Textron GREENLEE CJS-100 Bedienungsanleitung

CJS-100

Digital Open Jaw Meter

INSTRUCTION MANUAL

Read and understand all of the instructions and

safety information in this manual before operating or

servicing this tool.

English ...................1–14

Français ...............15–28

Italiano ................. 29–42

Deutsch................43–56

Español.................57–70

Português.............71–84

Nederlands........... 85–98

Description

The Greenlee CSJ-100 Digital Open Jaw Meter is a hand-held testing device with

the following measurement capabilities: AC current, AC or DC voltage, and resis-

tance. It also checks diodes, veriﬁes continuity, and detects electric ﬁelds (EF).

Safety

Safety is essential in the use and maintenance of Greenlee tools and equipment.

This instruction manual and any markings on the tool provide information for

avoiding hazards and unsafe practices related to the use of this tool. Observe all

of the safety information provided.

Purpose of This Manual

This instruction manual is intended to familiarize all personnel with the safe

operation and maintenance procedures for the Greenlee CSJ-100 Digital Open

Jaw Meter.

Keep this manual available to all personnel.

Replacement manuals are available upon request at no charge at

www.greenlee.com.

KEEP THIS MANUAL

All speciﬁcations are nominal and may change as design improvements occur. Greenlee

Textron Inc. shall not be liable for damages resulting from misapplication or misuse of its

products.

® Registered: The color green for electrical test instruments is a registered trademark of

Greenlee Textron Inc.

Do not discard this product or throw away!

For recycling information, go to www.greenlee.com.

Lifetime Limited Warranty

Greenlee Textron Inc. warrants to the original purchaser of these goods

for use that these products will be free from defects in workmanship and

material for their useful life, excepting normal wear and abuse.

This warranty is subject to the same terms and conditions contained in

Greenlee Textron Inc.’s standard one-year limited warranty.

CJS-100

Important Safety Information

Electric shock hazard:

Contact with live circuits could result in severe injury

or death.

Read and understand this material before operating

or servicing this equipment. Failure to understand

how to safely operate this tool could result in an

accident causing serious injury or death.

This symbol is used to call your attention to hazards or unsafe practices

which could result in an injury or property damage. The signal word, deﬁned

below, indicates the severity of the hazard. The message after the signal word

provides information for preventing or avoiding the hazard.

SAFETY ALERT SYMBOL

Immediate hazards which, if not avoided, WILL result in severe injury or death.

Hazards which, if not avoided, COULD result in severe injury or death.

Hazards or unsafe practices which, if not avoided, MAY result in injury or

property damage.

Important Safety Information

Electric shock and ﬁre hazard:

• Do not expose this unit to rain or moisture.

• Do not use the unit if it is wet or damaged.

• Use this unit for the manufacturer’s intended purpose only, as described in

this manual. Any other use can impair the protection provided by the unit.

Failure to observe these warnings could result in severe injury or death.

Electric shock hazard:

• Do not operate with the case or battery door open.

• Before opening the case or battery door, remove the test leads (or jaw)

from the circuit and shut off the unit.

Failure to observe these warnings could result in severe injury or death.

Electric shock hazard:

• Using this unit near equipment that generates electromagnetic interfer-

ence can result in unstable or inaccurate readings.

• Unless measuring voltage or current, shut off and lock out power. Make

sure that all capacitors are discharged. Voltage must not be present.

Failure to observe these warnings could result in severe injury or death.

CJS-100

Important Safety Information

Electric shock hazard:

• Do not attempt to repair this unit. It contains no user-serviceable parts.

• Do not expose the unit to extremes in temperature or high humidity. Refer

to “Speciﬁcations.”

Failure to observe these precautions may result in injury and can damage the

unit.

Electric shock hazard:

Do not change the measurement function while the test leads are connected

to a component or circuit.

Failure to observe this precaution may result in injury and can damage the

unit.

Identiﬁcation

1. Jaw

2. EF indicator

3. Display

4. Hold/toggle button

5. EF button

6. Selector switch

7. Negative, common (COM), or ground input

terminal

8. Volts or resistance (V-Ω) input terminal

Symbols on the Unit

Warning—Read the instruction manual

Risk of electric shock

Double insulation

Battery

Recycle product in accordance with manufacturer’s directions

Display Icons

9. Hold function is enabled.

10. A Amps

11. V Volts

12. Ω Ohms

13. k kilo (103)

14. M Mega (106)

15. Continuity mode

16. Auto ranging is enabled.

17. Diode mode

18. AC measurement is selected.

19. –Negative polarity indicator

20. DC measurement is selected.

21. Low battery indicator

22. O.L Overload indicator

9101112131415

CJS-100

Using the Features

• Selector Switch

Turn switch to desired mode of operation:

(AC voltage)

(DC voltage)

(resistance)

(diode/continuity)

(AC current)

Return switch to OFF position when not in use.

• Hold/Toggle Button

Momentarily press to select diode or continuity mode.

Press momentarily to hold the present value on the display. will appear on

the display. Press again to return to normal mode.

• EF Button

Press and hold to detect the electric ﬁeld that surrounds current-carrying

conductors. Refer to the “Typical Measurements” section.

• Auto Power Off

The unit automatically shuts off after approximately 15 minutes of inactivity.

Operation

1. Set the selector switch according to the Settings Table.

2. Refer to “Typical Measurements” for speciﬁc measurement instructions.

3. Test the unit on a known functioning circuit or component.

• If the unit does not function as expected on a known functioning circuit,

replace the battery.

• If the unit still does not function as expected, send the unit to Greenlee

for repair.

4. Take the reading from the circuit or component to be tested.

Settings Table

* AC current measurements are made using the jaw. Refer to “Typical

Measurements” for speciﬁc measurement instructions.

To measure

this value …

Connect

red

lead

to …

Connect

black

lead

to …

Momentarily press

the Hold/Toggle

Button until this

icon appears

on the display …

Set the

Selector

Switch

to this

symbol …

Diode V-Ω COM

Continuity V-Ω COM

To measure

this value …

Connect

red

lead

to …

Connect

black

lead

to …

This icon appears

on the display …

Set the

Selector

Switch

to this

symbol …

DC Voltage V-Ω COM

AC Voltage V-Ω COM

Resistance V-Ω COM

AC Current* N/A N/A

Electric shock hazard:

Contact with live circuits could result in severe injury

or death.

CJS-100

Typical Measurements

Voltage Measurement

Resistance Measurement

Typical Measurements

AC Current

Measurement

Diode Measurement

Forward Bias

Reverse Bias

Clamp Around Wire

Notes:

• Please the jaw around one

conductor only.

• Center the wire in the jaw for

highest accuracy.

Inhaltsverzeichnis

Sprachen:

Andere Textron Messgerät Handbücher

Textron

Textron Greenlee CLM-1000 Bedienungsanleitung

Textron

Textron HDE HALO Bedienungsanleitung

Textron

Textron GREENLEE CMGRT-100A-C Bedienungsanleitung

Textron

Textron GREENLINE 920XC Series Installationsanleitung

Textron

Textron HDE Bradford White DDPM-40 Bedienungsanleitung

Textron

Textron Greenlee CM-1360 Bedienungsanleitung

Textron

Textron Greenlee 200EP Bedienungsanleitung

Textron

Textron Greenlee 5878 Bedienungsanleitung

Textron

Textron Greenlee CM-800 Bedienungsanleitung

Textron

Textron Keithley System SourceMeter 2601B-PULSE Bedienungsanleitung

Textron

Textron Tempo Marker-Mate EML 100 Bedienungsanleitung

Textron

Textron Greenlee 570XL Series Bedienungsanleitung

Textron

Textron GREENLEE CMI-2000 Bedienungsanleitung

Textron

Textron HD Electric Proof Tester PT-5000 Bedienungsanleitung

Textron

Textron Greenlee CM-450 Bedienungsanleitung

Textron

Textron Greenlee CMT-90 Bedienungsanleitung

Textron

Textron HDE HVA-2000 Bedienungsanleitung

Textron

Textron Greenlee CM-660 Bedienungsanleitung

Textron

Textron Greenlee CM-600 Bedienungsanleitung

Textron

Textron Greenlee CM-1300 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung