Tenda TEI402M Bedienungsanleitung
Copyright Statement
is the registered trademark of Shenzhen Tenda
Technology Co., Ltd. Other trademark or trade name mentioned
herein are the trademark or registered trademark of the
company. Copyright of the whole product as integration,
including its accessories and software, belongs to Shenzhen
Tenda Technology Co., Ltd. Without the permission of Shenzhen
Tenda Technology Co., Ltd, individual or party is not allowed to
copy, plagiarize, imitate or translate it into other languages.
All the photos and product specifications mentioned in this
manual are for references only, as the upgrading of software and
hardware, there will be changes. And if there are changes,
Tenda is not responsible for informing in advance. If you want to
know more about our products information, please visit our
website at www.tenda.cn
TEI402M Multifunction Broad Band Router
1
Table of Contents
Chapter 1 Introduction............................................................ 3
1.1 Product Feature ................................................................ 3
1.2 Package Contents ............................................................. 3
Chapter 2 Hardware Setup ..................................................... 4
2.1 Rear Panel ......................................................................... 4
2.2 Front Panel ........................................................................ 4
2.3 Hardware Install Process ................................................. 5
Chapter 3 Router Setting........................................................ 6
3.1 Setup Right Network......................................................... 6
3.2 Fast Setup Guide .............................................................. 6
3.3 Config Illuminate..............................................................11
3.3.1 Running Status..............................................................11
3.3.2 Wizard ............................................................................11
Please refer to 3.2 Fast Setup Guide....................................11
3.3.3 Advanced Config...........................................................11
3.3.3.1 LAN Port .....................................................................11
TEI402M Multifunction Broad Band Router
2
3.3.3.2 WAN Port Setup ........................................................ 12
3.3.3.3 MAC Address Clone.................................................. 12
3.3.3.4 DNS ............................................................................ 13
3.3.4 DHCP Server................................................................. 13
3.3.4.1 DHCP Service ............................................................ 13
3.3.4.2 DHCP Client List........................................................ 14
3.3.5 Virtual Service .............................................................. 14
3.3.5.1 Virtual Server............................................................. 14
3.3.5.2 DMZ Host ................................................................... 15
3.3.5.3 UPnP Mapping Table................................................. 15
3.3.6 Secruity Setting............................................................ 15
3.3.6.1 Firewall Setting ......................................................... 15
3.3.6.2 URL Filter................................................................... 15
3.3.6.3 MAC Filter .................................................................. 15
3.3.6.4 Remote WEB Management....................................... 15
3.3.6.5 WAN Port Ping........................................................... 16
3.3.6.6 Special Application Filter ......................................... 16
Appendices : Default setting of the router.......................... 17
TEI402M Multifunction Broad Band Router
3
Chapter 1 Introduction
1.1 Product Feature
One 10M/100M auto negotiation WAN port, connectible to
xDSL/Cable Modem or Ethernet
Four 10M/100M auto negotiation LAN ports
Compliant with IEEE802.3 Ethernet Standard and
IEEE802.3u Fast Ethernet Standard
Support TCP/IP, PPPoE, PPTP, DHCP, ICMP, NAT, SNTP
protocol
Prevent D.O.S Network attack
Support VPN Pass through
Support UPnP, support MSN audio and video
Communication
Support DDNS
Provide DHCP server, support fixed IP address
Support static and dynamic Routing
Support Virtual server, support DMZ host
Support MAC address filter, can control user access
Internet
Support URL filter, can control user access Web site
Run or Stop at set time, save Internet access money
Local、Remote Web management, English Web pages
Upgrade firmware on the Web
1.2 Package Contents
Multifunctional Broadband Router
Power Adapter
User Manual
TEI402M Multifunction Broad Band Router
Chapter 2 Hardware Setup
2.1 Rear Panel
Power: Special Power Adapter.
WAN: WAN PORT(RJ-45) Connect to Xdsl/Cable Modem or
Ethernet.
LAN Port: 4 RJ-45 ports Computer and HUB/Switch connect
Ethernet through these ports.
Notice:
1. please use the special power with this router otherwise it will
be damaged.
2. WAN: WAN port(RJ-45) To connect the router with XDSL or
Enthernet
3. LAN: 4 RJ-45 Port.
4. Reset: Press this button for 3 seconds, the LED indicators of
SYS will fast blink. Loosen the botton the router will restore
default setting and restart automatically.
2.2 Front Panel
LED Indicators
Link/Act Status
Indication for
WAN & LAN
LED will LIGHT when link is
established LED will blink when
packet is transmitting or receiving
POWER Power
Indication
LED will LIGHT when powered on
SYS System
Indication
LED will blink when system work.
LED will dark when system restart
or loading system
4
TEI402M Multifunction Broad Band Router
5
2.3 Hardware Install Process
2.3.1.Establish LAN Connection
Connect the port of router with HUB or switch by a line. You also
can connect the computer LAN card directly.
2.3.2 Establish WAN Connection
Connect the WAN port of router with xDSL/Cable Modem by a
line.
2.3.3.Power Link
Link the power and the router will start automatically.
TEI402M Multifunction Broad Band Router
6
Chapter 3 Router Setting
3.1 Setup Right Network
The default IP address of this router is 192.168.0.1.The default
subnet mask is255.255.255.0.All these parameters can be
amended if needed but in this use manual we will illuminate
according the fault parameters.
First please connect your computer with the LAN port of the
router and then set the IP address of your computer.
Hint: The LED indicators of the Link/Act of the router and the
LAN card of your computer must light at the same time .
Hint:If the IP address of your router is 192.168.8.1,then the IP
address of your computer must be 192.168.0.xxx(from 2 to 254).
3.2 Fast Setup Guide
Click Internet Explore or Netscape Communicator and enter the
IP address of this router (default setting:192.168.0.1),a user
name and password screen will appear.
Hint: If you use agent server please cancel this option or add the
IP address of the router to the Exception of the agent server
setup(you can find these setup in the TOOL of IE).
TEI402M Multifunction Broad Band Router
If the user name and password is correct, a screen of
administrator pattern will appear .The default user name and
password are all admin.
Click “Next” or Wizard of left manual to select how to access
internet.(This router can access internet in 3 ways).
1. If you select PPPoE(ADSL Virtual Dial- up), you need to
enter the following:
7
TEI402M Multifunction Broad Band Router
Username & Password: Enter Account and password provided
by ISP. If you don’t know them please refer to ISP.
2. If you can access internet with dynamic IP address .Namely,
you can obtain IP address automatically from your ISP .You
needn’t write any parameter and access internet
automatically .（If your ISP need to integrate the MAC address
of your Lan card you can clone MAC address）.
3. If you can access internet with fixed. Namely, you have the
fixed IP address provide by your ISP address, you need fill in
the following data:
IP address: The router IP address to WAN. If you don’t know
them well please refer to your ISP .
8
TEI402M Multifunction Broad Band Router
Subnet Mask: The router subnet mask to WAN (default
setting:255.255.255.0).
Gateway: Fill in the gateway provide by your ISP, If you don’t
know them well please refer to your ISP .
Primary DNS: Fill in the DNS server provide by your ISP, If you
don’t know them well please refer to your ISP.
Secondary DNS: Optional. If your ISP provide you with two DNS,
you can fill in the other here.
4. If you can access internet with PPTP, you need to enter the
following: (The parameters are just for your reference. If you
do not know any of the details, or your provider uses PPPoE
or PPTP, please contact your provider for more information.
Username and password are usually supplied by your
provider in your first-time setup documents.)
PPTP Account: Your adsl or cable login name
(example☺‘user@adsl-comfort’ of ‘user@xs4all-basic-adsl’
PPTP Password: Your adsl or cable password
PPTP Gateway: IP address
9
Inhaltsverzeichnis
Andere Tenda Netzwerk-Router Handbücher
Tenda
Tenda D840 Bedienungsanleitung
Tenda
Tenda G1005D Bedienungsanleitung
Tenda
Tenda 4G180 Bedienungsanleitung
Tenda
Tenda TEG1016G Bedienungsanleitung
Tenda
Tenda D810R ADSL2+ Bedienungsanleitung
Tenda
Tenda O3 Bedienungsanleitung
Tenda
Tenda N300 Bedienungsanleitung
Tenda
Tenda F303 Einrichtungshandbuch
Tenda
Tenda TE-D305 Bedienungsanleitung
Tenda
Tenda TX12 Pro Bedienungsanleitung
Tenda
Tenda W303R Bedienungsanleitung
Tenda
Tenda S105 Bedienungsanleitung
Tenda
Tenda V1200 Bedienungsanleitung
Tenda
Tenda teg2124t Bedienungsanleitung
Tenda
Tenda FH305 Bedienungsanleitung
Tenda
Tenda TEG1016D Bedienungsanleitung
Tenda
Tenda F357 Bedienungsanleitung
Tenda
Tenda TEH1026G Bedienungsanleitung
Tenda
Tenda Nova MW Series Installationsanleitung
Tenda
Tenda AX1800 Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise