TFA 35.1064.10.50.IT Bedienungsanleitung

WIRELESS 868MHZ WEATHER STATION

Instruction Manual

Cat. No. 35.1064.10.50.IT

Thank you for choosing this wireless weather station from TF .

BEFORE YOU USE IT

Pl as b sur to r ad th instruction manual car fully.

This information will help you to familiarise yourself with your new device, learn all of its

functions and parts, find out important details about its first use and how to operate it, and

get advice in the event of faults.

Following the instruction manual for use will prevent damage to the device and loss of your

statutory rights arising from defects due to incorrect use.

W shall not b liabl for any damag occurring as a r sult of not following th s

instructions.

Lik wis , w tak no r sponsibility for any incorr ct r adings and for

any cons qu nc s which may r sult from th m.

Pl as tak particular not of th saf ty advic !

Pl as look aft r this manual for futur r f r nc .

SCOPE OF SUPPLY:

•

Weather station (basic unit)

•

Outdoor transmitter

•

Batteries (4 x , IEC LR6, 1.5V)

•

Instruction manual

FIELD OF OPERATION AND ALL OF THE BENEFITS OF YOUR NEW WEATHER

STATION AT A GLANCE:

•

DCF-77 Radio controlled time with manual setting options

•

DCF Time reception ON/OFF

•

12/24 hour display

•

Hour, minute and second time display

•

Calendar (weekday, date, month and year)

•

Time zone option –2h to +5h

•

larm with snooze function

•

Snooze setting

•

Weather forecasting with 15 easy-to-read weather forecast signs featured by

"Weather boy"

•

Weather forecasting icon sensitivity setting

•

Temperature display in degrees Celsius (°C) or Fahrenheit (°F) selectable

•

Indoor and outdoor temperature display with MIN/M X recording

•

Indoor humidity reading displayed as RH% with MIN/M X recordings

•

ll MIN/M X temperature recordings show date and time received

•

ll MIN/M X recordings can be reset

•

Display of sunrise time, sunset time and sun duration in 39 cities

•

12 moon phases display throughout the year

•

Can take up to three outdoor transmitters

•

LCD contrast setting

•

Low battery indicator

•

LED backlight

•

Table standing/ wall mounting

FOR YOUR SAFETY:

•

The product is exclusively intended for the field of application described above. The

product should only be used as described within these instructions.

•

Unauthorised repairs, modifications or changes to the product are prohibited.

•

The product is not to be used for medical purpose or for public information, but is

intended solely for home use.

Caution!

Risk of injury:

•

Keep this instrument and the batteries out of reach of children.

•

Batteries must not be thrown into the fire, short-circuited, taken apart or recharged.

Risk of explosion!

•

Batteries contain harmful acids. Low batteries should be changed as soon as possible

to prevent damage caused by a leaking battery. Never use a combination of old and

new batteries together or batteries of different types. Wear chemical-resistant

protective gloves and glasses when handling leaked batteries.

LCD display

Function keys

! Important information on product saf ty!

•

Do not expose the instrument to extreme temperatures, vibration or shock.

•

The outdoor transmitter is protected against splash water, but is not watertight.

Choose a shady and dry position for the transmitter.

ELEMENTS

Th w ath r station

Foldout stand

Battery compartment cover

Function keys

Hanging hole

Function key

Th outdoor t mp ratur transmitt r

•

Remote transmission of outdoor temperature to weather

station by 868 MHz

•

Shower proof casing

•

Wall mounting case

•

Mounting at a sheltered place. void direct rain and

sunshine

INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER

The temperature transmitter uses 2 x , IEC LR6, 1.5V battery. To

install and replace the batteries, please follow the steps below:

1. Remove the battery compartment cover at the back of the

transmitter.

2. Insert the batteries, observing the correct polarity (see

marking).

3. Replace the battery compartment cover on the unit.

INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

The weather station uses 2 x , IEC LR6,

1.5V batteries. To install and replace the

batteries, please follow the steps below:

1. Remove the cover at the back of the

weather station.

2. Insert batteries observing the correct

polarity (see marking).

3. Replace compartment cover.

Batt ry r plac m nt

•

Replace the batteries when the battery symbol of the weather station appears above

the indoor temperature.

•

When the batteries of the transmitter are used up, the low battery icon appears above

the outdoor temperature display.

Not :

In the event of changing batteries in any of the units, all units need to be reset by following

the setting up procedures. This is because a security code is assigned by the transmitter at

start-up and this code must be received and stored by the weather station in the first 3

minutes of power being supplied to it.

SETTING UP:

When one transmitter is used:

1. First, insert the batteries into the temperature transmitter. (see “Install and r plac

batt ri s in th t mp ratur transmitt r“).

2. Immediately after and within 45 seconds, insert the batteries into weather station (see

“Install and r plac batt ri s in th w ath r station”). Once the batteries are in

place, all segments of the LCD will light up briefly. Following the time as 0:00 and the

"Weather boy" icon will be displayed. If these are not displayed after 60 seconds,

remove the batteries and wait for at least 10 seconds before reinserting them.

3. fter inserting the batteries, the weather station will start receiving data from the

transmitter. The outdoor temperature and the signal reception icon should then be

displayed on the weather station. If this does not happen after 3 minutes, the batteries

will need to be removed from both units and reset from step 1.

4. In order to ensure sufficient 868 MHz transmission however, this should under good

conditions be a distance no more than 100 meters between the final position of the

weather station and the transmitter (see notes on “Positioning” and “868 MHz

R c ption”).

5. Once the remote temperature has been received and displayed on the weather

station, the DCF time (radio controlled time) code reception is automatically started

after 30 seconds. This takes typically between 3-5 minutes in good conditions. If after

10 minutes, the DCF time has not been received, press the SET button to manually

enter a time initially.

When more than one transmitter is used:

1. User shall remove all the batteries from the weather station and transmitters and wait

for 60 seconds if setting has been done with one transmitter before.

2. Insert the batteries to the first transmitter.

3. Within 25 seconds of powering up the first transmitter, insert the batteries to the

weather station. Once the batteries are in place, all segments of the LCD will light up

briefly. Following time as 0:00 and the weather boy icon will be displayed. If they are

not shown in LCD after 60 seconds, remove the batteries and wait for at least 60

seconds before reinserting them.

4. The outdoor temperature from the first transmitter (channel 1) should then be

displayed on the weather station. lso, the signal reception icon will be displayed. If

this does not happen after 2 minutes, the batteries will need to be removed from both

units and reset from step 1.

5. Insert the batteries to the second transmitter as soon as the outdoor temperature

readings from the first transmitter are displayed on the weather station.

Not : User shall insert the batteries into the second transmitter within 10 seconds of

reception of the first transmitter.

6. The outdoor data from the second transmitter and the "channel 2" icon should then be

displayed on the Weather station. If this does not happen after 2 minute, the batteries

will need to be removed from all the units and reset from step 1.

7. Insert the batteries to the third transmitter as soon as the "channel 2" icon and outdoor

data are displayed on the weather station. Then within 2 minutes, the channel 3

outdoor data from the third transmitter will be displayed and the channel icon will

display "3" once the third transmitter is successfully received. If this is not happen,

user shall restart the setting up from step 1.

Not :

•

User shall insert the batteries into the third transmitter within 10 seconds of reception

of the second transmitter.

•

nd user may require to check the displayed readings on the weather station against

those shown on the transmitters in order to recognize the channel no. of each

transmitter.

8. In order to ensure sufficient 868 MHz transmission however, this should under good

conditions be a distance no more than 100 meters between the final position of the

weather station and the transmitter (see notes on “Positioning” and “868 MHz

R c ption”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not followed as

described above. Should transmission problems occur, it is necessary to remove the

batteries from all units and start again the set-up from step 1.

9. Once the remote temperature has been received and displayed on the weather

station, the DCF time (radio controlled time) code reception is automatically started.

This takes typically between 3-5 minutes in good conditions. If after 10 minutes, the

DCF time has not been received, press the SET button to manually enter a time

initially.

DCF RADIO CONTROLLED TIME

The time base for the radio controlled time is a Cesium tomic Clock operated by the

Physikalisch Technische Bundesanstalt Braunschweig which has a time deviation of less

than one second in one million years. The time is coded and transmitted from Mainflingen

near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of

approximately 1,500 km. Your radio-controlled clock receives this signal and converts it to

show the precise time in summer or wintertime.

The quality of the reception depends greatly on the geographic location. In normal cases,

there should be no reception problems within a 1,500 km radius of Frankfurt.

DCF reception is done twice daily at 02:00 and 03:00 am. If the reception is not successful

at 03:00 am, then the next reception takes place the next hour and so on until 06:00am, or

until the reception is successful. If the reception is not successful at 06:00 am, then the next

attempt will take place the next day at 02:00 am.

If the tower icon flashes, but does not set the time or the DCF tower does not appear at all,

then please take note of the following:

•

Recommended distance to any interfering sources like computer monitors or TV sets

is a minimum of 1.5 - 2 meters.

•

Within ferro-concrete rooms (basements, superstructures), the received signal is

naturally weakened. In extreme cases, please place the unit close to a window and/ or

point its front or back towards the Frankfurt transmitter.

Inhaltsverzeichnis

Andere TFA Wetterstation Handbücher

TFA

TFA GAIA Bedienungsanleitung

TFA

TFA Weather PRO Bedienungsanleitung

TFA

TFA 47.3004 Bedienungsanleitung

TFA

TFA 30.3016.01.IT Bedienungsanleitung

TFA

TFA 35.1093 Bedienungsanleitung

TFA

TFA WS-9135N Bedienungsanleitung

TFA

TFA 30.5042 Bedienungsanleitung

TFA

TFA Pure 30.3043 Bedienungsanleitung

TFA

TFA 35.1104 Bedienungsanleitung

TFA

TFA FAKTUM 35.1101 Bedienungsanleitung

TFA

TFA ECO Solar Bedienungsanleitung

TFA

TFA 35.1066 Meteo Max Bedienungsanleitung

TFA

TFA METRO PLUS Bedienungsanleitung

TFA

TFA AXIS 35.1079 Bedienungsanleitung

TFA

TFA Weather Station Bedienungsanleitung

TFA

TFA WS-9630N Bedienungsanleitung

TFA

TFA 30.3054 Bedienungsanleitung

TFA

TFA 35.1163.01 Bedienungsanleitung

TFA

TFA 30.3030.IT Bedienungsanleitung

TFA

TFA Crystal Cube Bedienungsanleitung

TFA

TFA 35.1134 Bedienungsanleitung

TFA

TFA VIEW BREEZE Bedienungsanleitung

TFA

TFA 35.1129 Bedienungsanleitung

TFA

TFA EXACTO Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86371 Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2210 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-811561 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung