Thermaltake Bigwater 780e CL-W0169 Bedienungsanleitung

Bigwater 780e

CL-W0169

English English

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

All other registered trademarks belong to their respective companies. www. thermaltake.com

7 8 0 e

3U Bay Drives Liquid Cooling System

P/N : CL-W0169

Bigwater 780e

CL-W0169

English English

Limited Liability

These warranties replace all other warranties, expressed or implied including,

but not limited to, the implied warranties of merchantability and fitness for a

particular purpose.

Thermaltake disclaims all other warranties, expressed or implied including,

without limitation, implied warranties of merchantability and fitness for a particular

purpose.

Some jurisdictions do not allow the exclusion of implied warranties so this

limitation may not apply to you. All expressed and implied warranties are limited in

duration to the limited warranty period. No warranties apply after that period, some

jurisdiction do not allow limitation on how long an implied warranty lasts, so this

limitation may not apply to you.

Limitations of liability, Thermaltake's responsibility under this, or any other

warranty, implied or expressed, are limited to repair or replacement, as set forth

above. These remedies are the sole and exclusive remedies for any breach of

warranty. Thermaltake is not responsible for direct, special, incidental, or

consequential damages resulting from any breach of warranty or under any other

legal theory including, but not limited to, lost profits, downtime, goodwill, damage

to or replacement of equipment and property, and any cost of recovering,

reprogramming, or reproducing any program or data stored in or used with a

system containing Thermaltake product. Some jurisdictions do not allow the

exclusion or limitation of incidental or exclusions may not apply to you.

Extent of limited warranty, Thermaltake does not warrant that your product will

be free from design defects or errors known as "ERRATA". Current characterized

errata are available upon request. This limited warranty does not cover any costs

relating to removal or replacement of any part that is soldered or otherwise affixed

to your system's motherboard. This limited warranty does not cover damages due

to external causes, including accidental, problems with electrical power, usage not

in accordance with product instructions, misuse, neglect, alteration, repair,

improper installation, or improper testing. Nor is Thermaltake held liable for any

bodily damage that may result during the installation, maintenance, repair, or is

otherwise associated with this product, Thermaltake is free from any legal actions

that may result in death, pain and anguish, or any other form of personal damage

that may occur by purchasing this product.

You, the buyer, agree to this warranty and its term set within its expressed and

implied limited warranty. This limited warranty gives you specific legal rights, and

you may also have other right that varies from jurisdiction to jurisdiction.

CAUTION

Before installing Thermaltake Bigwater 780e

Liquid Cooling System, we strongly suggest you

to read the manual throughly and make sure all

components are included in the package. Please

do follow the installation guide step-by-step.

Improper installation may cause serious

damage to the system as well as to the water

cooling unit. Thermaltake will not responsible for

any damages due to incorrect installation and

incorrect usage of this product.

Bigwater 780e

CL-W0169

English English

01 02

1.1 Specification

Chapter 1. Product Introduction

Water Bloc

3U Bay Dri ves

P/N CL-W0169

Pump

Radiator

Weight

Dimen sio n

Fan

Liquid Tank

Tube

Coolant

CPU

Application

Contents

Chapter 1. Product Introduction

Chapter 2. Liquid Cooling Installation Steps

Specification

Components check

Chapter 3. Thermaltake ESA Watercooling

Software User Guide

1.1

1.2

Chapter 4. Other

Intel LGA 775

Intel P4 478

AMD K8

AMD AM2 / AM2+

Install Water tube

Install the Main Unit

ESA PCB Introduction

ESA PCB Installation

System Update

NVIDIA nTune Performance Application

NVIDIA Monitor

Switch between NVIDIA Monitor & NVIDIA Performance software

Water cooling LED Indication

Armor Plus ESA Series (optional)

Toughpower ESA power supply series (optional)

Liquid Cooling Q&A

Schedule Maintenance

Install the main unit

Connect the Quickconn connector

Refill Coolant

Power on the system

Installation waterblock

2.1

2.2

2.3

2.4

2.5

2.6

2.7

2.8

3.1

3.2

3.3

3.4

3.5

4.1

4.2

4.3

4.4

STEP1

STEP2

STEP3

STEP4

STEP5

249.5 mm(L ) X 149m m(W) X 1 28mm (H)

1.74( kg)

AMD AM2 / AM2 +

AMD K8

Intel L GA77 5

Intel P 4

Dimen sion

Bearing

Maxim um Cap acit y

Rated Vo ltag e

Input c urre nt

Conne ctor

Noise

Life ti me

Conne ctor

75(L) x 7 0(W) x 7 5(H) m m

Ceram ic bea ring

500 L/ hr

DC 12V

600 mA( MAX)

4 pin

10 ~16 dB A

80000 h r (MTB F)

4-Pin P WM fun ctio n

Dimen sion

Mater ial

Tub e Desi gn

Fin Des ign

Tub ing & Ho es Cli p

Fan Dim ensi on

Fan Spe ed

Rated Vo ltag e

Noise

Life Ex pect ancy

Conne ctor

Dimen sion

Capac ity

Mater ial

Dimen sion

Tub ing & Ho es Cli p

Weig ht

Dimen sion s

Mater ial

Capac ity

Major M ater ial In gred ient

All cop per de sign ed

58mm( L) X 58m m(W) X 3 5mm( H)

For 9.5 mm ID (3 /8") t ubin g

318(g )

9.5mm I D(3/ 8") tu be

Green U V

1000 c. c

Propy lene G lyco l

130.2 ( L) x 107 .2(W ) x 51.5 (H) mm

530 c.c

120(L ) x 120( w) x 25( H) mm

800~2 500 RP M(PW M)

12V

10 ~20 dB

30,00 0 hr

4-Pin P WM fun ctio n

153(L ) x 120( W) x 28( H) mm

Alumi num

Alumi num, D impl e

Alumi num, L ouve red

For 9.5 mm ID (3 /8") t ubin g

Bigwater 780e

CL-W0169

English English

03 04

1.2 Components check

Bag(A)

Bag(B)

Bag(C)

DEF

A - Metal H-type clip

B - Cushion

C - Insulator

D - 50mm

E - Thumb nuts x4

F - White washers x4

G - Thermal compound

H - 38mm screws x4

I - Stand offs x4

J - Red washers x4

screws x4

K - Quickconn Connecter X2

L - Hose clips(for tube) x4

M - 5mm screws x 10

Clips for :

- Intel LGA 775 & P4 478

- AMD AM2+ / AM2 & K8

All copper water block

main unit

Water tube

Transparent UV tube (3/8")

UV sensitive 1000 cc

Coolant x 1

Refill Bottle

2.1 Liquid Cooling Installation steps

Components check

2.1 Intel LGA 775

2.2 Intel P4 478

2.3 AMD K8

2.4 AMD AM2 / AM2+

2.5 Install Water tube

2.6 Install the Main Unit

2.7 ESA PCB Introduction

2.8 ESA PCB Installation

We strongly suggest the following installation

procedures. Failure to comply may result in

leaks and damaged components.

Install Waterblock

Install the Main Unit

Refill Coolant

Connect the Quickconn connector

Power on the system

Complete installation

Chapter2 Liquid Cooling Installation

P05

P03

P17

P21

P24

STEP1

STEP2

STEP3

STEP4

STEP5

Bigwater 780e

CL-W0169

English English

05 06

2.1 Intel LGA 775 - Secure Waterblock onto CPU

2.1.1 Install the Clip on Motherboard

>> Install waterblock

2.1.2 Install Waterblock on Motherboard

Intel LGA 775

Motherboard

Components for

LGA 775:

Tear off the tape on the

back of the insulator (C)

and place it on the metal

H-type clip(A).

Combine the insulator(C) and

the cushion (B) using the

adhesive. Stick the metal H-type

clip(A) with the insulators (BC).

Tear off the protective layer to

adhere it onto the motherboard.

Attach H-type clips(including

ABC)on the back side of

motherboard.

Note: Placing the cushion onto the

motherboard with the adhesive will

prevent you from removing the cushion

in the future. If you are planning to remove

the cushion for future use, please don't

remove the protective tape.

A-Metal H-type clip

B-Cushion

C-Insulator

D-50mm screws

E-Thumb nuts

G-Thermal compound

I -Stand offs

J -Red washers

Exploded View Completed View

1.Insert the screws (D) through the clip(ABC)

into the four holes on the Motherboard.

2.Put the washers (J) along the screws to prevent

the electric current.

3.Put the stand offs (I) along the screws to fix the

screws on the motherboard.

4.Apply a thin layer of thermal compound(G) onto

the processor.

5.Place waterblock on the processor through the

screws and fix it by thumb nuts(E).

Note:

STEP1

Bigwater 780e

CL-W0169

English English

07 08

2.2 Intel P4 Socket 478 - Secure Waterblock onto CPU

2.2.1 Install the Clip on Motherboard

2.2.2 Install Waterblock on Motherboard

Intel P4 478

Motherboard

Components for

P4 478 :

Tear off the tape on the

back of the insulator (C)

and place it on the metal

H-type clip(A).

Note: Placing the cushion onto the

motherboard with the adhesive will

prevent you from removing the cushion

in the future. If you are planning to

remove the cushion for future use, please

don't remove the protective tape.

A-Metal H-type clip

B-Cushion

C-Insulator

D-50mm screws

E-Thumb nuts

G-Thermal compound

I -Stand offs

J -Red washers

Combine the insulator(C) and

the cushion (B) using the

adhesive. Stick the metal H-type

clip(A) with the insulators (BC).

Tear off the protective layer to

adhere it onto the motherboard.

Attach H-type clips(including

ABC)on the back side of

motherboard.

Exploded View

Note:

1.Insert the screws (D) through the clip(ABC)

into the four holes on the Motherboard.

2.Put the washers (J) along the screws to prevent

the electric current.

3.Put the stand offs (I) along the screws to fix the

screws on the motherboard.

4.Apply a thin layer of thermal compound(G) onto

the processor.

5.Place waterblock on the processor through the

screws and fix it by thumb nuts(E).

Completed View

Bigwater 780e

CL-W0169

English English

09 10

2.3.1

motherboard back plate

Standard installation - Install waterblock by

2.3

Waterblock onto CPU

AMD K8 Socket 754 / 939 / 940 - Secure

2.3.1.1 Check The Back Plate

Exploded View

2.3.2.1 Install the Clip on Motherboard

2.3.2 Install waterblock by clips included in package

2.3.1.2 Install Waterblock on Motherboard

AMD K8

Motherboard

Components for

AMD K8:

G-Thermal compound

H-38mm screws

Remove the retention

frame from motherboard.

Check Your Back Plate!

A. If the back plate does have threaded

standoffs, please continue with standard

installation 2.3.1.

B. If the back plate does NOT have

threaded standoffs, please continue

with 2.3.2.

Completed View

1.Apply a thin layer of thermal compound(G)

onto the processor.

2.Place waterblock on the processor.

3.Secure the waterblock on the motherboard by

using screws(H).

AMD K8 Motherboard

A-Metal H-type clip

B-Cushion

C-Insulator

D-50mm screws

E-Thumb nuts

F-White washers

G-Thermal compound

I -Stand offs

Components for

AMD K8:

Remove the retention

module from the motherboard.

Remove the back plate on

back side of motherboard.

Tear off the tape on the back of

the insulator (C) and place it on

the metal H-type clip(A).

Note: Placing the cushion onto

the motherboard with the

adhesive will prevent you from

removing the cushion in the

future. If you are planning to

remove the cushion for future

use, please don't remove the

protective tape.

DEF

Bigwater 780e

CL-W0169

English English

11 12

2. Secure Waterblock onto CPU (AMD Socket AM2 /

AM2+)

2.4.1

motherboard back plate

Standard installation - Install waterblock by

2.4.1.1 Check The Back Plate

Exploded View

Combine the insulator(C) and the

cushion (B) using the adhesive.

Stick the metal H-type clip(A) with the

insulators (BC). Tear off the protective

layer to adhere it onto the motherboard.

Attach H-type clips(including

ABC)on the back side of

motherboard.

2.3.2.2 Install Waterblock on Motherboard

Exploded View Completed View

1.Insert the screws (D) through the clip(ABC)

into the two holes on the Motherboard.

2.Put the washers (F) along the screws to prevent

the electric current.

3.Put the stand offs (I) along the screws to fix the

screws on the motherboard.

4.Apply a thin layer of thermal compound(G) onto

the processor.

5.Place waterblock on the processor through the

screws and fix it by thumb nuts(E).

AMD AM2

Motherboard

Components for

AMD AM2/AM2+:

G-Thermal

compound

H-38mm screws

Remove the retention

frame from motherboard.

2.4.1.2 Install Waterblock on Motherboard

Check Your Back Plate!

Completed View

1.Apply a thin layer of thermal compound(G)onto

the processor.

2.Place waterblock on the processor.

3.Secure the waterblock on the motherboard

by using screws(H).

A. If the back plate does have threaded

standoffs, please continue with

standard installation 2.4.1.

B. If the back plate does NOT have

threaded standoffs, please continue

with 2.4.2.

Bigwater 780e

CL-W0169

English English

13 14

2.4.2.1 Install the Clip on Motherboard

2.4.2 Install waterblock by clips included in package

A-Metal H-type clip

B-Cushion

C-Insulator

D-50mm screws

E-Thumb nuts

F-White washers

G-Thermal compound

I -Stand offs

Components for AMD AM2/AM2+ :

AMD AM2 Motherboard

Remove the retention

module from the motherboard.

Remove the back plate on

back side of motherboard.

Tear off the tape on the back of

the insulator (C) and place it on

the metal H-type clip(A).

Note: Placing the cushion onto

the motherboard with the

adhesive will prevent you from

removing the cushion in the

future. If you are planning to

remove the cushion for future

use, please don't remove the

protective tape.

DEF

2.4.2.2 Install Waterblock on Motherboard

Combine the insulator(C) and the

cushion (B) using the adhesive.

Stick the metal H-type clip(A) with the

insulators (BC). Tear off the protective

layer to adhere it onto the motherboard.

Attach H-type clips(including

ABC)on the back side of

motherboard.

Exploded View Completed View

1.Insert the screws (D) through the clip(ABC)

into the four holes on the motherboard.

2.Put the washers (F) along the screws to prevent

the electric current.

3.Put the stand offs (I) along the screws to fix the

screws on the motherboard.

4.Apply a thin layer of thermal compound(G) onto

the processor.

5.Place waterblock on the processor through the

screws and fix it by thumb nuts(E).

Bigwater 780e

CL-W0169

English English

15 16

2.5 Install Water tube

Remove black rubber caps from

the waterblock.

Insert the hose clip through

the tube. Connect the tube with

the waterblock.

Use pliers to tighten the hose clips.

Repeat the steps for the other side.

First determine the length required for

tubing from waterblock to the main

unit. Then cut the tubing accordingly.

Insert the hose clips and

male quick connector

through the tube.

Use pliers to tighten

the hose clips. Repeat the

steps for the other side.

Install Quickconn Connecter

Out

CPU Waterblock

3U bay liquid cooling system

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Thermaltake Computerhardware Handbücher

Thermaltake

Thermaltake Pacific MX2 Ultra Bedienungsanleitung

Thermaltake

Thermaltake Pacific MX1 Plus Bedienungsanleitung

Thermaltake

Thermaltake Pacific Core P8 DP-D5 Plus Bedienungsanleitung

Thermaltake

Thermaltake TOUGHLIQUID Ultra 280 Bedienungsanleitung

Thermaltake

Thermaltake Pacific W5 Bedienungsanleitung

Thermaltake

Thermaltake Pacific V-RTX 4090 Plus Bedienungsanleitung

Thermaltake

Thermaltake TH240 ARGB Sync Bedienungsanleitung

Thermaltake

Thermaltake UX100 Bedienungsanleitung

Thermaltake

Thermaltake Floe Ultra 240 RGB Bedienungsanleitung

Thermaltake

Thermaltake CL-W279-CU00SW-A Bedienungsanleitung

Thermaltake

Thermaltake CL-P0540 Bedienungsanleitung

Thermaltake

Thermaltake Level 10 GT Battle Edition VN10008W2N Bedienungsanleitung

Thermaltake

Thermaltake A1827 Bedienungsanleitung

Thermaltake

Thermaltake Tai-Chi VB5001SNA Bedienungsanleitung

Thermaltake

Thermaltake TH120 ARGB Sync Bedienungsanleitung

Thermaltake

Thermaltake Pacific PR12-D5 Plus Bedienungsanleitung

Thermaltake

Thermaltake Water 3.0 Riing RGB 360 Bedienungsanleitung

Thermaltake

Thermaltake Water 3.0 Extreme S Bedienungsanleitung

Thermaltake

Thermaltake Toughpower 850 B Bedienungsanleitung

Thermaltake

Thermaltake C240 Bedienungsanleitung

Thermaltake

Thermaltake Riing Silent 12 Sync Bedienungsanleitung

Thermaltake

Thermaltake Pacific Gaming RL240 D5 Bedienungsanleitung

Thermaltake

Thermaltake TH240 ARGB Sync Bedienungsanleitung

Thermaltake

Thermaltake Pacific MX2 Plus Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung