The Handy THSSALT Bedienungsanleitung
01/02/2018
125LB (56.8kgs)
PUSH SALT SPREADER
Model No: THSSALT -- Product No: 1938134001
DO NOT USE WITH ROCK SALT.
Using rock salt in this spreader will damage the mechanism and shorten the life of the product.
Refined ice melting salt can be used, but the user should be aware that using salt may corrode
certain components of the spreader and reduce the life of the machine.
Clean the spreader thoroughly after using refined de-icing salt.
ASSEMBLY REQUIRED
SAVE THESE INSTRUCTIONS
SPARES & SUPPORT: 01793 333212
Please read & understand this manual, payingattention to the safety instructions, before use.
The manufacturer reserves the right to change the product specification and livery according to
continued product improvements.
Images used are for illustration purposes only
INSTRUCTION MANUAL
THS
THS
CONTENTS
SPECIFICATIONS
IMPORTANT INFORMATION
GENERAL SAFETY INSTRUCTIONS
KNOW YOUR MACHINE
COMPONENTS
ASSEMBLY
ADJUSTMENTS
OPERATION
RATE SETTINGS
MAINTENANCE
PARTS DIAGRAM & LIST
WARRANTY
NOTES
ASSEMBLY IS REQUIRED
This product requires assembly before use. See the “Assembly” section for instructions.
Please check that all parts required for the assembly of this spreader are included. If for any
reason, you believe a part for the assembly is missing or damaged, please contact us.
If you require any assistance with regards to the contents or operation of
your machine, please contact us:
TEL: 01793 333212
(MON –FRI 8.00AM TO 5.30PM EXCL. BANK HOLIDAYS)
DO NOT USE WITH ROCK SALT.
Using rock salt in this spreader will damage the mechanism and shorten the life of the product.
Refined ice melting salt can be used, but the user should be aware that using salt may corrode
certain components of the spreader and reduce the life of the machine.
Clean the spreader thoroughly after using refined de-icing salt.
SPECIFICATIONS
The manufacturer reserves the right to change the product specification and livery according to
continued product improvements.
Model
THSSALT
Product Number
1938134001
Capacity (Weight)
56.8kg (125lb)
Hopper Dimensions (cm)
74.9 x 41.9 x 34
Overall Dimensions (cm)
109.9 x 80 x 96.5
Product Weight (kgs)
18.5
Tyre Rating
2 Ply
Tyre Maximum PSI
20psi (Do not exceed)
IMPORTANT INFORMATION
INTENDED USE
The product is intended for spreading granular material for domestic gardens. This product is not
intended for commercial use. Generally acknowledged accident prevention regulations and enclosed
safety instructions must be observed.
ONLY REFINED ICE MELTING SALT CAN BE USED WITH THIS PRODUCT.
Only perform work described in these instructions for use, any other use is incorrect. The
manufacturer will not assume responsibility for damage resulting from such use.
GENERAL SAFETY INSTRUCTIONS
Read and understand the owner’s manual
and labels affixed to the product. Learn its
application and limitations as well as the
specific potential hazards. Retain these
instructions for future reference. The
operator is responsible for following the
warnings & instructions in this manual and
on the product.
STAY ALERT
Do not operate the machine while under the
influence of drugs, alcohol, or any medication
that could affect your ability to use it
properly. Do not use this machine when you
are tired or distracted from the job at hand.
Be aware of what you are doing at all times.
Use common sense.
AVOID DANGEROUS CONDITIONS
Make sure there is adequate surrounding
workspace. Cluttered areas invite injuries.
Keep your work area clean with sufficient
light. Keep the area around the machine clear
of obstructions, grease, oil, rubbish & other
debris which could cause persons to fall onto
moving parts.
INSPECT YOUR MACHINE
Check all bolts, nuts & screws for tightness
before each use, especially those securing
guards & drive mechanisms. Vibration during
use, may cause these to loosen.
Replace damaged, missing or failed parts
before using.
Warning labels carry important information.
Replace any missing or damaged warning
labels.
CRUSH AND CUT HAZARDS
Always keep your hands and feet clear from
moving parts while operating the equipment.
Always keep the work area clean and clear
when operating.
CONDITIONS
We recommend the machine is not used
during winds. This may affect the spreading
pattern.
DRESS PROPERLY
Do not wear loose clothing, gloves, scarfs,
neckties or jewellery (rings, wrist watches),
which can be caught in moving parts.
DO NOT OVERREACH
Keep proper footing and balance at all times
when using the machine. Never stand on the
machine. Serious injury could occur if the
machine is tipped or if the moving parts are
unintentionally contacted. Do not store
anything above or near the machine, where
anyone might stand on the machine to reach
them.
AVOID INJURY FROM UNEXPECTED
ACCIDENT
Keep hands & feet out of the way of all
moving parts. Do not place any part of your
body or any tool e.g. in moving parts of the
machine during operation.
DO NOT FORCE TOOL
Always work within the rated capacity. Do not
operate for a purpose for which it was not
intended.
MAINTAIN YOUR MACHINE WITH CARE
Clean the machine immediately after use.
Keep the machine clean to ensure it operates
to its full & safest performance. When
maintaining this machine, only the
manufacturer’s original replacement parts
should be used. The use of non-original
manufacturer parts may invalidate your
warranty.
PROTECT THE ENVIRONMENT
Take left over materials to an authorised
collection points or follow the stipulations in
the country where the machine is used. Do
not discharge into drains, soil or water.
STORE IDLE EQUIPMENT
When not in use, the machine should be
stored in a dry location. Keep the machine
away from children and others not qualified
to use it.
OPERATION SPEED
Do not exceed 10mph, to avoid personal
injury and/or equipment damage.
TYRE INFLATION
Before operating, make sure the tyres have
the recommended pressure of 20 PSI (Do not
exceed 20 PSI). We recommend the use of
FOOT or HAND manual inflation devices only.
This is a garden/domestic product, therefore
extended use over abrasive surfaces (e.g.
concrete, tarmac etc.) could cause premature
wear on the tyres.
SAFETY SYMBOLS
Safety alert symbol. Used to alert you to
potential personal injury hazards. Obey all
safety messages that follow this symbol to
avoid possible injury.
DANGER
Indicates an imminently hazardous situation
which, if not avoided, will result in serious
injury.
WARNING
Indicates a potentially hazardous situation
which, if not avoided, could result in serious
injury.
CAUTION
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
CAUTION
Used without the safety alert symbol indicates
a potentially hazardous situation which, if not
avoided, may result in property damage.
KNOW YOUR MACHINE
Read this owner’s manual before operating the equipment. Familiarise yourself with the location
and function of the controls and features. Save this manual for future reference.
1. T-Handle –Pushes and moves the spreader easily.
2. Flow Control –Controls the flow of material being spread
3. Hopper –Do not exceed rated load capacity 125lb (56.8kgs).
4. Impeller - Evenly distributes material.
5. Tyre/Wheel –Do not exceed recommended inflation rated 20 PSI.
6. Support Leg –Stabilizes load and spreader, when stationary.
1
2
3
4
5
6
COMPONENTS
NOTE: Parts Lists are supplied for information purposes only, not all parts are stocked individually & we recommend
you contact our Spares Team on 01793 333212 for expert advice.
ASSEMBLY
RECOMMENDED TOOLS REQUIRED
•Pliers
•Adjustable Spanner
•10mm Wrench x2
•13mm Wrench
STEP 1 - Wheels
•When assembling the wheels make sure the air valves are facing outward.
•Slide the wheel bushing (#19) onto the left side of the axle.
•Push one wheel (#15) onto the axle. Align the hole in the axle and wheel and insert the M6x60
bolt (#24) and secure with a M6 lock nut (#9).
•Slide the other wheel bushing (#19) onto the right side of the axle.
•Push the wheel (#15) onto the axle. Slip the Ø16 flat washer (#17) and insert the Ø5x35 cotter
pin (#16) into the hole and fasten it by bending.
STEP 2 –Attach Handle to Support Leg
•Insert handle assembly into the supporting leg (#39). In the center holes put two M6x35 bolts
(#40), Ø6 spring washer (#55) and secure with M6 lock nut (#9).
•On the outer holes of the handle assembly and supporting leg (#39) put four M6x20 bolts (#47),
Ø6 spring washers (#55) and secure with M6 lock nuts (#9).
Flange
Outer
Holes
Centre
Holes
STEP 3 –Connecting Linkage
•Push the flow control handle to the “30” position. Insert the A end of the connecting rod (#34)
through the Ø8 flat washer (#12) and into the hole on the gauge level plate (#46). Secure with a
M8 lock nut (#11).
•Insert the B end of the connecting rod (#34) through the Ø8 flat washer (#12) and into the hole
on the fixed plate (#13). Secure with M8 lock nut (#11).
•Push the control handle to the “0” position. The hole in the bottom of the spreader should be
completely closed.
ADJUSTMENTS
STEP 4
When you have finished all the above steps, if the hole at the bottom of hopper cannot be closed
and opened completely by using the handle you may need to the follow these additional steps.
•If the flow control handle position and the hole in the bottom of the hopper does match exactly,
loosen the two bottom M6 lock nuts (#9) and move the gauge level plate until the handle
position and the hole in the bottom of the hopper match.
•Re-tighten the two M6 lock nuts (#9).
To operate this spreader, push the handle to the lowest position (downwards). You may move the
position of the Wing nut on the Gauge & Lever to adjust the space on the hole between the
hopper and the adjustable plate as per your need when spreading.
A
B
Andere Handbücher für THSSALT
1
Inhaltsverzeichnis
Andere The Handy Streuer Handbücher
The Handy
The Handy THS80 Montage- und Wartungsanleitung
The Handy
The Handy THS125 Bedienungsanleitung
The Handy
The Handy THTS Bedienungsanleitung
The Handy
The Handy THSS100 Bedienungsanleitung
The Handy
The Handy THDS Montage- und Wartungsanleitung
The Handy
The Handy THTS Bedienungsanleitung
The Handy
The Handy THDS Bedienungsanleitung
The Handy
The Handy THS125 Montage- und Wartungsanleitung
The Handy
The Handy THS50 Bedienungsanleitung
The Handy
The Handy THSSALT Montage- und Wartungsanleitung
The Handy
The Handy THS125HDUTY Bedienungsanleitung
The Handy
The Handy THTS175 Bedienungsanleitung
The Handy
The Handy THS70HDUTY Bedienungsanleitung
The Handy
The Handy THS50 Montage- und Wartungsanleitung
The Handy
The Handy THS80 Bedienungsanleitung
The Handy
The Handy THS80 Bedienungsanleitung
The Handy
The Handy THSS80 Bedienungsanleitung
Beliebte Streuer Handbücher anderer Marken
Fisher
Fisher POLY-CASTER 78601 Bedienungsanleitung
TurfEx
TurfEx RS7200 Betriebsanleitung
Ferris
Ferris Pathfinder Series Bedienungsanleitung
Fayat Group
Fayat Group DYNAPAC S100 Fehlerbehebungshandbuch
Art's-Way Manufacturing
Art's-Way Manufacturing X700 Installations- und Betriebshandbuch
EASTMAN
EASTMAN CR 500 Bedienungsanleitung
