TESTO 511 Bedienungsanleitung
Instruction manual
testo 511
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
11
Short manual testo 511
Protection cap: Park position
Absolute pressure sensor nipple
connection
Display
Control keys
Battery compartment, holding
magnets (on rear)
Basic settings
Instrument off >press and hold 2s > select with ( ),
confirm with ( ):
Unit of height above mean sea level: m, ft > Value of height above mean sea level
(Altitude) > Unit of pressure: hPa, mbar, Pa, mmH2O, mmHg, psi, inH2O, inHG, >
Auto off function: OFF, ON
Switching the instrument on
Press .
Switching the display light on(for 10s)
Instrument on > press
Select display size
Instrument on > select with :
Absolute pressure, barom (barometric pressure), Altitude (height above mean sea
level)
Select display mode
Instrument on > select with :
Current reading > Max: Maximum values > Min: Minimum values
Switching the instrument off:
Instrument on >press and hold 2s.
de
enfresitptsvnl????
Short manual testo 511
12
Safety and the environment
About this document
iPlease read this documentation through carefully and
familiarise yourself with the product before putting it to use.
Keep this document to hand so that you can refer to it when
necessary. Hand this documentation on to any subsequent
users of the product.
iPay particular attention to information emphasised by the
following symbols:
Important.
Avoid personal injury/damage to equipment
iOnly operate the measuring instrument properly, for its
intended purpose and within the parameters specified in the
technical data. Do not use force.
iNever store the product together with solvents, acids or other
aggressive substances.
iOnly carry out the maintenance and repair work that is
described in the documentation. Follow the prescribed steps
when doing so. Use only OEM spare parts from Testo.
Strong magnets. Damage to other instruments!
iKeep a safe distance from products which could be damaged
by magnetism (e.g. monitors, computers, pacemakers, credit
cards).
Protecting the environment
iTake faulty rechargeable batteries as well as spent batteries to
the collection points provided for them.
iSend the product back to Testo at the end of its useful life. We
will ensure that it is disposed of in an environmentally friendly
manner.
Safety and the enviroment
13
Specifications
Functions and use
The testo 511 is an absolute pressure measuring instrument. It is
normally used to measure absolute pressure, e.g. for pressure
compensation in velocity measurement in ducts, laboratories and
production processes. Further measurement parameters are
barometric (surface) pressure (= pressure at sea level) and altitude
above sea level.
Technical data
Measurement data
· Sensor:
Absolute pressure sensor
· Parameters (absolute/barometric):
Pa, hPa, mbar, mmH2O, mmHg, inHG,
inH2O, psi
· Measuring ranges:
300...1,200 hPa, 120.4...481.8 inH2O
· Resolutions:
0.1 hPa, 0.01 inH2O
· Accuracies
(Nominal temperature 22 °C, ±1 Digit):
±3 hPa, ±1.2 inH2O
·Measuring rate:
0.5 s
Further instrument data
· Protection class: IP40
· Ambient conditions:
0...50 °C, 32...122 °F
· Storage/transport conditions:
-40...70 °C, -40...158 °F
· Voltage supply:
2x 1.5 V type AAA
· Battery life:
200 h (without display light)
·Dimensions:
119x46x25mm / 4.7x1.8x1.0 in (inc.
protection cap)
· Weight: 90g / 3.2 oz (inc. batteries and
protection cap)
Directives, standards and tests
· EC Directive: 2004/108/EEC
Warranty
· Duration: 2 years
· Warranty conditions: see guarantee
card
de
enfresitptsvnl????
Specifications
Test Equipment Depot - 800.517.8431
99 Washington Street,Melrose, MA 02176
TestEquipmentDepot.com
14
Product description
At a glance
Protection cap: Park position
Absolute pressure sensor nipple
connection
Display
Control keys
Battery compartment, holding
magnets (on rear)
First steps
²Inserting batteries:
1To open the battery compartment, push the battery cover
down.
2Insert batteries (2x 1.5 V type AAA). Observe the polarity!
3To close the battery compartment, push the battery cover
back on.
²Basic settings (configuration mode):
Adjustable functions
· Unit of height above mean sea level: m, ft
· Value of height above mean sea level (Altitude): Set flashing figure with ,
change to next figure with .
· Unit of pressure: hPa, mbar, Pa, mmH2O, mmHg, psi, inH2O, inHG,
· Auto off function: OFF, ON (instrument switches off automatically if no key is
pressed for 10 minutes)
1When switching the instrument on, press and hold until
and appear on the display (configuration mode).
- The adjustable function is displayed. The current setting
flashes.
2Press ( ) several times until the desired setting flashes.
Product description
15
3Press ( ) to confirm the input.
4Repeat steps 2and 3for all functions.
- The instrument changes to measuring mode.
Using the product
For measuring barometric (surface) pressure barom (= pressure
at sea level), the following must be observed:
· the altitude of the measurement site above sea level must be known,
and be set in the instrument, see chapter ‘First steps’, section ‘Basic
settings (configuration mode)’.
· The barometric pressure displayed is only correct for the altitude set,
for a change of altitude, the altitude above sea level must be reset.
For measuring barometric Altitude (= altitude relating to a fixed
level), the following must be observed:
· The altitude above sea level at the starting point of the measurement
(= Reference altitude) must be known and be set in the instrument,
see chapter ‘First steps’, section ‘Basic settings (configuration
mode)’. When entering the reference altitude, the current absolute
pressure is also stored as a reference pressure.
· When carrying out the measurement at the destination, the weather
conditions must be the same as when entering the reference altitude.
If the weather has changed (= change of absolute pressure), a new
reference value must be entered.
²Switching the instrument on:
iPress .
- Measuring mode is opened.
²Switching the display light on:
The instrument is switched on.
iPress .
- The display light goes out automatically if no key is
pressed for 10 seconds.
de
enfresitptsvnl????
Use the product
16
²Changing the parameter:
The parameter can be changed.
Adjustable parameters
· Absolute pressure
·barom (barometric pressure)
·Altitude (height above mean sea level)
iPress several times until the desired parameter appears.
²Changing the display view:
Adjustable views
· Current reading
·Max: Maximum values since the instrument was last switched on or last reset.
·Min: Minimum values since the instrument was last switched on or last reset.
iPress several times until the desired view appears.
²Resetting Max/Min values:
1Press several times until the desired view appears.
2Press and hold until ---- appears.
3Repeat steps 1and 2for all values that are to be reset.
²Switching the instrument off:
iPress and hold until the display goes out.
Maintaining the product
±Changing batteries:
1To open the battery compartment, push the battery cover
down.
2Remove used batteries and insert new batteries
(2x 1.5 V type AAA). Observe the polarity!
3To close the battery compartment, push the battery cover
back on.
±Cleaning the housing:
iClean the housing with a moist cloth (soap suds) if it is dirty.
Do not use aggressive cleaning agents or solvents!
Maintaining the product
Tips and assistance 17
Tips and assistance
Questions and answers
Question Possible causes/solutions
Hi or Lo · Readings outside the measuring range (too high, too
low): Keep to the permitted measuring range.
· Residual capacity <10 min: Change batteries.
de
enfresitptsvnl????
Notes18
0973.5111/03/Sh/dr/10.04.2008
Test Equipment Depot - 800.517.8431
99 Washington Street,Melrose, MA 02176
TestEquipmentDepot.com
Andere Handbücher für 511
4
Inhaltsverzeichnis
Andere TESTO Messgerät Handbücher
TESTO
TESTO 540 Bedienungsanleitung
TESTO
TESTO 330-1G Bedienungsanleitung
TESTO
TESTO 556 Bedienungsanleitung
TESTO
TESTO 416 Bedienungsanleitung
TESTO
TESTO 350 S Anleitung zur Verwendung
TESTO
TESTO 410-2 Bedienungsanleitung
TESTO
TESTO 300 Bedienungsanleitung
TESTO
TESTO 400 Handbuch
TESTO
TESTO 330-1 LL Referenzhandbuch
TESTO
TESTO 6448 Bedienungsanleitung
TESTO
TESTO 535 Bedienungsanleitung
TESTO
TESTO 300 LL Bedienungsanleitung
TESTO
TESTO 755-1 Bedienungsanleitung
TESTO
TESTO 177-T1 Bedienungsanleitung
TESTO
TESTO 0600.9430 Bedienungsanleitung
TESTO
TESTO 0555 6451 Bedienungsanleitung
TESTO
TESTO 335 Bedienungsanleitung
TESTO
TESTO 511 Bedienungsanleitung
TESTO
TESTO Saveris Bedienungsanleitung
TESTO
TESTO 830-T4 Bedienungsanleitung
