Teletype 1451 Bedienungsanleitung

TeleType PassiveTracker II

(Part #1451)

User Manual

TeleType Co.

20 Park Plaza

Boston, MA 02116

617-542-6220

Table of Contents

1. Introduction………………………………………………………………….…….2

1.1 Package Contents……………………………………………………….…..2

1.2 Main Features………………………………………………………….……2

1.3 Possible Applications………………………………………………….…….2

2. Connecting PassiveTracker II………………………………………………….…3

3. Setup…………………………………………………………………………….….3

3.1 Getting Started……………………………………………………………...3

3.2 Software Installation.…………………………………………………...…..4

3.3 GPS USB Driver Installation………………………………………………4

3.4 Operation…………………………………………………………………....5

3.5 Enabling Track Menu……………………………………………………....9

4. Upload Trip Data…………………………………………………………………11

4.1 Loading and viewing the log file on the TeleType GPS Map…………....11

5. Advanced Operations…………………………………………………………….14

5.1 Password Command List………………………………………………….14

5.2 Data Log Command List………………………………………………….15

6. Creating Reports From Past Logs………………………………………………16

7. Error Messages and Troubleshooting…………………………………………...19

8. Technical Specifications………………………………………………………….20

1. Introduction

The PassiveTracker II (1451) Trip Recorder is a unique, user-friendly device with a

USB interface for collecting data. The PassiveTracker II allows you to record location

coordinates (latitude and longitude). These coordinates can later be downloaded to a

desktop or laptop computer for display using the TeleType GPS mapping program.

1.1 Package Contents:

Before you start up, make sure that your package includes the following items:

PassiveTracker II Hardware:

 Main unit (PassiveTracker II)

 USB to USB cable

 110V A/C adaptor to PassiveTracker II

 Car Charger (Part # 9121)

 External Antenna

PassiveTracker II Software:

 TeleType GPS tracking software, including Download.dll

1.2 Main Features:

 Easy to use USB connector to PC

 Built-in patch antenna

 Fast TTFF and low power consumption

 On-board rechargeable battery sustained real-time clock and memory

for fast satellite acquisition during power-up

 Automatic cold start with no user initialization required

 Large capacity for continuous records for up to 9,000 positions

1.3 Possible Applications

 Land/Marine Navigation

 Telematics

 Fleet Management

 Asset Tracking

 Timing Reference

2. Connecting PassiveTracker II

How to connect PassiveTracker II to receive power in your car (cigarette lighter):

On/Off Switch:

The PassiveTracker II has an on/off hardware switch. This switch is labeled 0-1.

0 signifies off, and 1 signifies that the unit is on. Push the switch right to turn the

unit on, and left to turn it off.

Understanding PassiveTracker II signal lights:

 Red LED: if the red light is blinking, the unit has power

 Green LED: if the green light is on, the unit is being charged

3. Setup

3.1 Getting started:

1. Install the TeleType GPS application from the appropriate CD.

2. Connect USB cable from the PassiveTracker II to your PC. [Figure 1]

3. Install PassiveTracker II software to your PC (See 3.2 Installation)

4. Charge your PassiveTracker II for 4 hours prior to use. The PassiveTracker

II has a 7 hour battery life.

3.2 Software Installation

1. Make sure that the PassiveTracker II hardware is set up correctly [See Figure

1].

2. Insert the PassiveTracker II CD into your PC.

3. Go to My Computer E: Drive (CD).

4. Right click on the E: Drive and select “Open”.

5. Double click on “Shortcut to setup.exe”.

6. Follow the prompts to install PassiveTracker II onto your PC.

3.3 GPS USB Driver Installation

1. Make sure that the PassiveTracker II hardware is set up correctly [See Figure

1].

2. Insert the PassiveTracker II CD into your PC.

3. Go to My Computer E: Drive (CD).

4. Right click on the E: Drive and select “Open”.

5. Double click on the folder “USB_driver_CP2101”.

6. Double click the “Setup.exe” icon [Figure 2].

Figure 2 – Setup.exe Icon

7. Press the button “Install” [Figure 3].

Figure 3 – Install Driver

8. Press the button “OK” [Figure 4].

Figure 4 – Successful USB Driver Installation

3.4 Operation

1. Make sure that the PassiveTracker II is connected to your PC using the USB

cable.

2. Check for the correct com port and baud rate by following these instructions:

a. Go to My Computer [Figure 5] Control Panel System.

Figure 5 – Start Menu Icon

b. Under System Properties, click on the Hardware tab [Figure 6].

Figure 6 – System Properties Window

c. Under the Hardware tab, click on the Device Manager button.

d. You will see a list of devices. Under “Ports”, you will see “USB to

Serial Bridge”. Right click on “USB to Serial Bridge” and click on

“Install”.

e. You will see a screen called “Found New Hardware Wizard” [Figure

7]. Click on “Yes, this time only”, and then press “Next”.

Figure 7 – New Hardware Wizard

f. Make sure the bullet “Install the software automatically

(recommended)” is clicked. Click “Next” [Figure 8].

Figure 8 – Hardware Update Wizard

g. Click the button “Finish”.

h. Next you will need to check the COM port and baud rate (bits per

second).

 To check which COM port the USB is running on, go to Ports

“USB to Serial Bridge” (ComX). “X” represents the COM

port number [Figure 10]. If the COM Port is higher than 10,

you need to follow these steps:

o Right click on “USB to Serial Bridge” [Figure 10].

o Go to “Properties” and click on the tab “Port settings”.

o Click on the “Advanced” button [Figure 9].

Figure 9 – Advanced Port Settings

o Next to “COM Port Number”, you will see a list box

with a list of COM port numbers.

o Choose a COM which is less than, or equal to 10. If

you are able to, choose COM2, as it is the preferred

port for the PassiveTracker II. In some cases it might

say port in use. If you are not aware of any device

using the port, then select COM2 anyways.

Figure 10 – Device Manager Window

3. To obtain recorded log information from the PassiveTracker II, complete

the following steps:

a) Open the PassiveTracker II application, and choose the “To

Datalog” option [Figure 11].

Figure 11 – PassiveTracker II Basic Menu

b) Confirm the Com Port and then hit the “Connect” button. If the

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Teletype GPS Handbücher

Teletype

Teletype WorldNav 5100 Installationshandbuch

Teletype

Teletype 2951 Series Bedienungsanleitung

Teletype

Teletype Bluetooth GPS Receiver Bedienungsanleitung

Teletype

Teletype 2851 Series Bedienungsanleitung

Teletype

Teletype 1390 Bedienungsanleitung

Teletype

Teletype WorldNav 3500 Installationshandbuch

Teletype

Teletype 1951 Bedienungsanleitung

Teletype

Teletype WorldNav 3300 Bedienungsanleitung

Teletype

Teletype GPS Marine Bedienungsanleitung

Teletype

Teletype 1250 Bedienungsanleitung

Teletype

Teletype 1240 Bedienungsanleitung

Teletype

Teletype PocketTracker 1442 Montage- und Bedienungsanleitung

Teletype

Teletype WorldNav 4300 Bedienungsanleitung

Teletype

Teletype WorldNav 7300 Installationshandbuch

Teletype

Teletype 2151 Series Bedienungsanleitung

Teletype

Teletype SatelliteTracker 1405 Montage- und Bedienungsanleitung

Teletype

Teletype WorldNav Sicherheitsleitfaden

Teletype

Teletype WorldNav 3300 Bedienungsanleitung

Teletype

Teletype 2151 Series Bedienungsanleitung

Teletype

Teletype WorldNav 7650 Montageanleitung

Teletype

Teletype WorldNav 7400 Bedienungsanleitung

Teletype

Teletype WorldNav 3100 Bedienungsanleitung

Teletype

Teletype WorldNav 5200 Installationshandbuch

Teletype

Teletype 1351 Bedienungsanleitung

Beliebte GPS Handbücher anderer Marken

Raven

Raven Cruizer II Handbuch

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung