Telit Wireless Solutions EVB Bedienungsanleitung

EVB IoT Device Development Kit

This Quick Start Guide will walk you through the easy steps required to setup the evaluation board for

your wireless application.

The EVB is a tool designed for engineers, programmers and developers allowing to connect and use

all the Telit Modules Interfaces.

Before starting, please connect your chosen Telit module interface to the EVB.

Getting started is easy

Your Telit EVB kit contains the following:

• Main board

• Socket for embedded module interface board

• Power supply adapter & power cable

• Micro USB Cable

• Mini USB Cable

• Cellular Antenna

The picture below shows a typical evaluation board (EVB) platform consisting of an EVB main board

and a TLB (Translation Board). In the setup depicted below, a Telit LE920 module is mounted:

EVB IoT Device Development Kit - Quick Start Guide

Run the EVB with your module

1Install the proper PC drivers

Telit provides two different installers according to the host system architecture (x86 or x64).

In the link below you can nd the available set of USB drivers

https://www.telit.com/developer-zone/iot-device-prototyping-kit/

With the EVB disconnected from the PC, please run the installer package and, after the

welcome screen, follow the instructions of the Windows® Wizard.

2Plug the module on your EVB

Please contact your Telit representative for the list of available extension module that can be

used with the EVB. Plug the module on the evaluation board, making sure that the EVB and

adapter connectors are properly mated

EVB IoT Device Development Kit - Quick Start Guide

3Connect the board with the PC

Plug the USB cable, one end of the USB port to Evaluation Board and the other end of the

USB port to your PC or laptop.

4Power Supply

Connect the power supply adapter and the external power cable to your board.

5Power On

The ON/OFF functionality and its use is depending on the used module. Please refer to the

related Module’s Hardware User Guide and Interface User Guide. Typically, to turn on the

module, the ON/OFF button must be pressed for at least 5 seconds and then released.

The table below contains typical intervals for which the button must be pressed for some

Telit modules.

EVB IoT Device Development Kit - Quick Start Guide

On your PC, please go to Control Panel > Device Manager and check the COM port number.

The screenshot below reports an example of the port composition listed on Windows 10

Device Manager.

USB Modem ports are ACM devices and can be used as AT Command interface. To identify the

corresponding COM port number, just right click on one of the two Telit USB Modem entries,

select Properties, then Modem tab.

The picture shows the Telit USB Modem properties. In this example Windows 10 system binds

USB #17 with COM9 port.

EVB IoT Device Development Kit - Quick Start Guide

Congure the EVB with your module

1Telit AT Controller (TATC)

Telit AT Controller (TATC) is a easy to use AT command terminal designed to easily control

Telit modules.

Download the Telit AT Controller installation les from the following link:

https://www.telit.com/evkevb-drivers/ and save it on your desktop.

USB Drivers

•Telit_Modules_Linux_USB_Drivers_User_Guide_r5

•Telit_Windows_10_WHQL_Drivers_Installer_2.08.0002

•Telit_Windows_Desktop_Drivers_Installer_1.12.0003

•Telit_EVB_USB_Drivers

Tools

•Telit_AT_Controller_r3.4.11_XFP_4.0.5

•Telit_TMB_Setup_2.7.1

•Telit_Connection_Manager_Setup_1.5.0

2Install TATC

Unzip the folder and run Setup_TATC_3.4.11_XFP_4.0.5.msi le. Upon successful software

installation, you will see the following icons on your desktop:

EVB IoT Device Development Kit - Quick Start Guide

3Congure TACT

Double-click on the Telit AT Controller icon to open the application and then click on

Settings button

and select Port Settings tab to setup the AT port parameters such as in the picture below:

click OK button. Upon successful conguration, click Connect button.

EVB IoT Device Development Kit - Quick Start Guide

The module information such as MAC Address, Manufacturer name, Model Number,

Firmware Release version will be displayed.

To start the AT Terminal window, click AT Terminal button.

You are now ready to send AT commands in the TATC input box and then click Execute button.

Issue the following commands to verify rmware version and options

• AT#SWPKGV

• AT#SWOPTIONS

EVB IoT Device Development Kit - Quick Start Guide

Andere Handbücher für EVB

Inhaltsverzeichnis

Andere Telit Wireless Solutions Hauptplatine Handbücher

Telit Wireless Solutions

Telit Wireless Solutions SC872-A Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions GainSpan GS2200M Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions Jupiter SL869 Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-V3 EVK Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Installationshandbuch

Telit Wireless Solutions

Telit Wireless Solutions Bravo EVK Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions EVB 2.0 Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions WL865E4-P Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions GS2200M SKB TLS Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions CHARLIE Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SE868V2 Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions Bravo Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions EVK2 Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SE878K3-A EVK Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions JF2 EVK Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions Bravo Montage- und Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions EVK2 Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions LE910C-EU Series Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions xE910 Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Installationshandbuch

Telit Wireless Solutions

Telit Wireless Solutions GS2200M SKB S2W Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung