-B Bedienungsanleitung

Tegam

Tegam 710A Bedienungsanleitung

Tegam

Tegam 1830A Fehlerbehebungshandbuch

Tegam

Tegam 1806 Bedienungsanleitung

Tegam

Tegam Advanced Energy GEMINI 5540A Bedienungsanleitung

Tegam

Tegam AVM-2000 Fehlerbehebungshandbuch

Tegam

Tegam 710A Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung