8
NOTE:
For the inial set-up and registraon of the devices, a router with Internet
access is required (provided by the system user). A Wi-Fi router is responsible
for delivering a wireless signal to each of the system components
Further informaon can be found in the chapter — SMART System — informaon
about the system and applicaon, as well as on the website www.termasmart.com
Each of the devices can funcon independently, however, the recommended
structure of the system consists of heang zones, e.g. individual rooms in the
house, which may include one (as a maximum) VTS temperature sensor per
room and any number of other types of devices and sensors. Terma SMART
Wi-Fi heang devices will funcon at an opmum level when connected per-
manently to a local Wi-Fi network with Internet access.
The devices will also funcon without access to the Internet, or even without
a Wi-Fi connecon, but in this case the previously loaded schedule will be
implemented, and many of the device funcons will remain unavailable.
STARTING THE VOLTAN RADIATOR
1. Install the SMART applicaon on your mobile device, grant the appropriate
approvals relang to the locaon and operaon of the scanner.
2. Create a user account and provide basic details of the newly created ʻhouse’.
3. Prepare a password for the local Wi-Fi network.
4. Turn on the radiator and start PAIRING:
