Tern DuoStand Bedienungsanleitung

ternbicycles.com

DuoStand™

Safety

Do not exceed the load limit of 60 kg (132 lb).

Never leave children on a parked bike unattended.

What’s Included

• DuoStand

• M10 x 30 Bolt x 2

• M10 x 70 Bolt x 1

• M10 Nut x 2

• M10 Washer x 4

• M10 Spring Washer x 1

Installation

Tools required (not included)

• 17 mm Wrench x 2

• 3, 4 or 5 mm Allen Wrench*

* Tool for removing the existing

kickstand may differ depending on

your bike.

Additional Kit Required (For HSD™Owners Only)

The DuoStand HSD Kit (sold separately) is required to install the DuoStand on the HSD.

1. Remove the existing kickstand. (Tool may differ depending on your bike.)

* DuoStand HSD Kit

– M10 x 45 Bolt x 2

– Bushing x 2

– Flat Plate

– Wing-shaped Plate

WARNING: Route cables as shown

to avoid damage from compression.

2. Install both Bolt Sets in the order and arrangement shown below.

HSD

Other Bikes

Assembly Order

Nut

Washer

Wing-shaped plate*

Bushing*

Bike

Flat plate*

DuoStand

Washer

Bolt*

* Use parts from the DuoStand HSD Kit.

Mounting Location

Assembly Order

Nut

Washer

Bike

DuoStand

Washer

Bolt

17 mm

35 Nm – 40 Nm

Bike Bike

17 mm

35 Nm – 40 Nm

ternbicycles.com

DuoStand™

LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with a ONE (1) YEAR Limited Warranty from the date of retail purchase by the

original end-user. If a material or workmanship defect arises and a valid claim is received within the Warranty Period, this Product will be replaced.

Mobility Holdings cannot be held liable for damages to personal property due to misuse or improper care and maintenance. This Product Warranty

does not, under any circumstance, cover the replacement or cost of any third party product used with or connected to the Product.

Tern, the Tern Werd (logotype), the Tern Berd (device), Lockstand, HSD and DuoStand used alone or in combination are trade names, trade devices

or registered trademarks of Mobility Holdings, Ltd.

ternbicycles.com

@ternbicycles

3. Measure the distance from the bottom of the rear tire to the ground and adjust the height of the DuoStand.

The recommended clearance from the bottom of the rear wheel to the ground is 10 - 20 mm (2/5” - 4/5”). If adjustment is needed, loosen the bolts on

the DuoStand Ends to raise or lower the legs. Tighten the bolts to a torque of 8 - 9 Nm.

Optional: Install the Lockstand™Extensions

For maximum stability when parked, install the Lockstand Extensions which are available for purchase from your local Tern dealer.

10 - 20 mm

Andere Tern Fahrradzubehör Handbücher

Tern

Tern Vizy Light Bedienungsanleitung

Tern

Tern Q-Lock Handlepost Bedienungsanleitung

Tern

Tern Nitelite Rear Bedienungsanleitung

Tern

Tern Perch Bicycle Wall Mount Bedienungsanleitung

Tern

Tern Physis RF Bedienungsanleitung

Tern

Tern Cargo Hold 37 Bedienungsanleitung

Tern

Tern Andros Bedienungsanleitung

Tern

Tern Atlas Bedienungsanleitung

Tern

Tern Physis 3D Handlepost Bedienungsanleitung

Tern

Tern Bucketload Pannier Bedienungsanleitung

Tern

Tern Clubhouse Mini Gen 1 Bedienungsanleitung

Tern

Tern Market Basket Bedienungsanleitung

Tern

Tern Vektron MaxDrive System Bedienungsanleitung

Tern

Tern Andros Bedienungsanleitung

Tern

Tern Soft Crate Mini Bedienungsanleitung

Tern

Tern Valo 2 Bedienungsanleitung

Tern

Tern DuoStand Ends Bedienungsanleitung

Tern

Tern Sidekick Handle Bedienungsanleitung

Tern

Tern Pack Rack Bedienungsanleitung

Tern

Tern Physis 3D Bedienungsanleitung

Tern

Tern Valo Direct Bedienungsanleitung

Tern

Tern TFL Hinge Bedienungsanleitung

Tern

Tern DuoStand Gen 2 Bedienungsanleitung

Tern

Tern QuadStruts Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung