Theben Time Guard MLBPRO500C Handbuch

Installation & Operating Instructions

500W “C” Class Halogen

Floodlight with 240º

PIR Control

Model: MLBPRO500C (Black)

Model: MLWPRO500C (White)

1 Introduction

Thank you for choosing the MLB/WPRO500C. It is our new generation of sensor

light technology, providing beneﬁts in better performance and a quick and easy

installation compared with other sensor lights on the market. It is integrated with

years of experience and broad expertise in manufacturing sensor detectors and

sensor lights for professional use.

The MLB/WPRO500C has the following outstanding features and superior functions

that will meet most of your needs.

• Fully adjustable ﬂoodlight left or right 45º, up 50º and down 35º.

• Floodlight ﬁxed by hand, no tools needed.

• Aluminium alloy light weight body: Heavy duty and durable.

• Polycarbonate material sensor, giving good weatherproof performance.

• Additional three 500W halogen ﬂoodlights can be connected.

• High quality professional bulb sockets for no more contact problems.

• Plug-in terminal block for quick and easy wire free connection and convenient

replacement of the light bulb.

• Adjustable lens giving a 240º outer zone from 3 to 16m and a 360º inner zone

giving comprehensive coverage within a 3m radius circle.

• Multi-segmented lens shields included for blocking zones within a detection area.

Each segment blocking a detection angle of 10º.

• Rotatable sensor head from left 60º to right 60º to reposition detection zone.

• Environmental protection: IP44.

• Three user friendly adjustments for LUX, TIME and METER (range restriction).

• Wall and corner mounting brackets supplied.

• Energy saving integral photocell allows automatic operation at night only.

2 Contents in Package

Article Quantity Note

MLB/WPRO500C 1 See Fig. 1a

Instructions 1

Accessories See Fig. 1b

Fig. 1b

Corner Mounting

Adapter Lens Shield

Halogen

Bulb

Large

Pan Head

Screw

Small

Pan Head

Screw

Small

c/sk Head

Screw

Blind

Grommet

Glass Frame

Light Body

Outer Ring

Sensor Head

Backplate

Accessories

Fig. 1a

Motion Sensor Light

3 PIR Coverage

The MLB/WPRO500C should be installed within the height range 2.0m to 2.5m.

(See Fig. 2).

The unit has an adjustable lens with two detection zones.

• The outer zone covers an angle of 240º to a distance of approx. 3m to 16m at an

installation height of 2.3m. (See Fig. 3).

• The inner zone covers an angle of 360º which allows detection immediately

behind the MLB/WPRO500C. (See Fig.4).

• Fig. 4 also shows the variation of sensitivity with angle of approach for a person

moving within the detection area.

Fig. 2

Fig. 4

Fig. 3

Side View

2.3m

16m

240°

Min.

35° 45°

500mm

200mm

16m 16m

7m 7m

4m 4m

34 730

Top View

Most

Sensitivity

Least

Sensitivity

4 Installation

Installation shouild only be carried out by a competent person.

Switch Off the Mains Power Supply Before Installation

The MLB/WPRO500C can be either wall mounted or corner mounted with an

adapter included with the product. (See Fig. 5).

Fig. 5

Wall Mount

Fig. 5a

Corner Mount

Fig. 5b

Corner Mounting Adapter

(See section B)

Fig. 6 Fig. 7

A Installation Procedure

a. Read the instruction manual before installing the MLB/WPRO500C.

b. Make sure the mains power supply has been disconnected.

c. Decide the best location to install the unit bearing in mind the most sensitive

direction of movement shown in Fig. 4.

Then ensure that the top of the ﬂoodlight is no closer than 200mm to the surface

above it and it is no closer than 500mm to the surface at the side of it.

(See Fig. 6).

Also ensure that any surface directly illuminated by the ﬂoodlight is at least 1m

away from the front glass. (See Fig. 8).

Do not mount the unit base on a horizontal surface such as a sofﬁt,

(See Fig. 7) or on an inﬂammable surface such as wood or plastic.

Cautions in use:

• If the ﬂoodlight glass is cracked, replace it immediately before further use.

• The surface of the ﬂoodlight cover and glass get extremely hot when the lamp

has been on for some time. Do not touch and keep combustible materials away.

• Additional lighting of up to three 500W class C ﬂoodlights or 1.5kW of other

approved ﬁlament lighting may be connected. (See Fig 12).

Fig. 8

MLB/WPRO500C

Fig. 9 Fig. 10

Front Glass

Floodlight

Cover Screws

Fitting

Contact

Bulb Contact

1 m Min.

Fig. 11

Fig. 12b

Fig. 13 Fig. 14

Backplate

Backplate Connections Wiring Diagram

ON/OFF

switch

Up to an

additional

three 500W

halogens or

up to 200W

of low energy

lighting

Cable entry

knock outs

Switch

terminal

Fixing hole

L1connections on up to four

MLB/WPRO500C's can be

connected together and then to

additional lights if allowable, so

that any of these units will bring

all the lights ON if triggered. The

total lamp load is limited to a

single units capacity.

Override switch

(if required)

L1L

d. Install bulb:

1. Remove the lamp cover screws retaining front glass frame (See Fig. 9) and swing

the glass frame away from the ﬂoodlight cover.

2. Check that the bulb and ﬁtting contacts are all clean, ensuring that you hold the

bulb with a clean dry cloth during this and subsequent procedures.

3. Locate one of the bulb contacts onto one of the ﬁtting contacts and push back

the contact spring at the other end inserting the bulb contact into its ﬁtting

contact. check that the bulb contacts at each end are properly located and that

there is reasonable pressure on the bulb contacts. (See Fig. 10).

4. Tighten the ﬂoodlight cover screws ﬁrmly to ensure weatherproof rating.

e. Make backplate holes and cable up:

Decide which of the four 20mm dia. cable entry holes on the back plate you wish to

use (there are 2 rear entry and 2 bottom entry).

if you wish to use additional lighting a second entry point will be required (a manual

override switch can be accommodated by a single entry of 4 core cable). Firstly cut

undersize holes as required in the blind grommets supplied. This way sealing against

moisture inﬂux is maintained. Then score around the outside edge of the circular

groove marking the hole with a sharp knife and gently tap out the centre. Do the same

to the second entry point if necessary and ﬁt the grommet(s) supplied and push the

cable(s) in to give sufﬁcient length to make a connection for all the cable wires.

f. Fix backplate:

Fix the backplate onto the wall with the large pan head screws supplied using

wall plugs if necessary (See Fig. 11) remembering the cable entry holes are on the

bottom. connect cable wires as necessary. (See Fig. 12).

g. Insert the sensor light onto the backplate (See Fig. 13). Then ﬁx with the two

small c/sk head screws supplied. (See Fig.14).

Fig. 12a

B Installation of Corner Mounting

Adapter (Option)

a. Make hole(s) in the wall plate as required and insert grommets.

b. Make hole(s) if any in the corner mounting adapter (none will be required if only

the bottom entry hole(s) are in use on the backplate).

c. Fix the backplate to the corner mounting adapter using the 3 large pan head

screws supplied (used to ﬁx the backplate to the wall when the adapter is not

in use).

d. Proceed as for (Ae) above, ﬁnally ﬁxing the

corner mounting adapter and backplate

assembly onto the corner using the 2 pan

head screws supplied and wall plugs if

necessary. The holes used are on the outside

edges of the corner mounting adapter.

(See Fig.15).

Fig. 16 Fig. 17 Fig. 18 Fig. 19

C To Avoid Nuisance Triggering

Your motion sensor may be activated by animals, light reﬂective surfaces, heat

sources, or movement of objects. The following guidelines will help you avoid

nuisance triggering.

• Do not aim the sensor toward lights of any kind. (See Fig. 16, 17). Aim the sensor

and light in a different direction.

D The Adjustments of MLB/WPRO500C:

a. Adjustment of the sensor head

The bottom part of the sensor head can be horizontally rotated 60º to right or

left. (As shown in Fig. 20).

b. Adjustment of the ﬂoodlight

You can adjust horizontally right or left 45º. (See Fig. 21).

c. The Adjustment of LUX, METER and TIME

The MLB/WPRO500C has three adjustable knobs, LUX, METER and TIME on the

underside of the sensor head.

• The LUX knob can be set to allow the MLB/WPRO500C to operate at any light

level between full daylight and almost complete darkness.

• The METER knob reduces the forward PIR range from around 16m to around 3m.

• The TIME knob can adjust the time (a period between 6 seconds and

approximately 12 minutes) for the light to remain “ON” after the last detection.

Following the adjustment procedure below, you can adjust the ﬂoodlight vertically

up 50º and down 35º. (See Fig. 22).

1. Loosen plastic light head screw by hand (See Fig. 23).

2. Adjust ﬂoodlight to the desired elevation.

3. Tighten the plastic light head screw ﬁrmly.

• Avoid aiming the sensor towards objects which may move in the wind, such as

bushes. (See Fig. 18).

• Avoid mounting the sensor near heat sources, such as heating vents, air

conditioners, dryer vents or lights. (See Fig. 19).

• Avoid directing the sensor toward areas or objects whose surfaces are highly

reﬂective such as pools or are subject to rapid temperature change.

Fig. 15

Fig. 20 Fig. 21

Fig. 22 Fig. 23

60º

45º 45º

50º

Light Head

Screw

35º

60º

910

5 Function and Operation

A Lens Shield - function

The lens shield contains 13 segments each of which can be broken in half. Each

segment can block 10º detection angle within the ﬁeld of view by pressing it onto

the outer ring of the sensor head. (See Fig. 25).The segments only work on the

outer 240º zone. The inner 3m radius zone is unaffected.

• How to use:

1. Take the outer ring off the sensor head. (See Fig. 24).

2. Decide on the detecting zone (or zones) that you want to be reduced or blocked.

3. Insert the lens shield segments into the slot of the outer ring as following

illustration (See Fig. 25). Then put the outer ring back into position on the sensor

head. The example shown will have blocked a 30ºdetection angle within the

outer 240º zone.

4. By breaking the outer section of a segment or group of segments the range at

that position in the outer zone will be reduced from 16m to 7m and not 3m.

B Walk Test

The MLB/WPRO500C will start working automatically approx. 3 minutes after the

power is switched ON.

Set the TIME knob to “6 sec.”, the LUX knob to “ ” and the METER knob to

“+” (Factory Presets).

You can start the “Walk Test” in any ambient light level and the light will go on

for about 6 seconds after each detection. While the light is ON and for 2 seconds

afterwards the person carrying out the walk must remain stationary before

continuing on the path shown in Fig. 25.

• How to adjust your desired detecting area(s):

1. Follow Fig. 25 and start the Walk Test across the detection zones to check that the

light under control comes on when entering or leaving a zone. Repeat it and adjust

the METER knob or sensor head until you are satisﬁed with the detection area.

2. To eliminate unrequired detection zones you need to use the lens shield (see 5A

Lens Shield - function).

Notes:

• When using the lens shield or adjusting the knobs, be careful not to damage the lens.

• Conditions below may cause reduction in sensitivity of the sensor.

a. On very foggy nights, sensitivity may be less due to moisture on the lens.

b. On very hot days, sensitivity may be less due to the temperature of the human

body being close to the temperature of the surroundings.

c. On very cold days little heat will be emitted from the body with heavy clothing

and head covering. This may reduce the sensitivity of the sensor.

d. Soap or polish may damage the sensor lens and can cause reduced sensitivity.

Clean with a soft damp cloth only.

Fig. 24 Fig. 25

Outer Ring

Fig. 26

Walk Test Start Finish

11 12

6 Troubleshooting

Each MLB/WPRO500C has undergone rigorous testing under ISO9002 quality

control procedures before it leaves the factory. Malfunctions are most often due to

incorrect installation or adjustment of the unit. If you are experiencing problems,

please check the following ﬁrst.

Problem

Lights

do not

turn ON

Lights

do not

turn OFF

Lights

go ON

and OFF

quickly

Light turn

ON in a

storm

Possible Solution

1. Check if all wiring connections are correct.

2. Turn off power for at least 10 seconds, then on again.

3. Check if all light ﬁxtures are working properly, and the power is

connected correctly to the MLB/WPRO500C.

4. Check if the bulb is seated ﬁrmly with good contacts.

5. Check if the LUX knob is adjusted to the desired light level.

6. Check if the detection angle is right and aimed at the desired area.

1. Set the TIME knob to minimum and check again.

2. Make sure that the unit is not installed looking towards objects

which may move in the wind, such as bushes and that the unit is

mounted securely.

3. Stay away from the detection zone to avoid activating.

4. Make sure that the unit is not looking toward any areas or objects

which have surfaces that are highly reﬂective or are subject to rapid

temperature change, such as pools, air conditioners or heating vents.

5. Check if all wiring connections are correct, or if the main power

supply has been inadvertently connected to the L1 (Switched Live)

terminal.

1. Check if there are any white or reﬂective surfaces in the detection

area and adjust the sensor to a different direction or adjust the lens

shield.

2. The sensor is more sensitive in winter. Please check again when the

temperature gets back to normal.

Rain, snow and storm can create big temperature changes that

activate the sensor. False triggering can be minimised by installing the

sensor in a protected location or to minimise the detection distance

using the meter control.

Fig. 27

C Setting of LUX, METER and TIME Knobs

for Automatic Operation (See Fig. 27).

When Walk Tests are complete, the unit can be set up for Automatic mode.

The TIME setting controls how long the unit remains illuminated following activation

and after all motion ceases.

The minimum time (fully anti-clockwise) is approx. 6 seconds, whilst the maximum

time (fully clockwise) is approx. 12 minutes. Set the control to the desired setting

between these limits.

The DUSK (LUX) control determines the level of darkness required for the unit to

start operating. The DUSK adjustment knob is indicated by the “Moon” and “Sun”

legends. We suggest an initial DUSK setting of between 2/3 and 3/4 of the way

round from the “Sun” towards the “Moon” setting.

The METER control will allow you to set the detection distance from 3 meters up to

a maximum of about 16 meters.

Adjust the METER knob as necessary to reduce the coverage until it meets the users

preference.

Note: Up to a radius of approx. 3m from the ﬂoodlight sensor there is 360º

detection coverage which is not adjustable..

• A small ﬂat blade screwdriver is applicable for all the above knobs.

TIME

METER

12 min 6 sec

1 min

5 min

3 min

LUX

13 14

5 Year Guarantee

In the unlikely event of this product becoming faulty due to

defective material or manufacture within 5 years of the date of purchase,

please return it to your supplier in the first year with proof of purchase and

it will be replaced free of charge. For years 2 to 5 or any difficulty in the

first year telephone the helpline on

020 8450 0515.

7 Technical Speciﬁcations

Input Voltage: 230V ~ 50Hz.

Load: 400W class C halogen light plus additional loads,

three 400W class C halogen lights or ﬂuorescent loads

up to 200W can be connected.

Power Consumption: Less than 1W. (Quiescent)

Detection Angle: 10º ~ 240º adjustable for the outer zone detecting range

from 3 to 16m.

360º for the inner zone detection range within a radius of

approx. 3m.

Light ON Time: Adjustable from about 6 seconds to 12 minutes.

METER

(range restriction): Adjustable 3 ~ 16m.

LUX: Adjustable “ambient light level” control.

Adjustable Angle

Sensor Head: Left or right 60º.

Floodlight: Left or right 45º.

Up 50º and down 35º.

Environmental

Protection: IP44.

Operating

Temperature: -25ºC ~ +45ºC.

Temperature

Compensation: On a very cold or hot day, the MLB/WPRO500C can

automatically adjust “detecting sensitivity” to reduce

the change of detection distance caused by the

ambient temperature change.

Designed in the U.K. 67-058-351 ISS.1

Timeguard Limited.

Victory Park, 400 Edgware Road,

London NW2 6ND

Sales Ofﬁce: 020 8452 1112

or email csc@timeguard.com

For a product brochure please contact:

Zerofour – June 2010

or email helpline@timeguard.com

HELPLINE

020 8450 0515

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Theben Scheinwerfer Handbücher

Theben

Theben TIME GUARD LIMITED LED400FLW Handbuch

Beliebte Scheinwerfer Handbücher anderer Marken

VIZULO

VIZULO Micro Martin Benutzerhandbuch

EuroLite

EuroLite LED IP FL-100 SMD Bedienungsanleitung

Cooper Wheelock

Cooper Wheelock XB12 Bedienungsanleitung

Allen + Roth

Allen + Roth 17624-000 Bedienungsanleitung

ADJ

ADJ 4 STAGE PAK Bedienungsanleitung

Cooper Lighting

Cooper Lighting EGL91SW233 Bedienungsanleitung

Max

Max 37496 Bedienungsanleitung

BEGA

BEGA 85 143 Bedienungsanleitung

Beamz

Beamz 151.226 Bedienungsanleitung

EuroLite

EuroLite LED IP FL-8 Bedienungsanleitung

Ledj

Ledj PERFORMER 36 RGB Bedienungsanleitung

Perel

Perel ELS3 Bedienungsanleitung

Perel

Perel ELS3WD Bedienungsanleitung

LumX

LumX LM 36130 Bedienungsanleitung

Xtricity

Xtricity 4-80053 Bedienungsanleitung

Stahl

Stahl 6521/4 Series Bedienungsanleitung

Ecosense

Ecosense EcoSpec Bedienungsanleitung

Ayrton

Ayrton minipanel FX Bedienungsanleitung