Tektronix 80A01 Bedienungsanleitung

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

User Manual

80A01

Trigger Prescale Limiting Preamplifier Module

071-0873-00

This document applies to firmware version 1.1.0

and above.

www.tektronix.com

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes

that in all previously published material. Specifications and price change privileges reserved.

Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077-0001

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

80A01 Trigger Prescale Preamplifier Module

Instrument Software Requirements

The 80A01 prescaled trigger amplifier was designed to be used with software

release versions 1.1.0 and later of the 8000 series sampling oscilloscope

application. If your instrument is running a release prior to version 1.1.0,

Tektronix recommends that you upgrade your instrument to the latest version.

To determine the software version running on your CSA8000 or TDS8000, select

About TDS/CSA in the Help menu from the user interface. This command

displays the About TDS/CSA dialog which lists the current software version

number.

If you find that you are running an older version of software, please visit the

Tektronix website at http://www.tektronix.com to find out how to get an upgrade

version mailed to you. When you visit the Tektronix website, select the Oscillo-

scopes page. You will find upgrade information there.

While the 80A01 was designed to be used with software release 1.1.0 or later, it

can be used with earlier versions of the software with the following limitations

and non-standard behavior:

1. If the 80A01 is inserted in the left-most small slot (labeled CH1 / CH2) of

the TDS/CSA8000 and at least one optical module is present, the 80A01 will

behave normally.

2. If the 80A01 is inserted in any other slot or there are no optical modules

present, the following behavior will be seen:

a. The instrument will behave as if the odd-numbered channel for the slot

in which the 80A01 is inserted is available for acquisition. Thus if the

module is inserted in the right-most small slot, the TDS/CSA8000 will

believe that it can acquire data on Channel 7. Turning on acquisition on

this ”pseudo-channel” will result in a waveform being acquired from a

floating input. This pseudo-waveform will appear as a DC level with all

points having amplitude approximately equal to zero.

b. The System Properties dialog (accessed by selecting System Properties

from the Utilities menu in the user interface) may contain incorrect

information.

In either scenario (1. or 2.), the actual performance of the 80A01 in amplifying

RF signals is not degraded.

Determining which

software version your

instrument has

How to get an upgrade

Using earlier versions

of software with your

80A01 module

–II –

WARRANTY

Tektronix warrants that the products that it manufactures and sells will be free from defects in materials and workmanship

for a period of one (1) year from the date of shipment. If a product proves defective during this warranty period, Tektronix,

at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in

exchange for the defective product.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the

warranty period and make suitable arrangements for the performance of service. Customer shall be responsible for

packaging and shipping the defective product to the service center designated by Tektronix, with shipping charges prepaid.

Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which the

Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any

other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate

maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage resulting

from attempts by personnel other than Tektronix representatives to install, repair or service the product; b) to repair

damage resulting from improper use or connection to incompatible equipment; c) to repair any damage or malfunction

caused by the use of non-Tektronix supplies; or d) to service a product that has been modified or integrated with other

products when the effect of such modification or integration increases the time or difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR

IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY TO

REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO

THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE

OF WHETHER TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH

DAMAGES.

80A01 Trigger Prescale Limiting Preamplifier Module User Manual i

Table of Contents

List of Figures ii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

List of Tables ii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General Safety Summary iii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preface v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Manual Structure v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Related Manuals v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contacting Tektronix vi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Getting Started 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Product Description 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Options and Accessories 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Electrostatic Discharge 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Static Controlled Workstation 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating Basics 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Usage 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Front Panel 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input and Output Connectors 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power LED 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System Interaction 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Programmer Interface Commands 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

User Adjustments 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Glossary 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Index 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

ii 80A01 Trigger Prescale Limiting Preamplifier Module User Manual

List of Figures

Figure 1: 80A01 module block diagram 2. . . . . . . . . . . . . . . . . . . . . . . .

Figure 2: Installing a module 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Figure 3: 80A01 module front panel 7. . . . . . . . . . . . . . . . . . . . . . . . . . .

List of Tables

Table 1: 80A01 module characteristics 1. . . . . . . . . . . . . . . . . . . . . . . . .

Table 2: Standard accessories 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 3: Optional accessories 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4: Module characteristics 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 5: Environmental specifications 10. . . . . . . . . . . . . . . . . . . . . . . . .

Table 6: Mechanical specifications 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 7: Electromagnetic specifications 10. . . . . . . . . . . . . . . . . . . . . . . .

80A01 Trigger Prescale Limiting Preamplifier Module User Manual iii

General Safety Summary

Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it. To avoid potential hazards, use this

product only as specified.

Only qualified personnel should perform service procedures.

While using this product, you may need to access other parts of the system. Read

the General Safety Summary in other system manuals for warnings and cautions

related to operating the system.

Ground the Product. This product is indirectly grounded through the grounding

conductor of the mainframe power cord. To avoid electric shock, the grounding

conductor must be connected to earth ground. Before making connections to the

input or output terminals of the product, ensure that the product is properly

grounded.

Observe All Terminal Ratings. To avoid fire or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings

information before making connections to the product.

Do Not Operate Without Covers. Do not operate this product with covers or panels

removed.

Avoid Exposed Circuitry. Do not touch exposed connections and components

when power is present.

Do Not Operate With SuspectedFailures. If you suspect there is damage to this

product, have it inspected by qualified service personnel.

Do Not Operate in Wet/DampConditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Terms in this Manual. These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that could result

in injury or loss of life.

CAUTION. Caution statements identify conditions or practices that could result in

damage to this product or other property.

To Avoid Fire or

Personal Injury

Symbols and Terms

General Safety Summary

iv 80A01 Trigger Prescale Limiting Preamplifier Module User Manual

Terms on the Product. These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you read the

marking.

WARNING indicates an injury hazard not immediately accessible as you read the

marking.

CAUTION indicates a hazard to property including the product.

Symbols on the Product. The following symbols may appear on the product:

CAUTION

Refer to Manual WARNING

High Voltage ProtectiveGround

(Earth) Terminal

Inhaltsverzeichnis

Andere Tektronix Steuereinheit Handbücher

Tektronix

Tektronix VX4790A Bedienungsanleitung

Tektronix

Tektronix VX4521 Bedienungsanleitung

Tektronix

Tektronix VX4237 Bedienungsanleitung

Tektronix

Tektronix TM 504 Bedienungsanleitung

Tektronix

Tektronix TM 506 Bedienungsanleitung

Tektronix

Tektronix 3B5 Bedienungsanleitung

Tektronix

Tektronix VX4342 Bedienungsanleitung

Tektronix

Tektronix 80C14 Bedienungsanleitung

Tektronix

Tektronix 73A-541 Bedienungsanleitung

Tektronix

Tektronix TLA7B Series Bedienungsanleitung

Tektronix

Tektronix 7A21N Bedienungsanleitung

Tektronix

Tektronix ECO8000 Series Bedienungsanleitung

Tektronix

Tektronix TDS3LIM Bedienungsanleitung

Tektronix

Tektronix ECO422D Gebrauchs- und Pflegehandbuch

Tektronix

Tektronix VX4240 Bedienungsanleitung

Tektronix

Tektronix TM 503 Bedienungsanleitung

Tektronix

Tektronix ECO170A Bedienungsanleitung

Tektronix

Tektronix 7D11 Bedienungsanleitung

Tektronix

Tektronix TDS3TMT Bedienungsanleitung

Tektronix

Tektronix DAS MTIF Bedienungsanleitung

Tektronix

Tektronix KEITHLEY 7703 Bedienungsanleitung

Tektronix

Tektronix 7B15 Bedienungsanleitung

Tektronix

Tektronix TDS3FFT Bedienungsanleitung

Tektronix

Tektronix TM 506A Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung