Tellabs ONT180C Bedienungsanleitung

ONT180C Installation and Turnup Guide

Page 2 of 38

Tellabs®Information

The information in this publication is proprietary to Tellabs Enterprise, Inc.

No part of this publication may be used, disclosed, reproduced, adapted, translated, stored in a

retrieval system, or transmitted in any form or by any means, electronic or mechanical, for any

purpose, without the written permission of Tellabs Enterprise, Inc. Although every precaution

has been taken in the preparation of this publication, Tellabs Enterprise, Inc. assumes no (i)

responsibility for errors or omissions contained herein or (ii) liability for any damages resulting

from the use of information contained herein. Information in this publication is subject to change

without notice.

Trademarks

The following trademarks and service marks are owned by Tellabs Operations, Inc. or its

affiliates in the United States and/or other countries: TELLABS®, TELLABS and Tsymbol®,

Tsymbol®.

Any other company or product names may be trademarks of their respective companies.

Proprietary

This document is the property of Tellabs Enterprise, Inc. and contains confidential and

proprietary information owned by Tellabs Enterprise, Inc. Any copying, use, or disclosure of the

contents of this document, without the written permission of Tellabs Enterprise, Inc., is strictly

prohibited.

ONT180C Installation and Turnup Guide
Page 3 of 38
Table of Contents
Tellabs® Informaon................................................................................................................2
Copyright..........................................................................................................................................2
Trademarks...................................................................................................................................... 2
Proprietary....................................................................................................................................... 2
1. Tellabs® ONT180C Installaon and Turn Up Guide................................................................4
1.1. Descripon................................................................................................................................ 6
1.2. Site Preparaon....................................................................................................................... 13
1.3. Safety Precauons................................................................................................................... 17
1.4. Installaon...............................................................................................................................19
1.5. Contact Us............................................................................................................................... 33
1.6. Add to Panorama EMS............................................................................................................. 35

ONT180C Installation and Turnup Guide

Page 4 of 38

1. Tellabs® ONT180C Installation and Turn Up Guide

Document Revisions

Revision

Date

Notes

Revision A

May 27, 2021

·Formal Release of Document

Related Documentation

N/A

Contents

·Description

·Site Preparation

·Safety Precautions

·Installation

·Contact Us

·Add to Panorama EMS

Introduction

This guide describes the Tellabs ONT180C optical network terminal (ONT), its features,

status indicators, installation.

The ONT180C is part of the Tellabs 100 series of ONTs for passive optical networks

(PON). It is a compact desktop unit that can sit on a desk, mounted to any number of

surfaces using a wall mountbracket (optional).

When connected to a Tellabs 1100-series optical line terminal (OLT — 1150/1150E,

1134, or 1131) through a single fiber optic cable, the ONT provides high-performance

ONT180C Installation and Turnup Guide

Page 5 of 38

enterprise features, combined with cost, energy, and space savings, all within the

Tellabs exclusive high-security All Secure™ PON.

Intended Audience

This document is intended for technicians responsible for:

·Preparing the install location

·Unpacking and installing the ONT and any accessories

·Connecting the ONT to power and the PON network

·Connecting services to the ONT

ONT180C Installation and Turnup Guide
Page 6 of 38
1.1. Description
·LED Behavior
·ONT180C Manual Controls and Switches
·ONT180C Specifications
The ONT180C supports the following features.
General Features
·Single fiber GPON interface with 1.25Gbps upstream and 2.5Gbps downstream
data rates
·802.3bt 4PPoE Type 3 PSE capable of Class 1 through 6 , supplying up to 60W
on a single port (51W at the PD) for powering downstream Powered Devices
(PD), with 140 W total PoEoutput for the ONT when powered by the AC adapter
·Fully ITU-T G.984-compliant framing
·Flexible mapping between GEM ports and T-CONTs
·Supports single and multiple T-CONT and GEM ports per device
·Activation with automatic discovered Serial Number
·AES-128 Decryption with key generation and rapid churning

ONT180C Installation and Turnup Guide

Page 7 of 38

·Forward Error Correction(FEC)

·IP DSCP to 802.1pbit mapping

·Rich set of LED indications for alarming and maintenance

·Supports eight (8) VLANs per port, 25 VLANs per port when VLAN trunk is used,

up to 125 VLANs per ONT.

Ethernet Features

·Eight (8) 10/100/1000 Base-T Ethernet ports

·Auto-sensing MDI/MDIX or manual configuration

·802.1Q VLANs

·Ethernet ports support auto negotiation or manual configuration

·IP ToS/DSCP to 802.1p mapping

·QoS based on VLAN-ID, 802.1p bit, ToS/DSCP

·Marking/remarking of 802.1p

·IGMP v2/v3snooping

·Up to 255 MAC addresses per port

·IPv6-capable for enterprise services

·Upstream ACL rate limiting

·IEEE 802.3 az Energy-efficient Ethernet

·IEEE 802.1x Port-Based authentication

·IEEE802.3af PoE, high power IEEE802at PoE+ and IEEE802.3bt, including up to

Class 5 negotiations

·Support for 60W UPoE for devices supporting Cisco UPoE

·Link Layer Data Protocol(LLDP) for auto-provisioning and inventory, and LLDP-

MED for PoE power management

·Advanced data features such as VLAN tag manipulation, VLAN trunking,

classification, and filtering

ONT180C Installation and Turnup Guide

Page 8 of 38

·Network Access Control (NAC) with Dynamic VLAN and Guest VLAN

·Upstream broadcast rate limiting and filtering for security control

·Dante and Cobranet Support

Security

Tellabs has implemented unique advanced security features to protect enterprise

networks. The ONT180C supports security across the optical distribution network and

end-to-end over the OLAN system; such as encryption of traffic on the PON using the

Advanced Encryption Standard AES-128 and Access Control Lists (ACL) at Layer 2

through 4 levels.

The ONT provides for advanced dynamic assignment of services to a port via the use of

Network Access Control (NAC) with fall back to a Guest VLAN. The ONTsupports

IEEE 802.1x port-based authentication and MAB. This prevents unauthorized access to

ports, and offers RADIUS authentication for users and distribution of policy to end users

based on their login.

ONT180C Connectors

The back edge of the ONT180C has 11 connectors;

·UPS– Uninterruptible Power Supply (UPS) AC adapter input. This is a special

connector that matches the DC power output cable from the adapter and the

optional Battery Backup Unit (BBU) accessory (not currently available). This

connector is also used for the 150W high power AC adapter.

·DC 54V DC– power input. This is a special power connector that mates with a

Phoenix-type pluggable terminal connector (5.08 mm pitch 2P), allowing remote

ONT180C Installation and Turnup Guide

Page 9 of 38

bulk DC power to be used. (Remote bulk DC power is limited to 100 VA by NEMA

class 2 code.)

·GE1– GE8– 1000BT Gigabit Ethernet ports (eight) supporting Power over

Ethernet (PoE) devices. These are standard RJ45 Ethernet port jacks.

·Optical Connector (behind laser cover). The ONT to the Optical Line Terminal

(OLT) upstream over a fiber-optic cable. It is a standard SC/APC-type connector

for Single-Mode Fiber (SMF) cable. The connector is protected by a small plastic

cover located at the right-hand corner of the back panel (when viewed from the

rear).

ONT180C Indicators

The top of the ONT180C has 10 LED indicators near the front edge:

·Power– shows status of the DC power input

·PON– shows status of the Passive Optical Network (PON)

·GE1 – GE8– shows status of the eight Gigabit Ethernet ports

LED Behavior

LED

Indications

Comments

Power

Green

Input power is good to the ONT

Dark

Power is off to the ONT or power unit has failed

PON

Red

The PON is currently down, ONT is not receiving a signal from the OLT

ONT180C Installation and Turnup Guide

Page 10 of 38

Green

Blink Fast

The PON is up and ONT is attempting to register on the PON. If Auto Configuration is

not enabled, use Unknown ONT option on the Panorama PON to register ONT.

Green

Blink Slow

The board is performing a software download.

Green

The PON is up and operating normally.

Dark

The ONT is booting

GE1-

GE8

Green

•Link(Up)•PoE(No PD Detected)•Data(No data detected)

Green

Blink

•Link(Up)•PoE(No PD Detected)•Data(Data detected)

Amber

•Link(Up)•PoE(Powering PD)•Data(No Data Detected)

Amber

Blink

•Link(Up)•PoE(Powering PD)•Data(Data Detected)

Dark

The Ethernet Port is disabled or link is not detected

ONT180C Manual Controls and Switches

The ONT180C has only one user-operable control:

·Reset – This pushbutton resets the ONT

The Reset pushbutton is accessible through a small hole on the right-hand side of the

unit (when viewed from the front).

ONT180C Specifications

ONT180C specifications are listed in Table B.

Inhaltsverzeichnis

Andere Tellabs Netzwerk-Hardware Handbücher

Tellabs

Tellabs 8820 MSR Benutzerhandbuch

Tellabs

Tellabs 251 Bedienungsanleitung

Tellabs

Tellabs 7100 Bedienungs- und Wartungsanleitung

Tellabs

Tellabs 100 Series Bedienungsanleitung

Tellabs

Tellabs 263DC Bedienungsanleitung

Tellabs

Tellabs FlexSym ONT205 Bedienungsanleitung

Tellabs

Tellabs FlexSym OLT-mini Bedienungsanleitung

Tellabs

Tellabs FlexSym OLT6 Bedienungsanleitung

Tellabs

Tellabs 6047 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung