TESTO 410-2 Anleitung zur Verwendung
Notizen10
Short manual testo 410-2 11
Short manual testo 410-2
ÀProtection cap: Park position
ÁImpeller
ÂHumidity/temperature sensor
ÃDisplay
ÄControl keys
ÅBattery compartment (on rear)
Basic settings
Instrument off >press and hold 2s > select with ( ),
confirm with ( ):
Unit of temperature: °C, °F > Unit of humidity: %, td (dew point) > WB (wet bulb) >
Unit of velocity: m/s, km/h, fpm, mph, kts, Beau > Auto off-Funktion: OFF, ON
Switching the instrument on
Press .
Switching the display light on (for 10s)
Instrument on > press .
Select display size
Instrument on > select with :
Velocity, humidity, wind chill temperature ( )
Select display mode
Instrument on > select with :
Current reading > Hold: Readings are held > Max: Maximum values > Min: Minimum
values > Hold Avg: Timed mean value calculation, see below
Timed mean value calculation for flow
Press several times, until Hold and Avg appear > Hold down
until - - - - appears > Releasing starts mean value calculation,
the current readings are displayed > End measurement:
press the mean value is displayed.
Switching the instrument off:
Instrument on >press and hold 2s.
de
enfres
it
pt
sv
nl
??
??
Safety and the enviroment12
Safety and the environment
About this document
> Please read this documentation through carefully and
familiarise yourself with the product before putting it to use.
Keep this document to hand so that you can refer to it when
necessary. Hand this documentation on to any subsequent
users of the product.
> Pay particular attention to information emphasised by the
following symbols:
Important.
Avoid personal injury/damage to equipment
> Only operate the measuring instrument properly, for its
intended purpose and within the parameters specified in the
technical data. Do not use force.
> Never store the product together with solvents, acids or other
aggressive substances.
> Only carry out the maintenance and repair work that is
described in the documentation. Follow the prescribed steps
when doing so. Use only OEM spare parts from Testo.
> Do not use the device in a polluted environment (heavily dusty,
oil, foreign matter, volatile chemicals).
Protecting the environment
> Take faulty rechargeable batteries as well as spent batteries to
the collection points provided for them.
> Send the product back to Testo at the end of its useful life. We
will ensure that it is disposed of in an environmentally friendly
manner.
Specifications 13
Specifications
The testo 410-2 is a flow/humidity/temperature measuring
instrument. It is normally used to measure the air speed at
ventilation outlets. In addition to the simultaneous measurement
of humidity and temperature, climatic conditions can also be
analysed.
Technical data
Measurement data
· Sensors:
Plastic impeller,
Testo humidity sensor,
NTC temperature sensor
· Parameters:
m/s, km/h, fpm, mph, kts, Beaufort,
°C, °F, wind chill, %rH, wet bulb, td
· Measuring ranges:
0.4...20 m/s, 80... 4000 fpm
-10...50 °C, 14...122 °F, 0...100 %rH
· Resolutions:
0.1 m/s, 1 fpm
0.1 °C, 0.1 °F, 0.1 %rH
· Accuracies (Nominal temperatue 22 °C,
±1 Digit):
±(0.2 m/s +2 % of reading),
±(40 fpm +2 % of reading),
±0.5 °C, ±0.9 °F,
±2.5 %rH (5...95%rH)
Long-term stability: ±1 %rF / year
· Measuring rate:
0.5 s, humidity: 1s
Further instrument data
· Protection class: IP10
· Ambient conditions:
-10...50 °C, 14...122 °F
· Storage/transport conditions:
-40...70 °C, -40...158 °F
· Temperature coefficient:
type (k=1) 0.06 %rF / K
· Voltage supply:
2x 1.5 V type AAA
· Battery life:
60 h (without display light)
· Dimensions:
133x46x25mm / 5.2x1.8x1.0 in (inc.
protection cap)
· Weight: 110 g / 3.9 oz (inc. batteries
and protection cap)
Directives, standards and tests
· EC Directive: 2014/30/EC
de
enfres
it
pt
sv
nl
??
??
Product description14
Product description
At a glance
ÀProtection cap: Park position
ÁImpeller
ÂHumidity/temperature sensor
ÃDisplay
ÄControl keys
ÅBattery compartment (on rear)
First steps
ãInserting batteries:
1To open the battery compartment, push the battery cover
down.
2Insert batteries (2x 1.5 V type AAA). Observe the polarity!
3To close the battery compartment, push the battery cover
back on.
ãBasic settings (configuration mode):
Adjustable functions
· Unit of temperature: °C, °F
· Unit of humidity: %, td (dew point), WB (wet bulb)
· Unit of velocity: m/s, km/h, fpm, mph, kts, Beau
· Auto off function: OFF, ON (instrument switches off automatically if no key is
pressed for 10 minutes)
1When switching the instrument on, press and hold until
and appear on the display (configuration mode).
- The adjustable function is displayed. The current setting
flashes.
2Press ( ) several times until the desired setting flashes.
3Press ( ) to confirm the input.
4Repeat steps 2and 3for all functions.
- The instrument changes to measuring mode.
Using the product 15
Using the product
To ensure correct readings:
· Position instrument so that flow impacts at the rear.
· Keep temperature and humidity sources which may falsify the
measurement (e.g. hands) away from the sensor.
ãSwitching the instrument on:
>Press .
- Measuring mode is opened.
ãSwitching the display light on:
3The instrument is switched on.
>Press .
- The display light goes out automatically if no key is
pressed for 10 seconds.
ãChanging the parameter:
The parameter in the top display line can be changed. The
bottom display line always shows the temperature.
Adjustable parameters
· Velocity
· Humidity
· Wind chill temperature ( ): perceived temperature (only deviates from
ambient temperature at temperatures <10°C / <50°F and wind speeds
>1.34m/s / >264 fpm)
>Press several times until the desired parameter appears.
ãChanging the display view:
Adjustable views
· Current reading
· Hold: Readings are held.
· Max: Maximum values since the instrument was last switched on or last reset.
· Min: Minimum values since the instrument was last switched on or last reset.
· Hold Avg: Timed mean value calculation, see below.
>Press several times until the desired view appears.
ãTimed mean value calculation for flow:
1Press several times, until Hold and Avg appear in the
display. The last result of mean value calculation is
displayed.
2Hold down until - - - - appears. Releasing starts
mean value calculation automatically, the current readings
are displayed.
de
enfres
it
pt
sv
nl
??
??
Using the product16
3End measurement: press . The mean value is displayed.
4For further mean value calculation: hold down .
5End mean value calculation: press briefly.
ãResetting Max/Min values:
1Press several times until the desired view appears.
2Press and hold until - - - - appears.
3Repeat steps 1and 2for all values that are to be reset.
ãSwitching the instrument off:
>Press and hold until the display goes out.
Andere Handbücher für 410-2
2
Inhaltsverzeichnis
Andere TESTO Messgerät Handbücher
TESTO
TESTO 300 Handbuch
TESTO
TESTO 400 Bedienungsanleitung
TESTO
TESTO 320 Bedienungsanleitung
TESTO
TESTO 350 Maritime V2 Bedienungsanleitung
TESTO
TESTO 350 Maritime V2 Bedienungsanleitung
TESTO
TESTO 350 Maritime V2 Bedienungsanleitung
TESTO
TESTO 510 Bedienungsanleitung
TESTO
TESTO 606-1 Bedienungsanleitung
TESTO
TESTO Sensor LD pro Bedienungsanleitung
TESTO
TESTO 314 Benutzerhandbuch
TESTO
TESTO 319 Bedienungsanleitung
TESTO
TESTO 425 Bedienungsanleitung
TESTO
TESTO 440 Bedienungsanleitung
TESTO
TESTO 560i Bedienungsanleitung
TESTO
TESTO 454 Bedienungsanleitung
TESTO
TESTO 616 Bedienungsanleitung
TESTO
TESTO 206 Bedienungsanleitung
TESTO
TESTO 380 Bedienungsanleitung
TESTO
TESTO 608 - H1 Bedienungsanleitung
TESTO
TESTO 435 Bedienungsanleitung
