Tennant 613087 Bedienungsanleitung

KIT NO. 613087

36V TRANSAXLE REPLACEMENT KIT

Page 1 of 2

613088 Rev. 00 (02–02) Tennant Company Commercial Products Printed in U.S.A

INSTALLATION INSTRUCTIONS:

(Installation Time: 2 hours)

TOOLS REQUIRED: 7/16”, 9/16”, 11/16” Socket Wrench,

Small Flat Head Screwdriver and Snip Pliers.

1. Remove batteries from machine, 9/16”

wrench required.

FOR SAFETY: When servicing machine, wear

safety glasses and protective gloves when

handling batteries or battery cables. Avoid con-

tact with battery acid.

2. With adequate assistance, carefully turn

the machine upside down to access the

drive transaxle motor (Figure 1).

Fig. 1

3. Remove the wheels from the old transaxle,

7/16” socket wrench required (Figure 2).

Fig. 2

KIT CONTENTS

P/N. Description Qty.

612845 TRANSAXLE, 36V MOTOR, 116 RPM 1

612908 ADAPTER, WIRE TRANSAXLE 1

140501 NUT, 1/4–20 8

602881 BRACKET, TRANSAXLE MOUNT 1

130040 WIRE TIE 6.0 x .12 2

4. Carefully cut the wire-tie that secures the

motor’s wire harness, then unplug the wire

harness connector. Use a small flat head

screwdriver to disengage the connector

plug (Figure 3).

Fig. 3

5. Remove the transaxle mounting brackets

and motor guard bracket,11/16” wrench re-

quired. Then remove the old transaxle from

the machine (Figure 4).

Fig. 4

Home

Page 2 of 2

KIT NO. 613087

36V TRANSAXLE REPLACEMENT KIT

INSTALLATION INSTRUCTIONS –Continued

613088 Rev. 00 (02–02) Tennant Company Commercial Products Printed in U.S.A

6. Install the new transaxle on the machine.

Use the existing mounting hardware

including the supplied axle mounting

bracket, if needed. Use soapy water to

slide brackets over rubber mounts if

necessary. Make sure to reinstall the shim

on the side shown below (Figure 5).

NOTE: If your machine

was equipped with a motor

guard bracket, dispose of

bracket. It is not required

with new transaxle.

NOT REQUIRED

Use Shim

Fig. 5

7. Reinstall the old wheels on the new trans-

axle. Use existing washers with the new

nuts supplied with the kit.

8. Connect the transaxle wiring to the

machine using the transaxle wire adapter

supplied with the kit (Figure 6).

Fig. 6

9. Secure the transaxle wire adapter with

wire–ties supplied (Figure 7).

Fig. 7

10. Carefully turn the machine to the upright

position and reinstall the batteries (Figure 8).

Connect Last

–

CHARGER PLUG

MACHINE

FRONT

BLK

RED 31

RED

Fig. 8

FOR SAFETY: When servicing machine, wear

safety glasses and protective gloves when

handling batteries or battery cables. Avoid con-

tact with battery acid.

11. Test the machine for proper operation.

Turn the speed control knob to the slowest

setting and rotate the control grips com-

pletely forward. The machine should begin

to move slowly at a maintained speed. With

the grips still rotated completely forward,

gradually turn the speed control knob to the

maximum speed. The machine should be-

gin to accelerate to the maximum speed.

Home

Andere Tennant Bodenreinigungsmaschine Handbücher

Tennant

Tennant MM267 Bedienungsanleitung

Tennant

Tennant 3240 Bedienungsanleitung

Tennant

Tennant T1 Bedienungsanleitung

Tennant

Tennant T1 Bedienungsanleitung

Tennant

Tennant 7400 Bedienungsanleitung

Tennant

Tennant 385D Bedienungsanleitung

Tennant

Tennant 1200 Produkthandbuch

Tennant

Tennant 611363 5100 Bedienungsanleitung

Tennant

Tennant EC2 Produkthandbuch

Tennant

Tennant 6650 Bedienungsanleitung

Tennant

Tennant 5700EE Bedienungsanleitung

Tennant

Tennant 1530 Produkthandbuch

Tennant

Tennant 2000 Produkthandbuch

Tennant

Tennant 515 Bedienungsanleitung

Tennant

Tennant 9003531 - 2510 Bedienungsanleitung

Tennant

Tennant B10 Bedienungs- und Montageanleitung

Tennant

Tennant B10 Bedienungsanleitung

Tennant

Tennant 5100 Produkthandbuch

Tennant

Tennant 5200 Produkthandbuch

Tennant

Tennant 1100 Produkthandbuch

Tennant

Tennant 2510 Produkthandbuch

Tennant

Tennant F3 Produkthandbuch

Tennant

Tennant 1465 Bedienungsanleitung

Tennant

Tennant 5300 Produkthandbuch

Beliebte Bodenreinigungsmaschine Handbücher anderer Marken

Nilfisk-Advance

Nilfisk-Advance Advance SC370 17B Bedienungsanleitung

Numatic

Numatic ET 4045 Bedienungsanleitung

HAWK ENTERPRISES

HAWK ENTERPRISES HP1513-180BRUTE Bedienungsanleitung

Mytee

Mytee 8070 Mytee-Lite Bedienungsanleitung

Kärcher

Kärcher B 140 R Bedienungsanleitung

Triple S

Triple S Ace 26T1 Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance SW 750 Bedienungsanleitung

Tornado

Tornado Marathon 2000 98190 Handbuch

Windsor

Windsor ADMIRAL Admiral 8 Bedienungsanleitung

Numatic

Numatic TTB 1117/100 Bedienungsanleitung

Nobles

Nobles Frontier Produkthandbuch

lavina

lavina 21-X Bedienungsanleitung

KENT

KENT Edge 28B Bedienungsanleitung

Windsor

Windsor BDP 51/2000C Bedienungsanleitung

CleanFreak

CleanFreak DURA-18HD Bedienungsanleitung

Nilfisk-Advance

Nilfisk-Advance Warrior 34RST Administratorhandbuch

BETCO

BETCO PB24 Bedienungsanleitung

IPC

IPC CT51-71 BT Bedienungsanleitung