Teknik 5425907 Bedienungsanleitung

Steel Gorge Desk Milled Mesquite

Model 5425907

Sit and surf.

Teknik

www.teknikoffice.co.uk

Table of Contents Assembly Tools Required

5-28

29-32

33-36

37-38

Part Identiﬁcation

Hardware Identiﬁcation

Assembly Steps

Français

Español

Safety

Warranty

No. 2 Phillips Screwdriver

Tip Shown Actual Size

Skip the power trip.

This time.

Page 2

Part Identiﬁcation

åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge

to help distinguish similar parts from each other. Use this part identiﬁcation to help identify similar parts.

A RIGHT LEG (1)

B LEFT LEG (1)

C CENTER LEG (1)

D TOP (1)

E RIGHT END (1)

F CENTER END (1)

G CENTER UPRIGHT (1)

H LEFT UPRIGHT (1)

I BACK (1)

J LARGE BACK (1)

K SHELF (1)

L LARGE EXTENSION BLOCK (2)

M SMALL EXTENSION BLOCK (2)

N BRACE (1)

O LONG BRACE (2)

P SHORT BRACE (2)

Q LARGE DRAWER RIGHT SIDE (1)

R LARGE DRAWER LEFT SIDE (1)

S LARGE DRAWER BACK (1)

T LARGE DRAWER BOTTOM (1)

U DRAWER RIGHT SIDE (1)

V DRAWER LEFT SIDE (1)

W DRAWER BACK (1)

X DRAWER BOTTOM (1)

Y DRAWER BRACE (1)

Z DRAWER FRONT (1)

AA LARGE DRAWER FRONT (1)

Now you know

our ABCs.

Page 3

Hardware Identiﬁcation

åScrews are shown actual size. You may receive extra hardware with your unit.

BLACK 1-3/4" PAN HEAD SCREW - 10

13 BLACK 1" PAN HEAD SCREW - 4

BLACK 1" FLAT HEAD SCREW - 8

BLACK 1/2" FLAT HEAD SCREW - 12

BLACK 5/16" MACHINE SCREW - 1

BLACK 11/16" FLAT HEAD SCREW - 4

BLACK 1/2" PAN HEAD SCREW - 22

BLACK 1/2" MACHINE SCREW - 4

NUT - 1

WOOD DOWEL - 4

METAL BRACKET - 6

9TOOL - 1

Page 4

HIDDEN CAM - 12

5SMALL HIDDEN

CAM - 12

6CAM SCREW - 24

4EXTENSION SLIDE - 2

3EXTENSION RAIL - 2

(EXTENSION SET SHOWN SEPARATED)

1LEFT RAIL - 1 2RIGHT RAIL - 1

KNOB SET - 2

10 BUMPER

CARD - 1

BLACK 1" MACHINE SCREW - 2

Step 1

å Assemble your unit on a carpeted ﬂoor or on the empty

carton to avoid scratching your unit or the ﬂoor.

å Fasten the LEFT LEG (B) to the LEFT UPRIGHT (H). Use

two BLACK 1-3/4" PAN HEAD SCREWS (13) and two

BLACK 1/2" PAN HEAD SCREWS (18).

Page 5

BLACK 1/2" PAN HEAD SCREW

(2 used in this step)

Edge with holes

Surface with holes

BLACK 1-3/4" PAN HEAD SCREW

(2 used in this step)

Holes facing up

Step 2

å Fasten the LEFT RAIL (1) and one of the SMALL

EXTENSION BLOCKS (M) to the LEFT UPRIGHT (H)

exactly as shown. Use two BLACK 11/16" FLAT

HEAD SCREWS (16).

å NOTE: Find the back hole ﬁrst. Then, slide the inner

cartridge of the LEFT RAIL in to ﬁnd the other hole that

lines up with the hole in the SMALL EXTENSION BLOCK

and LEFT UPRIGHT. Turn a SCREW into this hole.

å NOTE: You should start each SCREW a few turns before

completely tightening any of them.

Page 6

BLACK 11/16" FLAT HEAD SCREW

(2 used in this step)

These edges

should be even.

This hole is closer

to this edge.

Line up the

back hole ﬁrst.

Finished surface

Holes facing up

å Fasten four METAL BRACKETS (9) to the CENTER

LEG (C) exactly as shown. Use four BLACK 1/2" PAN

HEAD SCREWS (18).

Step 3

Page 7

BLACK 1/2" PAN HEAD SCREW

(4 used in this step)

Step 4

å Fasten the CENTER LEG (C) to the CENTER END (F) and

CENTER UPRIGHT (G). Use four BLACK 1/2" PAN HEAD

SCREWS (18) through the METAL BRACKETS on the CENTER

LEG and into the CENTER END and CENTER UPRIGHT.

å Finish fastening the CENTER LEG (C) to the CENTER END (F)

and CENTER UPRIGHT (G). Use four BLACK 1-3/4" PAN

HEAD SCREWS (13).

å Turn two CAM SCREWS (7) into the CENTER END (F).

Page 8

BLACK 1/2" PAN HEAD SCREW

(4 used in this step)

BLACK 1-3/4" PAN HEAD SCREW

(4 used in this step)

Surface with holes

Surface with

fewer holes

Edge without holes

å Fasten one of the LARGE EXTENSION BLOCKS (L) to the

CENTER END (F). Use two BLACK 1" PAN HEAD SCREWS (14)

in the outer holes.

Step 5

Page 9

Surface with

more holes

This hole is closer

to this edge.

BLACK 1" PAN HEAD SCREW

(2 used in this step)

Step 6

å Carefully ﬂip the CENTER LEG (C) over.

å Fasten the RIGHT RAIL (2) and the remaining SMALL

EXTENSION BLOCK (M) to the CENTER UPRIGHT (G) exactly

as shown. Use two BLACK 11/16" FLAT HEAD SCREWS (16).

å NOTE: Find the back hole ﬁrst. Then, slide the inner cartridge

of the RIGHT RAIL in to ﬁnd the other hole that lines up with

the hole in the SMALL EXTENSION BLOCK and CENTER

UPRIGHT. Turn a SCREW into this hole.

Page 10

BLACK 11/16" FLAT HEAD SCREW

(2 used in this step)

These edges

should be even.

This hole is closer

to this edge.

Line up the

back hole ﬁrst.

Finished surface

Inhaltsverzeichnis

Andere Teknik Inneneinrichtung Handbücher

Teknik

Teknik Canyon Lane 5425306 Bedienungsanleitung

Teknik

Teknik 5427427 Bedienungsanleitung

Teknik

Teknik Louvre 5415109 Bedienungsanleitung

Teknik

Teknik Scribed Oak Storage Desk 5418294 Bedienungsanleitung

Teknik

Teknik Canal Heights Coffee Table 5419233 Bedienungsanleitung

Teknik

Teknik 5420173 Bedienungsanleitung

Teknik

Teknik Mahattan View 5423446 Bedienungsanleitung

Teknik

Teknik Trestle 5410421 Bedienungsanleitung

Teknik

Teknik 5417593 Bedienungsanleitung

Teknik

Teknik 5426510 Bedienungsanleitung

Teknik

Teknik Craft 5427456 Bedienungsanleitung

Teknik

Teknik Elstree 5426909 Bedienungsanleitung

Teknik

Teknik Elstree L-Shaped Desk 5426914 Bedienungsanleitung

Teknik

Teknik Barrister Home Credenza 5421458 Bedienungsanleitung

Teknik

Teknik 5412314 Bedienungsanleitung

Teknik

Teknik 5158097 Bedienungsanleitung

Teknik

Teknik Hampstead Park 5423704 Bedienungsanleitung

Teknik

Teknik Barrister Home 5418902 Bedienungsanleitung

Teknik

Teknik Barrister Home 3 Drawer Chest 5418702 Bedienungsanleitung

Teknik

Teknik Clifton Place 5421116 Bedienungsanleitung

Teknik

Teknik Scribed Oak Desk 5414836 Bedienungsanleitung

Teknik

Teknik 5424933 Bedienungsanleitung

Teknik

Teknik Canal Heights 5419231 Bedienungsanleitung

Teknik

Teknik Canyon Lane 5425302 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung