Tektronix RSA306 Bedienungsanleitung

General safety summary Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it.

To avoid potential hazards, use this product only as speciﬁed.

Only qualiﬁed personnel should perform service procedures.

To avoid damage to

equipment and personal

injury

Do not exceed rackmount weight ratings. Use this rackmount kit only for

RSA306B and RSA306 instruments and instrument controllers.

If you install an instrument controller in the area behind the mounted

instrument(s), weight and environmental restrictions apply.

In a static environment (such as an ofﬁce or manufacturing facility), the total

additional weight should not exceed 5 lbs (2.27 kg).

In a dynamic environment (such as a truck or airplane), no additional weight

should be added (no instrument controller(s) should be added).

Use proper hardware. Do not interchange hardware. Use only speciﬁed mounting

screws.

Use care when installing and removing product from rack. Avoid pinching

ﬁngers and hands when installing and removing. Do not force the product when

installing. Gently pull the product out when removing.

Use only with speciﬁed products. Do not use rackmount on products for which

it was not intended. Refer to individual product manuals for details or contact

Tektronix Customer Service when in doubt.

Contacting Tektronix Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tek.com to ﬁnd contacts in your area.

www.tek.com

*P075109400*

075-1094-00

Kit description

The rackmount kit is a collection of parts that, once installed, holds one or two

RSA306 or RSA306B Real-Time Spectrum Analyzers, for mounting into a

standard 19-inch equipment rack. You will need a Phillips #2 screwdriver and a

3/8 inch nut driver (wrench or socket) to complete the installation.

2 RSA306B Rackmount Kit Installation

Kit description

Kit parts list

The following table lists the parts contained in this kit. Use the associated ﬁgure

to identify the parts and to assemble the kit. (See Figure 1.)

Table 1: RSA306BRACK rackmount kit parts list

Item

no. Name and description Qty.

1BRACKET, FRONT 1

2BRACKET, CLOSURE, FRONT 1

3BRACKET, MAIN 1

4BRACKET, STATIONARY RACK, REAR 2

5BRACKET, CLOSURE, FRONT MIDDLE 2

6 Bag containing screws and nuts 1

Figure 1: Rackmount kit assembly

RSA306B Rackmount Kit Installation 3

Kit description

Installation

The rack frame comes completely assembled with the face plate and closure plate

in place. Use the following procedure and refer to the illustration to assemble the

rackmount hardware and install the instrument into the rack. (See Figure 1.)

1. Remove the front bracket (item 1) and front closure bracket (item 2) by

unscrewing the four thumb screws.

2. Attach the RSA306B preassembled main bracket (item 3) into your rack

chassis using four 10-32 screws.

4 RSA306B Rackmount Kit Installation

Kit description

3. Attach the stationary brackets (item 4) to the rear rack using two 10-32

screws, one on each side.

4. Connect the stationary brackets (item 4) to the RSA306B main bracket (item

3) using four 10-32 screws and nuts, two sets per bracket.

5. Insert the RSA306 or RSA306B instrument(s) into the rackmount.

RSA306B Rackmount Kit Installation 5

Kit description

6. Reinstall the front bracket (item 1) and front closure bracket (item 2).

a. If installing one instrument: Reinstall the front bracket (item 1) by starting

the threads of the two thumb screws on either side of the instrument.

Reinstall the front closure bracket (item 2) by slipping it behind the front

bracket (item 1) and starting the threads of the thumb screws that go

through the holes provided in the closure bracket (item 2). Tighten all

four thumb screws.

b. If installing two instruments: Reinstall the front bracket (item 1) by

starting the threads of all four thumbscrews,andthentighteningall

four thumb screws.

7. You can now run cables through the center pass-through opening. If you are

not running cables through the pass-through opening, install the front middle

closure bracket (item 5) using two 10-32 nuts.

6 RSA306B Rackmount Kit Installation

Andere Handbücher für RSA306

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tektronix Messgerät Handbücher

Tektronix

Tektronix 2715 Bedienungsanleitung

Tektronix

Tektronix RSA7100A Handbuch

Tektronix

Tektronix THM550 Bedienungsanleitung

Tektronix

Tektronix S-1 Bedienungsanleitung

Tektronix

Tektronix WFM8300 Administratorhandbuch

Tektronix

Tektronix TekScope THS 710 Bedienungsanleitung

Tektronix

Tektronix Keithley SourceMeter 2461 Bedienungsanleitung

Tektronix

Tektronix PA4000 Series Montage- und Bedienungsanleitung

Tektronix

Tektronix TDP3500 Gebrauchs- und Pflegehandbuch

Tektronix

Tektronix TriMode P7520A Bedienungsanleitung

Tektronix

Tektronix 4923 Bedienungsanleitung

Tektronix

Tektronix 7D01 Bedienungsanleitung

Tektronix

Tektronix TAP1500 Bedienungsanleitung

Tektronix

Tektronix 6 series Benutzerhandbuch

Tektronix

Tektronix MTS300 Bedienungsanleitung

Tektronix

Tektronix CSA8000B Series Bedienungsanleitung

Tektronix

Tektronix WVR5200 Series Gebrauchs- und Pflegehandbuch

Tektronix

Tektronix 7D01 Referenzhandbuch

Tektronix

Tektronix 1L30 Bedienungsanleitung

Tektronix

Tektronix VM700T Bedienungsanleitung

Tektronix

Tektronix WCA230A Bedienungs- und Wartungshandbuch

Tektronix

Tektronix TPS2PWR1 Bedienungsanleitung

Tektronix

Tektronix Keithley 2601B-PULSE Bedienungsanleitung

Tektronix

Tektronix 491 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung